Youre outfitting a shop. Which tool do you buy first?
That questions been asked in the Wreck so many times, and answered,
that I dont even want to think about the frequency. Each time it gets
answers that range from wait till you find what you really need to
more specific suggestions like a table saw or bandsaw.
Ive been working along on a shoestring with crappy tools and a POS
shop for a few years now, with dreams of sugarplums and monster tools
(both handheld and powered) all along the way.
Some day, I keep telling myself
.
Well some day just happened. I came into a sizable piece of money that
can be partially devoted to upgrading my tools.
Back to the question. Which should come first? Tools that come to the
top of the list include: Table saw, Bandsaw, Drill Press, Better Router,
Jointer, along with a truckload of stuff from Lee Valley.
Tough choices. Requires many days and nights of deep contemplation. Need
to maximize the efficiency so itll fit into a small shop. After a long
period of agonizing, I came up with the best choice I could possibly
think up as the FIRST tool.
Here it is: http://tinyurl.com/6lakt8
This little baby will run all day long, never bog down and should last
for 25 years. The company has been around for a long time, has a good
reputation and will be able to supply parts for some time. (If thats
even necessary). The online reviews have been excellent. The 5 year
warranty didnt hurt either. Although no mention was made in this house,
I can gloat here that it was on sale for 20% off.
I brought it home (UPS was an option, but I have a pickup truck),
carefully unboxed it and installed it. Checked the manual for setup and
table trueness, shimmed where it needed and wired the shop especially
for it.
And waited.
I waited until it had been through a few sessions of work to ensure that
it was everything the online reviews had said it was. The reviews were
right on the money. She was pleased.
THEN I ordered a new table saw. Bandsaw will be next.
Im not sure what Im gonna do when I get the urge to buy Festool.
--
Tanus
http://www.home.mycybernet.net/~waugh/shop/
On Sun, 7 Sep 2008 00:44:31 +0100, Tanus wrote
(in article <[email protected]>):
> Youre outfitting a shop. Which tool do you buy first?
Seriously? Not a "wife alarm" or leather recliner?
My first / Desert Island power tool would definitely be a sliding mitre saw.
In the real world, sheet stuff for simple projects can be got from Big Boxery
at the local woodyard, cut to size on a huge, accurate, expensive sheet saw.
but cutting sticks accurately to length is the big at-home priority. The
mitre saw can handle and trim small sheet stuff, of course, and flipping
parallel-sided ply, for example, can give pretty good 24" normals.
Beyond that, a good coffee pot and a radio...
yeah, sorry, MITER saw for the lost colonials among us. :-p
Tanus wrote:
> I waited until it had been through a few sessions of work to ensure that
> it was everything the online reviews had said it was. The reviews were
> right on the money. She was pleased.
>
> THEN I ordered a new table saw. Bandsaw will be next.
>
> Im not sure what Im gonna do when I get the urge to buy Festool.
When that moment arrives, might I suggest that the seven-speed "Ultra
Power Plus" handheld version of your original benchtop tool purchase may
produce considerable satisfaction...
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
Tanus wrote:
> Youre outfitting a shop. Which tool do you buy first?
>
> That questions been asked in the Wreck so many times, and answered,
> that I dont even want to think about the frequency. Each time it gets
> answers that range from wait till you find what you really need to
> more specific suggestions like a table saw or bandsaw.
>
> Ive been working along on a shoestring with crappy tools and a POS
> shop for a few years now, with dreams of sugarplums and monster tools
> (both handheld and powered) all along the way.
>
> Some day, I keep telling myself
.
>
> Well some day just happened. I came into a sizable piece of money that
> can be partially devoted to upgrading my tools.
>
> Back to the question. Which should come first? Tools that come to the
> top of the list include: Table saw, Bandsaw, Drill Press, Better Router,
> Jointer, along with a truckload of stuff from Lee Valley.
>
> Tough choices. Requires many days and nights of deep contemplation. Need
> to maximize the efficiency so itll fit into a small shop. After a long
> period of agonizing, I came up with the best choice I could possibly
> think up as the FIRST tool.
>
> Here it is: http://tinyurl.com/6lakt8
>
> This little baby will run all day long, never bog down and should last
> for 25 years. The company has been around for a long time, has a good
> reputation and will be able to supply parts for some time. (If thats
> even necessary). The online reviews have been excellent. The 5 year
> warranty didnt hurt either. Although no mention was made in this house,
> I can gloat here that it was on sale for 20% off.
>
> I brought it home (UPS was an option, but I have a pickup truck),
> carefully unboxed it and installed it. Checked the manual for setup and
> table trueness, shimmed where it needed and wired the shop especially
> for it.
>
> And waited.
>
> I waited until it had been through a few sessions of work to ensure that
> it was everything the online reviews had said it was. The reviews were
> right on the money. She was pleased.
>
> THEN I ordered a new table saw. Bandsaw will be next.
>
> Im not sure what Im gonna do when I get the urge to buy Festool.
>
Can you say European road trip?
Tanus <[email protected]> writes:
> Back to the question. Which should come first? Tools that come to the
> top of the list include: Table saw, Bandsaw, Drill Press, Better
> Router, Jointer, along with a truckload of stuff from Lee Valley.
One of the first "big tools" I got was a table saw.
It's *extremely useful* to be able to cut 90 degree corners quickly.
In case you don't know it http://tinyurl.com/6lakt8 happens to be a known
spy site.
"Tanus" <[email protected]> wrote in message news:[email protected]...
> Youre outfitting a shop. Which tool do you buy first?
>
> That questions been asked in the Wreck so many times, and answered, that
> I dont even want to think about the frequency. Each time it gets answers
> that range from wait till you find what you really need to more specific
> suggestions like a table saw or bandsaw.
>
> Ive been working along on a shoestring with crappy tools and a POS shop
> for a few years now, with dreams of sugarplums and monster tools (both
> handheld and powered) all along the way.
>
> Some day, I keep telling myself
.
>
> Well some day just happened. I came into a sizable piece of money that can
> be partially devoted to upgrading my tools.
>
> Back to the question. Which should come first? Tools that come to the top
> of the list include: Table saw, Bandsaw, Drill Press, Better Router,
> Jointer, along with a truckload of stuff from Lee Valley.
>
> Tough choices. Requires many days and nights of deep contemplation. Need
> to maximize the efficiency so itll fit into a small shop. After a long
> period of agonizing, I came up with the best choice I could possibly think
> up as the FIRST tool.
>
> Here it is: http://tinyurl.com/6lakt8
>
> This little baby will run all day long, never bog down and should last for
> 25 years. The company has been around for a long time, has a good
> reputation and will be able to supply parts for some time. (If thats even
> necessary). The online reviews have been excellent. The 5 year warranty
> didnt hurt either. Although no mention was made in this house, I can
> gloat here that it was on sale for 20% off.
>
> I brought it home (UPS was an option, but I have a pickup truck),
> carefully unboxed it and installed it. Checked the manual for setup and
> table trueness, shimmed where it needed and wired the shop especially
> for it.
>
> And waited.
>
> I waited until it had been through a few sessions of work to ensure that
> it was everything the online reviews had said it was. The reviews were
> right on the money. She was pleased.
>
> THEN I ordered a new table saw. Bandsaw will be next.
>
> Im not sure what Im gonna do when I get the urge to buy Festool.
>
> --
>
> Tanus
>
> http://www.home.mycybernet.net/~waugh/shop/
On Sep 6, 7:44=A0pm, Tanus <[email protected]> wrote:
> You=92re outfitting a shop. Which tool do you buy first?
>
> That question=92s been asked in the Wreck so many times, and answered,
> that I don=92t even want to think about the frequency. Each time it gets
> answers that range from =93wait till you find what you really need=94 to
> more specific suggestions like a table saw or bandsaw.
>
> I=92ve been working along on a shoestring with crappy tools and =A0a POS
> shop for a few years now, with dreams of sugarplums and monster tools
> (both handheld and powered) all along the way.
>
> =93Some day,=94 I keep telling myself=85.
>
> Well some day just happened. I came into a sizable piece of money that
> can be partially devoted to upgrading my tools.
>
> Back to the question. Which should come first? Tools that come to the
> top of the list include: Table saw, Bandsaw, Drill Press, Better Router,
> Jointer, along with a truckload of stuff from Lee Valley.
>
> Tough choices. Requires many days and nights of deep contemplation. Need
> to maximize the efficiency so it=92ll fit into a small shop. After a long
> period of agonizing, I came up with the best choice I could possibly
> think up as the FIRST tool.
>
> Here it is:http://tinyurl.com/6lakt8
>
> This little baby will run all day long, never bog down and should last
> for 25 years. The company has been around for a long time, has a good
> reputation and will be able to supply parts for some time. (If that=92s
> even necessary). The online reviews have been excellent. The 5 year
> warranty didn=92t hurt either. Although no mention was made in this house=
,
> I can gloat here that it was on sale for 20% off.
>
> I brought it home (UPS was an option, but I have a pickup truck),
> carefully unboxed it and installed it. Checked the manual for setup and
> table trueness, shimmed where it needed and wired the =93shop=94 especial=
ly
> for it.
>
> And waited.
>
> I waited until it had been through a few sessions of work to ensure that
> it was everything the online reviews had said it was. The reviews were
> right on the money. She was pleased.
>
> THEN I ordered a new table saw. Bandsaw will be next.
>
> I=92m not sure what I=92m gonna do when I get the urge to buy Festool.
>
> --
>
> Tanus
>
> http://www.home.mycybernet.net/~waugh/shop/
Larger, insulated shop.
Cabinet saw.
Compressor
Thickness planer
Rotex sander
Dust collector
Drill press
In article <joWwk.778$Wd.617@trnddc01>, [email protected] says...
> Phil Again wrote:
>=20
> >>You?re outfitting a shop. Which tool do you buy first?
> >>
> >=20
> >=20
> > 1st pick a project to build.
> > Figure out what power tools are needed.
> > Figure out what tool accessories are needed.
> > Figure out what finishing / sanding techniques you want.
> > Figure out how you will apply finish coat plus prevent dust mites.
> > Figure out Dust / Cleanup / air quality you want.
> >=20
> > Show spouse project plans,=20
> > show spouse why all those tools needed, and which step(s) each is used =
in=20
> > making project.
> >=20
> > Then buy the best tool your money can stretched to.
> >=20
> > Then pick a second project, and add tools as needed.
> > For your third project, change finishing product and buy finishing tool=
s=20
> > to accommodate.
> >=20
> > (Gosh, This was plan a PLAN! It sounded so-o-o easy on paper. Why didn=
't=20
> > it work? Where did I go WRONG?)
> >=20
>=20
> I think things may have gone wrong at this point:
>=20
> "Show spouse project plans, show spouse why all those tools needed,".
> ^^^^^^^^^^^^^^^
^^^^^^ or perhaps here. ;-)
Actually, since we now have the house, the cabinet saw is soon (as I=20
can get space cleaned in the garage). I have a room over the garage=20
I can use too. It's got loads of headroom, so thought I'd put=20
everything up there except the cabinet saw. It's a little heavy to=20
get up there, though I could cut a hole (and one joist) and put a=20
hoist in. ...I think.
--=20
Keith
> Youâre outfitting a shop. Which tool do you buy first?
>
1st pick a project to build.
Figure out what power tools are needed.
Figure out what tool accessories are needed.
Figure out what finishing / sanding techniques you want.
Figure out how you will apply finish coat plus prevent dust mites.
Figure out Dust / Cleanup / air quality you want.
Show spouse project plans,
show spouse why all those tools needed, and which step(s) each is used in
making project.
Then buy the best tool your money can stretched to.
Then pick a second project, and add tools as needed.
For your third project, change finishing product and buy finishing tools
to accommodate.
(Gosh, This was plan a PLAN! It sounded so-o-o easy on paper. Why didn't
it work? Where did I go WRONG?)
Morris Dovey wrote:
> Tanus wrote:
>
>> I waited until it had been through a few sessions of work to ensure
>> that it was everything the online reviews had said it was. The reviews
>> were right on the money. She was pleased.
>>
>> THEN I ordered a new table saw. Bandsaw will be next.
>>
>> Im not sure what Im gonna do when I get the urge to buy Festool.
>
> When that moment arrives, might I suggest that the seven-speed "Ultra
> Power Plus" handheld version of your original benchtop tool purchase may
> produce considerable satisfaction...
>
Handhelds can be dangerous. She can't very well pick up the benchtop and
chase me round with it. Or throw it at me.
--
Tanus
http://www.home.mycybernet.net/~waugh/shop/
Maxwell Lol wrote:
> Tanus <[email protected]> writes:
>
>> Back to the question. Which should come first? Tools that come to the
>> top of the list include: Table saw, Bandsaw, Drill Press, Better
>> Router, Jointer, along with a truckload of stuff from Lee Valley.
>
> One of the first "big tools" I got was a table saw.
> It's *extremely useful* to be able to cut 90 degree corners quickly.
>
>
The original question was somewhat tongue-in-cheek, but I got great
comments regardless.
One of the most interesting was from Leon, and his waaaaaaaay down the
list for a jointer. I'm assuming that's because you can joint on a
number of other machinery, and a jointer takes up valuable real estate.
I'm going to keep that in mind.
I'd already insulated the shop, but neglected to update the info. on the
site. A shop expansion is also in the works, hence the question on how
to populate it. This year, the winters are going to be a little less
harsh in there, because I've also improved the heating system.
--
Tanus
http://www.home.mycybernet.net/~waugh/shop/
Phil Again wrote:
>>Youâre outfitting a shop. Which tool do you buy first?
>>
>
>
> 1st pick a project to build.
> Figure out what power tools are needed.
> Figure out what tool accessories are needed.
> Figure out what finishing / sanding techniques you want.
> Figure out how you will apply finish coat plus prevent dust mites.
> Figure out Dust / Cleanup / air quality you want.
>
> Show spouse project plans,
> show spouse why all those tools needed, and which step(s) each is used in
> making project.
>
> Then buy the best tool your money can stretched to.
>
> Then pick a second project, and add tools as needed.
> For your third project, change finishing product and buy finishing tools
> to accommodate.
>
> (Gosh, This was plan a PLAN! It sounded so-o-o easy on paper. Why didn't
> it work? Where did I go WRONG?)
>
I think things may have gone wrong at this point:
"Show spouse project plans, show spouse why all those tools needed,".
^^^^^^^^^^^^^^^
--
Jack Novak
Buffalo, NY - USA
[email protected]
"Tanus" <[email protected]> wrote in message news:[email protected]...
> Youre outfitting a shop. Which tool do you buy first?
>
> That questions been asked in the Wreck so many times, and answered, that
> I dont even want to think about the frequency. Each time it gets answers
> that range from wait till you find what you really need to more specific
> suggestions like a table saw or bandsaw.
>
> Ive been working along on a shoestring with crappy tools and a POS shop
> for a few years now, with dreams of sugarplums and monster tools (both
> handheld and powered) all along the way.
>
> Some day, I keep telling myself
.
>
> Well some day just happened. I came into a sizable piece of money that can
> be partially devoted to upgrading my tools.
>
> Back to the question. Which should come first? Tools that come to the top
> of the list include: Table saw, Bandsaw, Drill Press, Better Router,
> Jointer, along with a truckload of stuff from Lee Valley.
>
> Tough choices. Requires many days and nights of deep contemplation. Need
> to maximize the efficiency so itll fit into a small shop. After a long
> period of agonizing, I came up with the best choice I could possibly think
> up as the FIRST tool.
>
> Here it is: http://tinyurl.com/6lakt8
>
> This little baby will run all day long, never bog down and should last for
> 25 years. The company has been around for a long time, has a good
> reputation and will be able to supply parts for some time. (If thats even
> necessary). The online reviews have been excellent. The 5 year warranty
> didnt hurt either. Although no mention was made in this house, I can
> gloat here that it was on sale for 20% off.
>
> I brought it home (UPS was an option, but I have a pickup truck),
> carefully unboxed it and installed it. Checked the manual for setup and
> table trueness, shimmed where it needed and wired the shop especially
> for it.
>
> And waited.
>
> I waited until it had been through a few sessions of work to ensure that
> it was everything the online reviews had said it was. The reviews were
> right on the money. She was pleased.
>
> THEN I ordered a new table saw. Bandsaw will be next.
>
> Im not sure what Im gonna do when I get the urge to buy Festool.
1. Cabinet Saw
2. Thickness Planer
3. Dust Collector
4. Router Table with dedicated router
5. Drill Press
6. Band Saw
7. 12" Disk Sander
8. Oscillating Spindle Sander
9. Drum Sander
10.
11.
12.
13.
14.
15. Jointer
"Tanus" <[email protected]> wrote in message news:[email protected]...
> Youre outfitting a shop. Which tool do you buy first?
>
snip
>
> I waited until it had been through a few sessions of work to ensure that
> it was everything the online reviews had said it was. The reviews were
> right on the money. She was pleased.
>
Your first tool was a Craftman paint mixer?? And the wife liked it?
> THEN I ordered a new table saw. Bandsaw will be next.
>
If I had a chunk of money to spend on a shop, the first thing I would buy
would be a new shop building. Ya know, a structure that is bigger, has lots
of power and is insulated.