Swingman mentioned that dynamic operations in measurements will
operate in the make version as well as the Pro. Just that you cannot
create them.
In poking around and seeing various components done with dynamic
measurements (this may not be the correct term) I found that you can
copy that component to another file and use it.
For instance I saw a particular style door wherein the author had
variable stiles, rails, and the center of the door. I could copy it to
my drawings and use them, same with cabinets, or just the ff, and so
on.
The best of course is to find one that the entire cabinet with ff and
doors where of a dynamic scale even including the dado's. I have found
a couple of those, but then when you use it you find it may be missing
a measurement you would like to have in there.
Anyhow, I hope this is clear enough and can help someone else. As it
is one trick pony!
But then I am late to this party so most everyone already knows. :)
On 2/28/2016 2:15 PM, OFWW wrote:
> Swingman mentioned that dynamic operations in measurements will
> operate in the make version as well as the Pro. Just that you cannot
> create them.
>
> But then I am late to this party so most everyone already knows.:)
Yep, most users do realize that "dynamic components" will work with
either version of SketchUp. Just one of the reasons Dynamic Components
are available on the 3D Warehouse. ;)
That said, if you really want to take the use of Dynamic Components in
kitchen design to another level, you don't own the Pro version of SU
and/or don't have the programming chops to roll your own, you might
consider someone like these guys:
http://www.sketchdata.com/
https://www.youtube.com/watch?v=76U0FV1V2Dk
They were johnny-come-lately's to the game, but did take it to another
level for those who don't have the desire to spend the time to do it
themselves.
No, I don't use the product, have heard good things about it, and
certainly embrace the concept, for that versatility is what has always
so good, and exciting, about the SketchUp software ... especially for
the price.
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
On Sun, 28 Feb 2016 14:35:26 -0600, Swingman <[email protected]> wrote:
>On 2/28/2016 2:15 PM, OFWW wrote:
>> Swingman mentioned that dynamic operations in measurements will
>> operate in the make version as well as the Pro. Just that you cannot
>> create them.
>>
>> But then I am late to this party so most everyone already knows.:)
>
>Yep, most users do realize that "dynamic components" will work with
>either version of SketchUp. Just one of the reasons Dynamic Components
>are available on the 3D Warehouse. ;)
>
>That said, if you really want to take the use of Dynamic Components in
>kitchen design to another level, you don't own the Pro version of SU
>and/or don't have the programming chops to roll your own, you might
>consider someone like these guys:
>
>http://www.sketchdata.com/
>
>https://www.youtube.com/watch?v=76U0FV1V2Dk
>
>They were johnny-come-lately's to the game, but did take it to another
>level for those who don't have the desire to spend the time to do it
>themselves.
>
>No, I don't use the product, have heard good things about it, and
>certainly embrace the concept, for that versatility is what has always
>so good, and exciting, about the SketchUp software ... especially for
>the price.
Thanks for the links, I have seen some sketchdata designs in the
catalogue. But I'll be checking this other stuff out.
What I meant by copying components was that if I liked a particular
component out of a drawing, like the door, but their ff and cabinet
stuff was weak that I could copy that out of their drawing and place
it in another file I was working with. Like mix n match. It keeps
their authorship with their component.
If I were doing this for a living I would sure purchase Sketchup for
all the other benefits. As it stands I will only get it if I can do
things no other way, which is always a possibility as one grows. :)
On 2/28/2016 3:40 PM, OFWW wrote:
> What I meant by copying components was that if I liked a particular
> component out of a drawing, like the door, but their ff and cabinet
> stuff was weak that I could copy that out of their drawing and place
> it in another file I was working with. Like mix n match. It keeps
> their authorship with their component.
In the event you haven't noticed, SU already comes with a number of
ready made "components", organized into "collections", that can be
accessed from the "component browser" (see below).
In addition, when you find a component (third party or your own
design/dynamic or otherwise) that you like and may want to reuse in the
future, you can save it to its own .skp file.
You can then import that file into SketchUp for future use in other
models using your "components browser" (found in the default tray);
and/or save it to a collection of like components using SU's component
browser's 'collection'(*2) feature for future use.
Then it's just a simple matter of selecting the component you want to
insert into your model and dragging and dropping it into the workspace
from the component browser.
(*1) - http://help.sketchup.com/en/tags/components-browser
(*2) - http://help.sketchup.com/en/article/3000118#organize-collections
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)