Greetings Woodworkers,
I am going to make some new wooden baseboards for my house and would
like some recommendations regarding the best type of lumber to use.
Will pine be sufficiently durable to withstand years of wear and tear,
or should I consider using a hardwood? What grade lumber should I
look for? I intend to paint the boards, so knots should not present a
problem unless it will make it too difficult to shape the boards with
my router.
Thanks for any information you can provide.
Sincerely,
JH
[email protected] wrote:
> Greetings Woodworkers,
>
> I am going to make some new wooden baseboards for my house and would
> like some recommendations regarding the best type of lumber to use.
>
> Will pine be sufficiently durable to withstand years of wear and tear,
> or should I consider using a hardwood? What grade lumber should I
> look for? I intend to paint the boards, so knots should not present a
> problem unless it will make it too difficult to shape the boards with
> my router.
As others say, poplar is good...works well, holds paint well, relatively
inexpensive, harder than pine so less subject to dings, etc. As far as
grade goes, I'd use #1 common and fill any bad areas with auto body compound
(Bondo). Sanded smooth after filling and with a coat of good primer and you
are good to go for the top paint - which I sincerely hope will be an oil
based one.
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
On Tue, 03 Mar 2009 02:35:50 -0500, Gerald Ross <[email protected]>
wrote:
>
>This makes my back ache.
...year, that lower *lumbar* region...I feel your pain!
cg
<[email protected]> wrote in message
news:da3d92ad-aa1a-4e82-8d64-9982b6e6883d@r15g2000prh.googlegroups.com...
Poplar is popular
but pine is fine
In article <d74a049f-9c80-4018-b0dd-
[email protected]>, [email protected] says...>
> Greetings Woodworkers,
>
> I am going to make some new wooden baseboards for my house and would
> like some recommendations regarding the best type of lumber to use.
>
> Will pine be sufficiently durable to withstand years of wear and tear,
> or should I consider using a hardwood? What grade lumber should I
> look for? I intend to paint the boards, so knots should not present a
> problem unless it will make it too difficult to shape the boards with
> my router.
>
> Thanks for any information you can provide.
>
> Sincerely,
> JH
Whatever kind of wood you use, you need to put
your back into it.
s
Normally one looks at the machine ability of the wood.
and popular is often used. All wood hardens over time.
If you want oak to match something and stain it - use that.
If you plan on painting - use popular.
You want kiln dried.
Martin
[email protected] wrote:
> Greetings Woodworkers,
>
> I am going to make some new wooden baseboards for my house and would
> like some recommendations regarding the best type of lumber to use.
>
> Will pine be sufficiently durable to withstand years of wear and tear,
> or should I consider using a hardwood? What grade lumber should I
> look for? I intend to paint the boards, so knots should not present a
> problem unless it will make it too difficult to shape the boards with
> my router.
>
> Thanks for any information you can provide.
>
> Sincerely,
> JH
Since you can buy baseboard cheaper than the
material needed to make it and is already
primed, why on earth would you want to make
your own baseboard ?
Is this a very strange pattern possibly ?
Do you have shaper and power feeder ?
Primed MDF baseboard is your friend.
[email protected] wrote:
> Greetings Woodworkers,
>
> I am going to make some new wooden baseboards for my house and would
> like some recommendations regarding the best type of lumber to use.
>
> Will pine be sufficiently durable to withstand years of wear and tear,
> or should I consider using a hardwood? What grade lumber should I
> look for? I intend to paint the boards, so knots should not present a
> problem unless it will make it too difficult to shape the boards with
> my router.
>
> Thanks for any information you can provide.
>
> Sincerely,
> JH
I was thinking MDF is pretty common no?
On Mar 2, 7:08=A0pm, "[email protected]" <[email protected]> wrote:
> Greetings Woodworkers,
>
> I am going to make some new wooden baseboards for my house and would
> like some recommendations regarding the best type of lumber to use.
>
> Will pine be sufficiently durable to withstand years of wear and tear,
> or should I consider using a hardwood? =A0What grade lumber should I
> look for? =A0I intend to paint the boards, so knots should not present a
> problem unless it will make it too difficult to shape the boards with
> my router.
>
> Thanks for any information you can provide.
>
> Sincerely,
> JH
On Mar 2, 9:08=A0pm, "[email protected]" <[email protected]> wrote:
> Greetings Woodworkers,
>
> I am going to make some new wooden baseboards for my house and would
> like some recommendations regarding the best type of lumber to use.
>
If you are planning on using "standard" profiles, that plastic stuff
they sell at Lowes and HD will last and last and takes paint well.
Once painted, only you would know if it was pine or oak.
On Wed, 04 Mar 2009 22:01:56 GMT, "Tim W"
<[email protected]> wrote:
>
>"bw" <[email protected]> wrote in message
>news:[email protected]...
>>
>> "Tim W" <[email protected]> wrote in message
>> news:[email protected]...
>>>
>>> <[email protected]> wrote in message
>>> news:da3d92ad-aa1a-4e82-8d64-9982b6e6883d@r15g2000prh.googlegroups.com...
>>>
>>> Poplar is popular
>>>
>>> but pine is fine
>>
>> Cherry is merry.
>Oak will take a soak
>
Redwood is lighter than that wood.
"Tim W" <[email protected]> wrote in message
> >> Poplar is popular
> >>
> >> but pine is fine
> >
> > Cherry is merry.
> Oak will take a soak
Maple is papal, but ash will take a bash.
On Mar 2, 8:06=A0pm, "Martin H. Eastburn" <[email protected]>
wrote:
> Normally one looks at the machine ability of the wood.
> and popular is often used. =A0All wood hardens over time.
>
> If you want oak to match something and stain it - use that.
>
> If you plan on painting - use popular.
>
> You want kiln dried.
>
> Martin
>
> [email protected] wrote:
> > Greetings Woodworkers,
>
> > I am going to make some new wooden baseboards for my house and would
> > like some recommendations regarding the best type of lumber to use.
>
> > Will pine be sufficiently durable to withstand years of wear and tear,
> > or should I consider using a hardwood? =A0What grade lumber should I
> > look for? =A0I intend to paint the boards, so knots should not present =
a
> > problem unless it will make it too difficult to shape the boards with
> > my router.
>
> > Thanks for any information you can provide.
>
> > Sincerely,
> > JH
Poplar is also popular
"Tim W" <[email protected]> wrote in message
news:[email protected]...
>
> <[email protected]> wrote in message
> news:da3d92ad-aa1a-4e82-8d64-9982b6e6883d@r15g2000prh.googlegroups.com...
>
> Poplar is popular
>
> but pine is fine
Cherry is merry.
"bw" <[email protected]> wrote in message
news:[email protected]...
>
> "Tim W" <[email protected]> wrote in message
> news:[email protected]...
>>
>> <[email protected]> wrote in message
>> news:da3d92ad-aa1a-4e82-8d64-9982b6e6883d@r15g2000prh.googlegroups.com...
>>
>> Poplar is popular
>>
>> but pine is fine
>
> Cherry is merry.
Oak will take a soak
On Tue, 3 Mar 2009 10:57:32 -0800 (PST), "SonomaProducts.com"
<[email protected]> wrote:
>I was thinking MDF is pretty common no?
...works like a charm...and when you fill *it* with bondo the patch is
more likely to remain invisible. I use it all the time, but *never*
in any situation where water may be an issue. (It's wonderful for
crown.) I do a lot of apartment remodels/move-out clean-ups and have
benifit of seeing work spanning back 15-20 years in some cases...it
holds up well. Much base gets hidden by furniture etc, and therefore
not so prone to getting dinged.
All that said, if it's my house I'm probably going poplar...
cg
<snip>