sam <[email protected]> wrote in news:MPG.254edd083b39f29e9899d7
@news.supernews.com:
> I want to try to paint a couple of bookcases brick
> red on the inside and forest green on the outside.
> I've seen it done elsewhere and it looks great, but
> what *exact* colors should I ask for so it doesn't
> look like a Christmas decoration?
>
> Thanks,
>
> s
>
It's up to you, so head out to the pain departement and start looking.
(No, that's not a typo.)
I'd suggest something along the lines of brick red and ivy green, like
what Wrigley Field has.
Puckdropper
--
"The potential difference between the top and bottom of a tree is the
reason why all trees have to be grounded..." -- Bored Borg on
rec.woodworking
To email me directly, send a message to puckdropper (at) fastmail.fm
"Larry C" wrote:
> As noted in a different post, I am also building a couple of
> bookcases. I never thought about the latex paint issue, thanks
> Larry B. I have never used milk paint before. Could those of you
> have please give me an idea of the cure time. Basically the time I
> need to wait after I paint them until I drop the cases off at the
> local school. The cases will be painted in my cellar. An average
> of 65 degrees. Not that humid now that summer is over.
If you can get it in your area, take a look at oil based "Porch and
Floor Enamel".
In addition to wearing well, probably have the colors you are looking
for.
Lew
On Wed, 28 Oct 2009 08:09:23 -0400, J. Clarke wrote:
> Phisherman wrote:
>>
>> I painted my bookcases interiors with a very dark latex and a primer
>> underneath. I allowed the bookcases to completely cure for 2-3 months
>> before waxing, buffing and loading up with books. It has had use for
>> 15 years and never had any stickyness or damage and still looks good.
>
> The keyword you need to look for is "non-blocking". If it's
> "non-blocking" then it's not sticky to books and the like. Some latex
> is non-blocking, some isn't.
>
Thanks - I knew I forgot something. But IIRC it is true that darker
colors are less likely to be non-blocking.
I don't remember ever seeing a latex can that said non-blocking on it,
but its been a few years since I used latex. I'll read some cans next
time I'm in an appropriate store.
--
Intelligence is an experiment that failed - G. B. Shaw
"Puckdropper" <puckdropper(at)yahoo(dot)com> wrote in message
news:[email protected]...
> sam <[email protected]> wrote in news:MPG.254edd083b39f29e9899d7
> @news.supernews.com:
>
>> I want to try to paint a couple of bookcases brick
>> red on the inside and forest green on the outside.
>> I've seen it done elsewhere and it looks great, but
>> what *exact* colors should I ask for so it doesn't
>> look like a Christmas decoration?
(snip)
I would go to http://benjaminmoore.com/ or another paint vendor website and
play with the color wheels. They usually have photos that you can change
the color of and see how different colors will look next to each other.
They probably will not have a bookcase but a wall and a ceiling should let
you take a look
Larry C
In article <[email protected]>, sam
<[email protected]> wrote:
> I want to try to paint a couple of bookcases brick
> red on the inside and forest green on the outside.
> I've seen it done elsewhere and it looks great, but
> what *exact* colors should I ask for so it doesn't
> look like a Christmas decoration?
Shellac.
"Pat Barber" <[email protected]> wrote in message
news:[email protected]...
>I would create a "very" small version made from MDF
> and try my colors on that prior to the final version.
>
> All you need is a side and a shelf cobbled together
> to get some idea of the appearance.
>
> Colors are too varied to even guess what you might
> perceive as pretty.
>
> sam wrote:
>> I want to try to paint a couple of bookcases brick
>> red on the inside and forest green on the outside.
>> I've seen it done elsewhere and it looks great, but
>> what *exact* colors should I ask for so it doesn't
>> look like a Christmas decoration?
>>
>> Thanks,
>>
>> s
>>
As noted in a different post, I am also building a couple of bookcases. I
never thought about the latex paint issue, thanks Larry B. I have never
used milk paint before. Could those of you have please give me an idea of
the cure time. Basically the time I need to wait after I paint them until I
drop the cases off at the local school. The cases will be painted in my
cellar. An average of 65 degrees. Not that humid now that summer is over.
Thanks
Larry C
We built 33 bookcases for this house to add to the ones we brought and
painted the new ones all black. They are simple in design, but strong
and the almost not there look improves the display of thousands of books.
Martin
Larry Blanchard wrote:
> On Wed, 28 Oct 2009 08:09:23 -0400, J. Clarke wrote:
>
>> Phisherman wrote:
>
>>> I painted my bookcases interiors with a very dark latex and a primer
>>> underneath. I allowed the bookcases to completely cure for 2-3 months
>>> before waxing, buffing and loading up with books. It has had use for
>>> 15 years and never had any stickyness or damage and still looks good.
>> The keyword you need to look for is "non-blocking". If it's
>> "non-blocking" then it's not sticky to books and the like. Some latex
>> is non-blocking, some isn't.
>>
> Thanks - I knew I forgot something. But IIRC it is true that darker
> colors are less likely to be non-blocking.
>
> I don't remember ever seeing a latex can that said non-blocking on it,
> but its been a few years since I used latex. I'll read some cans next
> time I'm in an appropriate store.
>
In article <[email protected]>,
[email protected] says...
>
> On Sun, 25 Oct 2009 23:09:50 -0500, sam wrote:
>
> > I want to try to paint a couple of bookcases brick red on the inside and
> > forest green on the outside. I've seen it done elsewhere and it looks
> > great, but what *exact* colors should I ask for so it doesn't look like
> > a Christmas decoration?
> >
> Whatever colors you choose, don't use latex paint. It never completely
> hardens, and the darker the colors the worse the problem. If you set a
> heavy load (like a book) on a latex painted surface and leave it there it
> will eventually stick to the surface.
>
> I'd suggest milk paint with possible oil or shellac overcoat.
Thanks for all the good information.
Milk paints sound very promising.
s
I would create a "very" small version made from MDF
and try my colors on that prior to the final version.
All you need is a side and a shelf cobbled together
to get some idea of the appearance.
Colors are too varied to even guess what you might
perceive as pretty.
sam wrote:
> I want to try to paint a couple of bookcases brick
> red on the inside and forest green on the outside.
> I've seen it done elsewhere and it looks great, but
> what *exact* colors should I ask for so it doesn't
> look like a Christmas decoration?
>
> Thanks,
>
> s
>
Phisherman wrote:
> On Tue, 27 Oct 2009 00:43:49 -0500, sam <[email protected]> wrote:
>
>> In article <[email protected]>,
>> [email protected] says...
>>>
>>> On Sun, 25 Oct 2009 23:09:50 -0500, sam wrote:
>>>
>>>> I want to try to paint a couple of bookcases brick red on the
>>>> inside and forest green on the outside. I've seen it done
>>>> elsewhere and it looks great, but what *exact* colors should I ask
>>>> for so it doesn't look like a Christmas decoration?
>>>>
>>> Whatever colors you choose, don't use latex paint. It never
>>> completely hardens, and the darker the colors the worse the
>>> problem. If you set a heavy load (like a book) on a latex painted
>>> surface and leave it there it will eventually stick to the surface.
>>>
>>> I'd suggest milk paint with possible oil or shellac overcoat.
>>
>> Thanks for all the good information.
>>
>> Milk paints sound very promising.
>>
>> s
>
>
> I painted my bookcases interiors with a very dark latex and a primer
> underneath. I allowed the bookcases to completely cure for 2-3
> months before waxing, buffing and loading up with books. It has had
> use for 15 years and never had any stickyness or damage and still
> looks good.
The keyword you need to look for is "non-blocking". If it's "non-blocking"
then it's not sticky to books and the like. Some latex is non-blocking,
some isn't.
BTW, remember not to assume that waterborne=latex--it doesn't anymore.
"sam" <[email protected]> wrote in message
news:[email protected]...
>I want to try to paint a couple of bookcases brick
> red on the inside and forest green on the outside.
> I've seen it done elsewhere and it looks great, but
> what *exact* colors should I ask for so it doesn't
> look like a Christmas decoration?
>
> Thanks,
>
> s
>
Scroll about half way down to the Milk Paints and see the color choices.
Typically you can use as a regular paint and IIRC you end up with a "FLAT"
finish. If you wat a bit more sheen and more protection add a layer or two
of varnish on top. Typically these milk paints can be applied like regular
paint and some allow you to wipe away excess for a stained look.
I have found them very easy to apply with a brush.
http://generalfinishes.com/finishes/water-base-finishes/waterbase_finishes.htm
On Tue, 27 Oct 2009 00:43:49 -0500, sam <[email protected]> wrote:
>In article <[email protected]>,
>[email protected] says...
>>
>> On Sun, 25 Oct 2009 23:09:50 -0500, sam wrote:
>>
>> > I want to try to paint a couple of bookcases brick red on the inside and
>> > forest green on the outside. I've seen it done elsewhere and it looks
>> > great, but what *exact* colors should I ask for so it doesn't look like
>> > a Christmas decoration?
>> >
>> Whatever colors you choose, don't use latex paint. It never completely
>> hardens, and the darker the colors the worse the problem. If you set a
>> heavy load (like a book) on a latex painted surface and leave it there it
>> will eventually stick to the surface.
>>
>> I'd suggest milk paint with possible oil or shellac overcoat.
>
>Thanks for all the good information.
>
>Milk paints sound very promising.
>
>s
I painted my bookcases interiors with a very dark latex and a primer
underneath. I allowed the bookcases to completely cure for 2-3
months before waxing, buffing and loading up with books. It has had
use for 15 years and never had any stickyness or damage and still
looks good.
On Sun, 25 Oct 2009 23:09:50 -0500, sam wrote:
> I want to try to paint a couple of bookcases brick red on the inside and
> forest green on the outside. I've seen it done elsewhere and it looks
> great, but what *exact* colors should I ask for so it doesn't look like
> a Christmas decoration?
>
Whatever colors you choose, don't use latex paint. It never completely
hardens, and the darker the colors the worse the problem. If you set a
heavy load (like a book) on a latex painted surface and leave it there it
will eventually stick to the surface.
I'd suggest milk paint with possible oil or shellac overcoat.
--
Intelligence is an experiment that failed - G. B. Shaw