I'm using 0000 steel wool on poly to knock down the occasional dry bubble.
I was going to buff up with car wax after doing that and read that some
apply the wax with the steel wool. Is there any advantage to this? Also,
can you wet "sand" with the 0000. I tried it a little and it seemed to work
OK.
thanks,
dwhite
OK, thanks for the various replies.
dwhite
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Dan White" <[email protected]> wrote in message
> news:[email protected]...
> > I'm using 0000 steel wool on poly to knock down the occasional dry
bubble.
> > I was going to buff up with car wax after doing that and read that some
> > apply the wax with the steel wool. Is there any advantage to this?
Also,
> > can you wet "sand" with the 0000. I tried it a little and it seemed to
> > work
> > OK.
>
> The advantage is like killing 2 birds with 1 stone. Applying with steel
> wool eliminates the need to apply with a cloth after steel wooling. Kinda
> like applying car wax to a car before drying it off after washing.
>
>
Dan White wrote:
>
> It is SW oil based poly. Hadn't considered the rust thing. Interesting.
>
Then like other people I use the finest steel wool I have -- then a coat
of Johnsons paste wax and a bit of buffing . Works for me. ymmv
I detest the water based -- too much fuss. Aside from the issue with the
steel wool, it leaves way too many bubbles -- even when we take great
care. The speed of application can be way too slow as usually we use
poly on projects we want to finish in a hurry. I would rather use our
organic filter breathing mask and use wipe-on oil based poly. It dries
fast and takes very little extra work with the steel wool and the wax.
--
Will
Occasional Techno-geek
"Patrick Fischer" <[email protected]> wrote in message
news:[email protected]...
> Water based poly? Stay away from the steel wool as the fine particles left
> behind will begin to rust.
> I've never found an advantage to waxing with the abrasive. Sand as fine a
> you need and wax with a clean dry lint-free cloth....
> IMHO
>
> Pat..
It is SW oil based poly. Hadn't considered the rust thing. Interesting.
dwhite
>
> --
> Patrick Fischer
> Olalla, WA
> pfischer{at}wavecable.com
>
> "Everyone is entitled to my opinion"
> --David Brinkley
> "Dan White" <[email protected]> wrote in message
> news:[email protected]...
> > I'm using 0000 steel wool on poly to knock down the occasional dry
bubble.
> > I was going to buff up with car wax after doing that and read that some
> > apply the wax with the steel wool. Is there any advantage to this?
Also,
> > can you wet "sand" with the 0000. I tried it a little and it seemed to
> > work
> > OK.
> >
> > thanks,
> > dwhite
> >
> >
>
>
"Dan White" <[email protected]> wrote in message
news:[email protected]...
> I'm using 0000 steel wool on poly to knock down the occasional dry bubble.
> I was going to buff up with car wax after doing that and read that some
> apply the wax with the steel wool. Is there any advantage to this? Also,
> can you wet "sand" with the 0000. I tried it a little and it seemed to
> work
> OK.
The advantage is like killing 2 birds with 1 stone. Applying with steel
wool eliminates the need to apply with a cloth after steel wooling. Kinda
like applying car wax to a car before drying it off after washing.
"Dan White" <[email protected]> wrote in message
news:[email protected]...
> I'm using 0000 steel wool on poly to knock down the occasional dry bubble.
> I was going to buff up with car wax after doing that and read that some
> apply the wax with the steel wool. Is there any advantage to this? Also,
> can you wet "sand" with the 0000. I tried it a little and it seemed to
work
> OK.
I have, but not car wax. I use paste wax (on silicone). It is sort-of
wetsanding; the wax lubricates the wool. After the final coat of poly, I
find that its effective at removing any dust nibs that got into the final
coat and reduces the level of sheen from gloss to a satin. IMHO it leaves
the finish feeling much more touchable. Of you want to keep a glossy look,
itprobably not the right technique for you.
Practice on scrap.
-Steve
Water based poly? Stay away from the steel wool as the fine particles left
behind will begin to rust.
I've never found an advantage to waxing with the abrasive. Sand as fine a
you need and wax with a clean dry lint-free cloth....
IMHO
Pat..
--
Patrick Fischer
Olalla, WA
pfischer{at}wavecable.com
"Everyone is entitled to my opinion"
--David Brinkley
"Dan White" <[email protected]> wrote in message
news:[email protected]...
> I'm using 0000 steel wool on poly to knock down the occasional dry bubble.
> I was going to buff up with car wax after doing that and read that some
> apply the wax with the steel wool. Is there any advantage to this? Also,
> can you wet "sand" with the 0000. I tried it a little and it seemed to
> work
> OK.
>
> thanks,
> dwhite
>
>