I was out yachting in my Nutshell pram this afternoon, when there was a
loud crunching noise followed by a loss of steering. Yup, snapped the
rudder clean in half.
Can anyone recommend a New England supplier of marine plywood, preferably
one that will sell fractional sheets? Googling has not been productive so
far.
Thanks,
Scott
>>Can anyone recommend a New England supplier of marine plywood,
>>preferably one that will sell fractional sheets? Googling has not
>>been productive so far.
> Scott- Check this out. My guess is that if they cannot help you they
> can direct you to who can.
>
> http://www.buckwoodcraft.com/marine_plywood.htm
Thanks, Joe - I'll be making some calls in the morning.
Scott
"Glenn Ashmore" <[email protected]> wrote in news:IZEDg.9803$ok5.9316
@dukeread01:
> Try Boulter http://www.boulterplywood.com/ and Noah's
> http://www.noahsmarine.com/ .
>
Great - thanks for the leads. I'll check them out tomorrow.
Scott
Joe Bemier wrote:
> On Sun, 13 Aug 2006 08:32:44 -0400, "Glenn Ashmore" <[email protected]>
> wrote:
>
> > Try Boulter http://www.boulterplywood.com/ and Noah's
> > http://www.noahsmarine.com/ .
>
> Very interesting, Glenn. How did you obtain the knowledge required to
> build such a substantial craft?
You might also check with an outdoor sign company. You might be able to
get some HDO (High Density Overlay) slightly better than marine plywood.
--
Try Boulter http://www.boulterplywood.com/ and Noah's
http://www.noahsmarine.com/ .
--
Glenn Ashmore
I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com
"Scott Cramer" <[email protected]> wrote in message
news:[email protected]...
>I was out yachting in my Nutshell pram this afternoon, when there was a
> loud crunching noise followed by a loss of steering. Yup, snapped the
> rudder clean in half.
>
> Can anyone recommend a New England supplier of marine plywood, preferably
> one that will sell fractional sheets? Googling has not been productive so
> far.
>
> Thanks,
>
> Scott
On 13 Aug 2006 00:36:29 GMT, Scott Cramer <[email protected]> wrote:
>I was out yachting in my Nutshell pram this afternoon, when there was a
>loud crunching noise followed by a loss of steering. Yup, snapped the
>rudder clean in half.
>
>Can anyone recommend a New England supplier of marine plywood, preferably
>one that will sell fractional sheets? Googling has not been productive so
>far.
>
>Thanks,
>
>Scott
Scott- Check this out. My guess is that if they cannot help you they
can direct you to who can.
http://www.buckwoodcraft.com/marine_plywood.htm
On Sun, 13 Aug 2006 08:32:44 -0400, "Glenn Ashmore" <[email protected]>
wrote:
>Try Boulter http://www.boulterplywood.com/ and Noah's
>http://www.noahsmarine.com/ .
Very interesting, Glenn. How did you obtain the knowledge required to
build such a substantial craft?