This is a multi-part message in MIME format.
------=_NextPart_000_0008_01C67DCD.EE150340
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
I bought a butterfly template (Jasper) from woodcraft and tried it out =
tonight.
Wow! It was easier than I thought it would be. I'm using the inlay =
kit with the removable bushing on the router.
My question is : I noticed that I had to either square the corners of =
the work piece or round the corners of the inlay. Which method is =
preferred. On my practice piece I squared the corners of the work, but =
I thought that if a mistake was to be made, it would be better to make =
it on the inlay ie.round the corners. =20
What do you do?
--=20
Stoutman
http://www.garagewoodworks.com
(Featuring a NEW look)
------=_NextPart_000_0008_01C67DCD.EE150340
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.2900.2873" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I bought a butterfly template (Jasper) =
from=20
woodcraft and tried it out tonight.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Wow! It was easier than I =
thought it=20
would be. I'm using the inlay kit with the removable bushing on =
the=20
router.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>My question is : I noticed that I =
had to=20
either square the corners of the work piece or round the corners of the=20
inlay. Which method is preferred. On my practice piece I =
squared the=20
corners of the work, but I thought that if a mistake was to be made, it =
would be=20
better to make it on the inlay ie.round the corners. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>What do you do?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2><BR>-- <BR>Stoutman<BR><A=20
href=3D"http://www.garagewoodworks.com">http://www.garagewoodworks.com</A=
><BR>(Featuring=20
a NEW look) </FONT></DIV></BODY></HTML>
------=_NextPart_000_0008_01C67DCD.EE150340--
This is a multi-part message in MIME format.
------=_NextPart_000_000B_01C67DE4.14AF3500
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
Glad to see you liked my suggestion. I prefer using a single-edge razor =
blade to cut the corners - they look better squared off. The razor blade =
aligns along the edge nicely and then simply push down (if with the =
grain) or use a very small tack hammer to tap the blade into cross-grain =
to make the cuts.=20
Bob S.
"stoutman" <.@.> wrote in message =
news:[email protected]...
I bought a butterfly template (Jasper) from woodcraft and tried it out =
tonight.
Wow! It was easier than I thought it would be. I'm using the inlay =
kit with the removable bushing on the router.
My question is : I noticed that I had to either square the corners of =
the work piece or round the corners of the inlay. Which method is =
preferred. On my practice piece I squared the corners of the work, but =
I thought that if a mistake was to be made, it would be better to make =
it on the inlay ie.round the corners. =20
What do you do?
--=20
Stoutman
http://www.garagewoodworks.com
(Featuring a NEW look)=20
------=_NextPart_000_000B_01C67DE4.14AF3500
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.2900.2873" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Glad to see you liked my =
suggestion. I prefer=20
using a single-edge razor blade to cut the corners - they look =
better=20
squared off. The razor blade aligns along the edge nicely and then =
simply push=20
down (if with the grain) or use a very small tack hammer to tap the =
blade into=20
cross-grain to make the cuts. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Bob S.</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"stoutman" <.@.> wrote in message <A=20
=
href=3D"news:[email protected]">news:5Zqcg.3680=
[email protected]</A>...</DIV>
<DIV><FONT face=3DArial size=3D2>I bought a butterfly template =
(Jasper) from=20
woodcraft and tried it out tonight.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Wow! It was easier than I =
thought it=20
would be. I'm using the inlay kit with the removable bushing on =
the=20
router.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>My question is : I noticed that =
I had to=20
either square the corners of the work piece or round the corners of =
the=20
inlay. Which method is preferred. On my practice piece I =
squared=20
the corners of the work, but I thought that if a mistake was to be =
made, it=20
would be better to make it on the inlay ie.round the corners. =20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>What do you do?</FONT></DIV><FONT =
face=3DArial=20
size=3D2>
<DIV><BR>-- <BR>Stoutman<BR><A=20
=
href=3D"http://www.garagewoodworks.com">http://www.garagewoodworks.com</A=
><BR>(Featuring=20
a NEW look) </DIV>
<DIV> </DIV>
<DIV></FONT> </DIV></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_000B_01C67DE4.14AF3500--