549 carvers screw.
"D Murphy" <[email protected]> wrote in message
news:[email protected]...
> "R.H." <[email protected]> wrote in news:WJNsf.91395$lh.53041
> @tornado.ohiordc.rr.com:
>
> > This week's photos have just been posted:
> >
> > http://puzzlephotos.blogspot.com/
>
> 545 - I think it's called a Pedometer. It measures how far you've walked.
>
> 546 - Telephone stand.
>
> 547 - Drive-in movie speaker.
>
> 548 - A bellows.
>
> 549 - Looks familiar but can't place it. Something to do with concrete
> forms?
>
> 550 - No clue.
>
> --
>
> Dan
>
"DoN. Nichols" <[email protected]> wrote in message
news:[email protected]...
> According to R.H. <[email protected]>:
> > This week's photos have just been posted:
> >
> > http://puzzlephotos.blogspot.com/
>
> O.K. Posting from rec.crafts.metalworking again, and hoping
> that it gets properly posted this time, unlike the previous two tries.
>
> 545) Pedometer -- counts steps and displays them in units of
> miles based on stride length.
>
> 546) To hold fireplace materials, perhaps?
>
> 547) Speaker from a drive-in theatre. Volume control knob is
> long gone -- perhaps broken off the shaft.
> The hook on the back keeps it in the window of the car.
Now a collectable item since many drive ins have switched to radio
broadcast now.
>
> 548) Nozzle of a fireplace bellows. A rather nice looking one,
> at that.
looks a lot like the new ones sold at Wal~Mart, made out of cheap wood,
fake leather and a hose nozzle.
>
> 549) Hmm ... not sure why the end is so sharp. It is obviously
> designed for a wrench to grip the square at the top to tighten
> it. I suspect that the two square eyes on the casting link to
> arms which apply leverage to clamp something as the screw is
> advanced -- but what is being held is not clear. I guess that
> I will have to wait for someone who has seen one in service to
> identify it.
>
> 550) Perhaps for perforating the soil around a potted plant? That
> seems within the capabilities of the spring as described.
>
> Now to see what others have guessed -- after making sure that
> the article really gets posted. :-)
>
> Enjoy,
> DoN.
>
>
>
> --
> Email: <[email protected]> | Voice (all times): (703) 938-4564
> (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
> --- Black Holes are where God is dividing by zero ---
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Wow, I think somebody got scammed. Those are furniture tacks being used
to hold on the naugahyde, and the tip is definately from a hose
fitting: see <http://tinyurl.com/dh73r>.
The bellows is similar to this one
<http://www.chipcarving.com/bellows.htm> but not as well made. I don't
think there's any way that the original is an antique.
--humunculus
In article <[email protected]>, R.H.
<[email protected]> wrote:
> This week's photos have just been posted:
>
> http://puzzlephotos.blogspot.com/
545: Wheel from a pedometer for measuring distance.
546: for holding bunches of bananas?
547: Microphone
548: end of a bellows
549: A wheel or pulley puller of some type
550: ??? A marking device of some kind?
--
Life. Nature's way of keeping meat fresh. -- Dr. Who
"humunculus" <[email protected]> wrote in message
news:[email protected]...
> Umm, NOW I am... ;-)
> http://tinyurl.com/ba2zq
>
> --humunculus
>
Thanks for the link.
Rob
According to CW <[email protected]>:
[ ... ]
> "DoN. Nichols" <[email protected]> wrote in message
> news:[email protected]...
> > 549) Hmm ... not sure why the end is so sharp. It is obviously
> > designed for a wrench to grip the square at the top to tighten
> > it.
> It's a carver's screw. Check the Rockler catalog.
I don't know Rockler. May I guess that you are posting from
rec.woodworking? I'm posting from rec.crafts.metalworking instead, and
we tend to use a different set of catalogs. :-)
I might have come up with a better guess if it had been clear
that the sharp end was threaded.
I just went and re-downloaded it, and I see that even when I
zoom into the image, the jpeg compression loses too much detail for me
to see the threads. The photos in one of the sites pointed to by others
did show the threads, which changed my perception of it.
It really needed a closeup of the sharp end, as well as the end
with the square.
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
It's a carver's screw. Check the Rockler catalog.
"DoN. Nichols" <[email protected]> wrote in message
news:[email protected]...
> 549) Hmm ... not sure why the end is so sharp. It is obviously
> designed for a wrench to grip the square at the top to tighten
> it. I suspect that the two square eyes on the casting link to
> arms which apply leverage to clamp something as the screw is
> advanced -- but what is being held is not clear. I guess that
> I will have to wait for someone who has seen one in service to
> identify it.
According to R.H. <[email protected]>:
> This week's photos have just been posted:
>
> http://puzzlephotos.blogspot.com/
O.K. Posting from rec.crafts.metalworking again, and hoping
that it gets properly posted this time, unlike the previous two tries.
545) Pedometer -- counts steps and displays them in units of
miles based on stride length.
546) To hold fireplace materials, perhaps?
547) Speaker from a drive-in theatre. Volume control knob is
long gone -- perhaps broken off the shaft.
The hook on the back keeps it in the window of the car.
548) Nozzle of a fireplace bellows. A rather nice looking one,
at that.
549) Hmm ... not sure why the end is so sharp. It is obviously
designed for a wrench to grip the square at the top to tighten
it. I suspect that the two square eyes on the casting link to
arms which apply leverage to clamp something as the screw is
advanced -- but what is being held is not clear. I guess that
I will have to wait for someone who has seen one in service to
identify it.
550) Perhaps for perforating the soil around a potted plant? That
seems within the capabilities of the spring as described.
Now to see what others have guessed -- after making sure that
the article really gets posted. :-)
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
"humunculus" <[email protected]> wrote in message
news:[email protected]...
> Try this. Its not the same, but very similar:
> http://tinyurl.com/d8feh
>
> I think its pretty clear that its an ice chopper, to crush ice in a
> glass without busting the glass up.
>
> --humunculus
Thanks, that's a good link, I agree that ice chopper is the probable answer.
Rob
We have a place in Maine that has nothing but fireplace heat. We have a
bellows that has been in constant use for near 100 years (the place has been
in the family since my grandparents). It has a brass nozzle (but doesn't
look like a hose nozzle) and the leather is secured to the wood with
furniture tacks like this one.
"humunculus" <[email protected]> wrote in message
news:[email protected]...
> Wow, I think somebody got scammed. Those are furniture tacks being used
> to hold on the naugahyde, and the tip is definately from a hose
> fitting: see <http://tinyurl.com/dh73r>.
>
> The bellows is similar to this one
> <http://www.chipcarving.com/bellows.htm> but not as well made. I don't
> think there's any way that the original is an antique.
>
> --humunculus
>
In article <[email protected]>,
"R.H." <[email protected]> wrote:
>This week's photos have just been posted:
>
>http://puzzlephotos.blogspot.com/
>
>
>
>Rob
545. Counts how many pedestrians you run over.
546. Hint: John Holmes.
547. Robot rat.
548. Device to inflate cartoon characters and make them float away.
549. Superseded by Heimlich Maneuver.
550. Device to tickle people through their calluses.
539. Dork beer mug.
540. Hole storage box.
541. Air flattener.
542. Japanese traffic signs.
543. Aquaman's sex toy.
544. Failed prototype salad spinner.
Posted from rcm in leu of going to work.
--
B.B. --I am not a goat! thegoat4 at airmail dot net
"R.H." <[email protected]> wrote in message
news:[email protected]...
> This week's photos have just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
>
> Rob
>
>
546 - Don't know for sure since it isn't banged up but it looks like the
piece of furniture my farrier uses. Put the horse's hoof on the top to
steady it for filing and trimming up and the small steel plate below is for
pounding the shoe narrower until it fits.
547 - There's a memory jogger. Speaker from a drive-in.
Steve.
In article <pMhtf.80$Z74.60@trndny06>,
"Alexander Thesoso" <[email protected]> wrote:
> 550 I'm surprised nobody got this yet.
>
> It is an Ice Crusher / Ice-Pick. You put a few ice cubes in a 1-pint pyrex
> measuring cup and smash them into crushed ice. The impact when the handle
> slams down to its limit breaks the ice.
>
> It works, but has a flaw... Tends to chip off ground glass from the bottom
> of the cup.
>
>
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
> > This week's photos have just been posted:
> >
> > http://puzzlephotos.blogspot.com/
> >
> >
> >
> > Rob
> >
My grandmother, who still had an icebox with great blocks of ice
delivered twice a week, used something very like this to chip off ice
for cold drinks and the like.
I don't recall whether it slid up into the handle in the way you
describe, but it has been over 60 years since I last saw it.
Quite good, all things considered. Rather cracked looking but it doesn't
leak. I do remember my uncle oiling it though.
"Rich Grise" <[email protected]> wrote in message
news:[email protected]...
> On Sun, 01 Jan 2006 15:21:04 +0000, CW top-posted:
>
> > We have a place in Maine that has nothing but fireplace heat. We have a
> > bellows that has been in constant use for near 100 years (the place has
been
> > in the family since my grandparents). It has a brass nozzle (but doesn't
> > look like a hose nozzle) and the leather is secured to the wood with
> > furniture tacks like this one.
>
> So, after 100 years, what kind of shape is the leather in?
>
> Thanks,
> Rich
>
>
> > "humunculus" <[email protected]> wrote in message
> > news:[email protected]...
> >> Wow, I think somebody got scammed. Those are furniture tacks being used
> >> to hold on the naugahyde, and the tip is definately from a hose
> >> fitting: see <http://tinyurl.com/dh73r>.
> >>
> >> The bellows is similar to this one
> >> <http://www.chipcarving.com/bellows.htm> but not as well made. I don't
> >> think there's any way that the original is an antique.
> >>
> >> --humunculus
> >>
>
"DoN. Nichols" <[email protected]> wrote in message
news:[email protected]...
> I might have come up with a better guess if it had been clear
> that the sharp end was threaded.
Damn, DoN. I would suggest getting the eyes checked, but it's clear that the
problem is the rest of your cranium. Smack it once or twice with a 2x and
see if you can force a reset. Right between the eyes might do the trick.
Lemme know if you want some help.
546 - Michael Jackson's barstool.
B.
"R.H." <[email protected]> wrote in message
news:[email protected]...
> This week's photos have just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
>
> Rob
>
>
"R.H." <[email protected]> wrote in news:WJNsf.91395$lh.53041
@tornado.ohiordc.rr.com:
> This week's photos have just been posted:
>
> http://puzzlephotos.blogspot.com/
545 - I think it's called a Pedometer. It measures how far you've walked.
546 - Telephone stand.
547 - Drive-in movie speaker.
548 - A bellows.
549 - Looks familiar but can't place it. Something to do with concrete
forms?
550 - No clue.
--
Dan
Five of the six have been correctly answered, not sure about the last one:
545. Pedometer
546. Telephone stand
547. Drive-in movie speaker
548. Fireplace bellows
549. Woodcarver's screw
550. Haven't been able to verify any of the guesses.
A few new photos and links have been posted on the answer page:
http://pzphotosan97.blogspot.com/
Rob
According to Unknown <[email protected]>:
> On Thu, 29 Dec 2005 20:47:32 +0000, [email protected] (DoN.
> Nichols) wrote:
>
> >,;According to R.H. <[email protected]>:
> >,;> This week's photos have just been posted:
> >,;>
> >,;> http://puzzlephotos.blogspot.com/
> >,;
> >,; O.K. Posting from rec.crafts.metalworking again, and hoping
> >,;that it gets properly posted this time, unlike the previous two tries.
> >,;
> >,;545) Pedometer -- counts steps and displays them in units of
> >,; miles based on stride length.
>
> For a little more detail...Yes it is a pedometer but it was one of
> those gimmicks the old radio shows used to entice listeners. In this
> case Jack Armstrong (the All-American Boy) was a long running radio
> serial before the days of TV. He sold Wheaties well at least the
> sponsor was Wheaties.
O.K.
> Other programs of the time had their magic decoding rings, badges,
> etc.. E.g. the Orphan Annie show had a decoding badge and at the end
> of each program those who had bought their Ovaltine and sent in the
> seal could decode a secret message with the badge key that gave a clue
> about the next program.
Yes -- there were those (with the "secret message" often pushing
the sponsor's product.
Also -- the "Sky King" radio show had a "television ring" (or
was it a bracelet) which had a magnifier in it, and it came with some
cut-to-size pieces of proof paper, which could be used with sunlight to
contact-print negatives. I used some negatives of my own in addition to
the ones which came with the product.
> I had one of those pedometers as a youngster but suspect it was thrown
> out long ago.
I never had one -- but I recognized it at least.
> You guys are all too young.
I don't know -- I would rather like to be some twenty or forty
years younger than I am at present. :-)
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On Thu, 29 Dec 2005 20:47:32 +0000, [email protected] (DoN.
Nichols) wrote:
>,;According to R.H. <[email protected]>:
>,;> This week's photos have just been posted:
>,;>
>,;> http://puzzlephotos.blogspot.com/
>,;
>,; O.K. Posting from rec.crafts.metalworking again, and hoping
>,;that it gets properly posted this time, unlike the previous two tries.
>,;
>,;545) Pedometer -- counts steps and displays them in units of
>,; miles based on stride length.
For a little more detail...Yes it is a pedometer but it was one of
those gimmicks the old radio shows used to entice listeners. In this
case Jack Armstrong (the All-American Boy) was a long running radio
serial before the days of TV. He sold Wheaties well at least the
sponsor was Wheaties.
Other programs of the time had their magic decoding rings, badges,
etc.. E.g. the Orphan Annie show had a decoding badge and at the end
of each program those who had bought their Ovaltine and sent in the
seal could decode a secret message with the badge key that gave a clue
about the next program.
I had one of those pedometers as a youngster but suspect it was thrown
out long ago.
You guys are all too young.
On Fri, 30 Dec 2005 21:54:37 GMT, "R.H." <[email protected]> wrote:
>A few minutes ago I found a similar tool here:
>
>http://pages.neeleysantiques.us/cgi-bin/google.fcgi?itemKey=53724&store=%2Fstores%2Fneeley&catId=kitchen&itemNo=k-116
Note that they put a question mark after the description, so they are
also just guessing. There is still no definite answer. The ice-pick
doesn't wash. It would be a possibility if there was no spring ...but
there is.
"Buddy Matlosz" <[email protected]> wrote in message
news:[email protected]...
> 546 - Michael Jackson's barstool.
Missing its corkscrew.
500 Is an Ice crusher. I purchased mine somewhere around 40-45 years ago.
It fills the niche of making enough crushed ice for one drink (at a time).
It works fairly easily, with the impact when the handle bottoms-out doing
the cracking.
The spring gives a more positive and rapid return than relying on gravity.
The multiple points result in a fast action. The are hard steel.
As I said earlier, I stopped using mine when I realized that, along with the
ice, I was drinking small chips of ground-glass chipped off of the bottom of
the container.
I now use a hand-squeeze cast-aluminum single-cube ice crusher. I keep it
in the freezer, so it doesn't melt too much ice when I use it.
"Guess who" <[email protected]> wrote in message
news:[email protected]...
> On 31 Dec 2005 02:56:58 -0800, "humunculus" <[email protected]>
> wrote:
>
>>Then there's this one:
>>http://tinyurl.com/b5xtm
>
> Well, that seems to be the general concensus. I'd still like to know
> how much ice it would chop with the spring absorbing much of the
> energy. Also, why 5 points, and not just one. If I wanted that sort
> of ice, I'd use an ice crusher, also available at the time.
>
On Thu, 29 Dec 2005 09:10:14 GMT, "R.H." <[email protected]> wrote:
>This week's photos have just been posted:
>
>http://puzzlephotos.blogspot.com/
>
>
>
>Rob
>
548 Bellows that have been repaired by replacing the original nozzle with a
garden hose nozzle.
550 I'm surprised nobody got this yet.
It is an Ice Crusher / Ice-Pick. You put a few ice cubes in a 1-pint pyrex
measuring cup and smash them into crushed ice. The impact when the handle
slams down to its limit breaks the ice.
It works, but has a flaw... Tends to chip off ground glass from the bottom
of the cup.
"R.H." <[email protected]> wrote in message
news:[email protected]...
> This week's photos have just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
>
> Rob
>
>
On Sun, 01 Jan 2006 15:21:04 +0000, CW top-posted:
> We have a place in Maine that has nothing but fireplace heat. We have a
> bellows that has been in constant use for near 100 years (the place has been
> in the family since my grandparents). It has a brass nozzle (but doesn't
> look like a hose nozzle) and the leather is secured to the wood with
> furniture tacks like this one.
So, after 100 years, what kind of shape is the leather in?
Thanks,
Rich
> "humunculus" <[email protected]> wrote in message
> news:[email protected]...
>> Wow, I think somebody got scammed. Those are furniture tacks being used
>> to hold on the naugahyde, and the tip is definately from a hose
>> fitting: see <http://tinyurl.com/dh73r>.
>>
>> The bellows is similar to this one
>> <http://www.chipcarving.com/bellows.htm> but not as well made. I don't
>> think there's any way that the original is an antique.
>>
>> --humunculus
>>
On 31 Dec 2005 02:56:58 -0800, "humunculus" <[email protected]>
wrote:
>Then there's this one:
>http://tinyurl.com/b5xtm
Well, that seems to be the general concensus. I'd still like to know
how much ice it would chop with the spring absorbing much of the
energy. Also, why 5 points, and not just one. If I wanted that sort
of ice, I'd use an ice crusher, also available at the time.
> > 548) Nozzle of a fireplace bellows. A rather nice looking one,
> > at that.
>
> looks a lot like the new ones sold at Wal~Mart, made out of cheap wood,
> fake leather and a hose nozzle.
You're right about it being new, but I'm not sure if it's from Wal-Mart.
This one was priced $65 at the antique mall and was sold yesterday for that
amount minus 10%, so if it is a cheap one, somebody made a nice profit.
Rob
"Alexander Thesoso" <[email protected]> wrote in message
news:pMhtf.80$Z74.60@trndny06...
> 550 I'm surprised nobody got this yet.
>
> It is an Ice Crusher / Ice-Pick. You put a few ice cubes in a 1-pint
pyrex
> measuring cup and smash them into crushed ice. The impact when the handle
> slams down to its limit breaks the ice.
>
> It works, but has a flaw... Tends to chip off ground glass from the bottom
> of the cup.
I think this is the most likely answer, I thought that it was an ice chipper
when I first saw it but still don't see what the value of the spring is,
seems as though it would work just as well without it.
A few minutes ago I found a similar tool here:
http://pages.neeleysantiques.us/cgi-bin/google.fcgi?itemKey=53724&store=%2Fstores%2Fneeley&catId=kitchen&itemNo=k-116
Rob
http://www.buynsellit.com/displayitem.cgi?item=8030665
"Jon Danniken" <[email protected]> a écrit dans le message de
news: [email protected]...
> "R.H." wrote:
>> This week's photos have just been posted:
>>
>> http://puzzlephotos.blogspot.com/
>
> 545 - Pedometer
> 546 - ?
> 547 - Microphone
> 548 - Bellows
> 549 - ?
> 550 - ?
>
> Jon