In article <[email protected]>, Barbara Bailey
<[email protected]> wrote:
> My sister suggests that #610 may be some sort of fruit-picker gadget
> (apples most likely) or similar.
I think that's a damned good suggestion...
--
Talking about art is like dancing about architecture - Frank Zappa
I think it has to do with working with ice. I don't know the
specific application.
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"R.H." <[email protected]> wrote in message
news:[email protected]...
>
> "Julie Waters" <[email protected]> wrote in message
> news:[email protected]...
>> R.H. wrote:
>> >>>It is generally used in the kitchen, but not for these
>> >>>purposes.
>> >>
>> >>Does it have anything to do with deep frying something?
>> >
>> > It isn't used for any type of cooking or food preparation.
>>
>> Does it have anything to do with coals or stoking fires?
>
>
> It doesn't have anything to do with fire or heat.
>
>
> Rob
>
>
R.H. wrote:
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
606: piercer of some kind. Something to do with demolitions, maybe?
607: rope cleat from a boat
608: ice crampon (clips to shoe)
609: pocket multi-tool/thread checker (advertising the Make Tight Stay)
610: unknown, looks dangerous
611: close-up of a basketball
On Thu, 09 Mar 2006 09:38:22 GMT, "R.H." <[email protected]> wrote:
>The latest set has just been posted:
>
>http://puzzlephotos.blogspot.com/
>
>
>Rob
>
My sister suggests that #610 may be some sort of fruit-picker gadget
(apples most likely) or similar.
Barb
According to R.H. <[email protected]>:
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
As usual, posting from rec.crafts.metalworking.
606) Hmm ... at a guess, this is a tool for de-caping (removing
primers) and re-priming cartridges with Berdan primers (two
small holes off center for the flame to go through to reach the
powder, instead of a single one which makes it easy to push the
primer out from inside.)
The spike digs out the old primer with the case in the notch
closest to the hinge, and the stud on the moving handle pushes
in the replacement primer in a case held in the next notch.
It would have to be a rimmed case -- and might even be for
shotgun shells, depending on the size -- though I've never dealt
with a Berdan primed shotgun shell, I guess that they could
exist.
607) A cleat for belaying a line on a boat (or wherever else you
may have a need to secure a line).
608) My first thought on seeing this was some rather nasty homemade
"brass knuckles".
However, another suggestion which I have already seen of a slip
on traction device for walking on ice might well be it.
609) I *think* that the logo on it *should* be unraveled as:
"Make the line stay tight"
The top corner is obviously intended to serve as a screwdriver.
The thread checkers in there mix quite common threads (6-32,
8-32, 10-32 and 10-24) with some less common ones (10-28 and
especially the 9-32, which I have never seen mentioned before.)
My number screw program, however, is willing to deal with it
anyway:
======================================================================
14:18:21 > number-screw 9 32
For a #9-32.000 screw:
Clearance diameter: 0.177
Tap drill diameter: 0.146
======================================================================
The primary association with the name "J. A. Sexauer" seems to
be in the plumbing field -- though since the site requires a
login, I opted not to peruse their list of products. :-)
610) It looks like some sort of special-purpose cooking tool.
Perhaps hot dogs on the spikes, the bun in the cage below the
spikes, and perhaps something like bacon on the tray behind the
spikes.
611) On this one, my first thought was a rubber gripper pad found
in the kitchen to grip and remove large bottle lids.
My wife has suggested an alternative -- the bottom of
rubber-soled shoes.
Now to see what others have answered.
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
"sewiv" <[email protected]> wrote in message
news:[email protected]...
>
> R.H. wrote:
>> The latest set has just been posted:
>>
>> http://puzzlephotos.blogspot.com/
>
>
> 606: piercer of some kind. Something to do with demolitions, maybe?
>
> 607: rope cleat from a boat
>
> 608: ice crampon (clips to shoe)
>
> 609: pocket multi-tool/thread checker (advertising the Make Tight Stay)
>
> 610: unknown, looks dangerous
>
> 611: close-up of a basketball
>
Could 610 possibly be a Cheese/Veggie Slicer/Grater?
The tines could be used to pick up the slices, the bottom and sides to slice
different thicknesses, and the indented top to grate/scrape the
cheese/veggies.
"Bill Marrs" <[email protected]> wrote in message
news:L1ZPf.6005$CT.2530@trnddc04...
> OK, Now I see it. For shotshells with Berdan primers!
Thanks, I knew it was a reloader but I couldn't find anything about it until
you mentioned what type of primers it's for.
Rob
OK, Now I see it. For shotshells with Berdan primers!
Bill
"RoyJ" <[email protected]> wrote in message
news:[email protected]...
> 606 is a deprimer /priming tool for reloading shotgun shells
>
> R.H. wrote:
>> The latest set has just been posted:
>>
>> http://puzzlephotos.blogspot.com/
>>
>>
>> Rob
>>
"RAM³" <[email protected]> wrote in message
news:[email protected]...
> "DanG" <[email protected]> wrote in message
> news:0wDQf.135975$0G.36642@dukeread10...
> >I think it has to do with working with ice. I don't know the specific
> >application.
>
> Try "Ice Pick" on for size: the tines for seperating off a set thickness
> with the "basket" to both define the thickness and catch pieces.
>
> The raised edges could be used to either scrape off dirt/sawdust [used to
> preserve ice] or to "shave" the ice block ["poor man's snow-cone
machine"].
Correct, it's an ice chipper/shaver, on the answer page I added a link to
another one on ebay and a photo of the handle which shows the manufacturer:
http://pzphotosans107j.blogspot.com/
Rob
Five of the six have been correctly identified:
606. Berdan shell reloader
607. Boat cleat
608. Ice crampon
609. Screw gauge
610. No correct guesses yet
611. Basketball close-up
A few links have been posted on the answer page:
http://pzphotosans107j.blogspot.com/
I found a few more good tools yesterday, including an unidentified piece of
hardware that hopefully someone will recognize next week.
Rob
"Julie Waters" <[email protected]> wrote in message
news:[email protected]...
> R.H. wrote:
> > It is generally used in the kitchen, but not for these purposes.
>
> Does it have anything to do with deep frying something?
>
> --julie
It isn't used for any type of cooking or food preparation.
Rob
"Julie Waters" <[email protected]> wrote in message
news:[email protected]...
> R.H. wrote:
> >>>It is generally used in the kitchen, but not for these purposes.
> >>
> >>Does it have anything to do with deep frying something?
> >
> > It isn't used for any type of cooking or food preparation.
>
> Does it have anything to do with coals or stoking fires?
It doesn't have anything to do with fire or heat.
Rob
"DanG" <[email protected]> wrote in message
news:0wDQf.135975$0G.36642@dukeread10...
>I think it has to do with working with ice. I don't know the specific
>application.
Try "Ice Pick" on for size: the tines for seperating off a set thickness
with the "basket" to both define the thickness and catch pieces.
The raised edges could be used to either scrape off dirt/sawdust [used to
preserve ice] or to "shave" the ice block ["poor man's snow-cone machine"].