Never mind, guys. I found a cabinet that I had that will fit
perfectly. Here's how it looks.
http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/28-September/28-September-7774.jpg.html
http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/28-September/28-September-7775.jpg.html
I wish it was three taller drawers instead of these four, even this is
very acceptable, esp. considering that I already had this cabinet.
i
On 2010-09-04, [email protected] <[email protected]> wrote:
> On Sep 3, 9:26?pm, Ignoramus24760 <ignoramus24...@NOSPAM.
> 24760.invalid> wrote:
>> I ave this CNC mill
>>
>> http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-M...
>>
>> And in the pendant, there is empty space where the original Heidenhain
>> control once was. There is a rectangular space inside where I could
>> fit a drawer cabinet, 10" wide, 8" tall, 10" deep. I would like to buy
>> something that would be as close as possible to this, but not exceed
>> this dimension. Two or three drawers would be ideal, I would keep
>> measuring tools, probe etc, in there to be used on the mill.
>>
>> So, where can I find something like this. Steel, wood, plastic all
>> OK. I would say that each shelf needs to hold 5 lbs of stuff.
>>
>> i
>
> Now is the time to learn woodworking and start your own wood shop
> area! Joking.
>
> Find a neighbor with a woodworking shop and trade him something for
> the shelves.
>
> Paul
On Sep 4, 8:03=A0am, Ignoramus31991 <ignoramus31...@NOSPAM.
31991.invalid> wrote:
> Never mind, guys. I found a cabinet that I had that will fit
> perfectly. Here's how it looks.
>
> http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-M...h=
ttp://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-M...
>
> I wish it was three taller drawers instead of these four, even this is
> very acceptable, esp. considering that I already had this cabinet.
>
> i
>
> On 2010-09-04, [email protected] <[email protected]> wrote:
>
> > On Sep 3, 9:26?pm, Ignoramus24760 <ignoramus24...@NOSPAM.
> > 24760.invalid> wrote:
> >> I ave this CNC mill
>
> >>http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-M..=
.
>
> >> And in the pendant, there is empty space where the original Heidenhain
> >> control once was. There is a rectangular space inside where I could
> >> fit a drawer cabinet, 10" wide, 8" tall, 10" deep. I would like to buy
> >> something that would be as close as possible to this, but not exceed
> >> this dimension. Two or three drawers would be ideal, I would keep
> >> measuring tools, probe etc, in there to be used on the mill.
>
> >> So, where can I find something like this. Steel, wood, plastic all
> >> OK. I would say that each shelf needs to hold 5 lbs of stuff.
>
> >> i
>
> > Now is the time to learn woodworking and start your own wood shop
> > area! =A0Joking.
>
> > Find a neighbor with a woodworking shop and trade him something for
> > the shelves.
>
> > Paul
Yup. looks like part of the original equipment!
Paul
On Sat, 04 Sep 2010 10:03:24 -0500, Ignoramus31991
<[email protected]> wrote:
>Never mind, guys. I found a cabinet that I had that will fit
>perfectly. Here's how it looks.
>
>http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/28-September/28-September-7774.jpg.html
>http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/28-September/28-September-7775.jpg.html
>
>I wish it was three taller drawers instead of these four, even this is
>very acceptable, esp. considering that I already had this cabinet.
Bravo!!!!
Well done!
Gunner
>
>i
>
>On 2010-09-04, [email protected] <[email protected]> wrote:
>> On Sep 3, 9:26?pm, Ignoramus24760 <ignoramus24...@NOSPAM.
>> 24760.invalid> wrote:
>>> I ave this CNC mill
>>>
>>> http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-M...
>>>
>>> And in the pendant, there is empty space where the original Heidenhain
>>> control once was. There is a rectangular space inside where I could
>>> fit a drawer cabinet, 10" wide, 8" tall, 10" deep. I would like to buy
>>> something that would be as close as possible to this, but not exceed
>>> this dimension. Two or three drawers would be ideal, I would keep
>>> measuring tools, probe etc, in there to be used on the mill.
>>>
>>> So, where can I find something like this. Steel, wood, plastic all
>>> OK. I would say that each shelf needs to hold 5 lbs of stuff.
>>>
>>> i
>>
>> Now is the time to learn woodworking and start your own wood shop
>> area! Joking.
>>
>> Find a neighbor with a woodworking shop and trade him something for
>> the shelves.
>>
>> Paul
I am the Sword of my Family
and the Shield of my Nation.
If sent, I will crush everything you have built,
burn everything you love,
and kill every one of you.
(Hebrew quote)
On 2010-09-04, Gunner Asch <[email protected]> wrote:
> On Sat, 04 Sep 2010 10:03:24 -0500, Ignoramus31991
><[email protected]> wrote:
>
>>Never mind, guys. I found a cabinet that I had that will fit
>>perfectly. Here's how it looks.
>>
>>http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/28-September/28-September-7774.jpg.html
>>http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/28-September/28-September-7775.jpg.html
>>
>>I wish it was three taller drawers instead of these four, even this is
>>very acceptable, esp. considering that I already had this cabinet.
>
> Bravo!!!!
>
> Well done!
>
Thanks Gunner. At least it will make this hole into something useful.