Am I correct in thinking that if I wanted to use dowel joints to fasten
a 1 x 3 with the 3 inch face to the edge of 3/4 inch plywood I would
use a jig like the Veritas Dowelling Jig 05J08.01 shown on page 127 of
the Lee valley catalog rather than the self centering dowelling jig
like the 25K64.01 shown on the same page?
"rasberry" <[email protected]> wrote in message
news:171120041922422814%[email protected]...
> Am I correct in thinking that if I wanted to use dowel joints to fasten
> a 1 x 3 with the 3 inch face to the edge of 3/4 inch plywood I would
> use a jig like the Veritas Dowelling Jig 05J08.01 shown on page 127 of
> the Lee valley catalog rather than the self centering dowelling jig
> like the 25K64.01 shown on the same page?
Hi -
You're correct - you need a "non self-centering" jig for that....
Other methods your could use - buy a couple of hardened inserts and make
your own jig ...
Buy "mini biscuits", and cut the 1/8" slots on a router table.
Cheers -
Rob