Rob V wrote:
>
> Anyone have some good cheap sources for this stuff?
>
> Im looking for a peice about 36" long x 4" wide about 3/4" or more
> thickness.
>
I don't think there are cheap sources (and it's going to get "less
cheap" the higher oil goes) unless you can find a fab facility w/ scrap.
Rockler and Woodworkers Supply I think I've seen it in catalogs...
max wrote:
>
... top posting repaired...
> > Rob V wrote:
> >>
> >> Anyone have some good cheap sources for this stuff?
> >>
> >> Im looking for a peice about 36" long x 4" wide about 3/4" or more
> >> thickness.
> >>
> >
> > I don't think there are cheap sources (and it's going to get "less
> > cheap" the higher oil goes) unless you can find a fab facility w/ scrap.
> >
> > Rockler and Woodworkers Supply I think I've seen it in catalogs...
> Machine tooling suppliers such as Enco, McMaster Carr and KBC sell it for
> less than the woodworking stores.
> max
>
Yeah, you know how it goes...I thought of that just <after> "RETURN"...
:)
On Wed, 14 Sep 2005 13:14:19 GMT, "Rob V" <[email protected]> wrote:
>Anyone have some good cheap sources for this stuff?
>
>Im looking for a peice about 36" long x 4" wide about 3/4" or more
>thickness.
>
>Thanks,
>Rob
>
>You can reply to me at
>r_b_v at v_e_r_z_e_r_a doht c_o_m
>(remove the _ to get the address)
>
Look for the plastics distributors such as Cadillac, Regal etc if
there is one in your town. Ask if they have any drops close to what
you need - much cheaper than having one cut. Good luck.
Machine tooling suppliers such as Enco, McMaster Carr and KBC sell it for
less than the woodworking stores.
max
> Rob V wrote:
>>
>> Anyone have some good cheap sources for this stuff?
>>
>> Im looking for a peice about 36" long x 4" wide about 3/4" or more
>> thickness.
>>
>
> I don't think there are cheap sources (and it's going to get "less
> cheap" the higher oil goes) unless you can find a fab facility w/ scrap.
>
> Rockler and Woodworkers Supply I think I've seen it in catalogs...
"Rob V" <[email protected]> wrote in message
news:[email protected]...
> Anyone have some good cheap sources for this stuff?
>
> Im looking for a peice about 36" long x 4" wide about 3/4" or more
> thickness.
>
> Thanks,
> Rob
>
> You can reply to me at
> r_b_v at v_e_r_z_e_r_a doht c_o_m
> (remove the _ to get the address)
>
>
I've a pile of skeletons of 48" x 96" x 1" black HDPE that you can come and
haul off (as much as you want). Mostly irregular shapes, but may have enough
for what you want.
I'm near Winston-Salem, NC.
Regards,
Rick
LeeValley used to carry some http://www.leevalley.com
Bob S.
"Rob V" <[email protected]> wrote in message
news:[email protected]...
> Anyone have some good cheap sources for this stuff?
>
> Im looking for a peice about 36" long x 4" wide about 3/4" or more
> thickness.
>
> Thanks,
> Rob
>
> You can reply to me at
> r_b_v at v_e_r_z_e_r_a doht c_o_m
> (remove the _ to get the address)
>