I have a 15 HP Briggs and stratton engine and the small pump shaft pin is
broken. It is maybe a $2 item but I can't buy it without the whole camshaft.
Does anyone have this little piece from an old engine? I need the small arm
that sits near the cam shaft and has a spring inside the arm . I guess it is
there as a control for the oil ? I do not need the pump shaft itself as that
piece is not broken. Just the little arm piece. the piece in question is
about 3/4 inches long and rotates on the little pump shaft. The pump shaft
fits into a hole on the cam gear very near to the Cam Shaft itself . that is
the shaft with the lopes on it. Can someone please help with this?
The model is 28N707 TYPE 016001 CODE 9408014B please write to me here
I fixed these engines to pay my way through college. Maybe this will help
identify the part you need. Reply back with a part number of the pin or the
component.
http://shop.briggsandstratton.com/BShopProductListingPage.asp?MecID=100&CatalogID=56B2B9A7-283C-11D4-8886-00B0D0203414&SessionID=C106322C-09DB-4760-890E-D9DE1156A60F&SMSID=Smart+Search&ViewName=htsDIY&EngineModelNumber=28N707&EngineType=0160#
Bob
"Teachz666" <[email protected]> wrote in message
news:[email protected]...
> I have a 15 HP Briggs and stratton engine and the small pump shaft pin is
> broken. It is maybe a $2 item but I can't buy it without the whole
camshaft.
> Does anyone have this little piece from an old engine? I need the small
arm
> that sits near the cam shaft and has a spring inside the arm . I guess it
is
> there as a control for the oil ? I do not need the pump shaft itself as
that
> piece is not broken. Just the little arm piece. the piece in question is
> about 3/4 inches long and rotates on the little pump shaft. The pump
shaft
> fits into a hole on the cam gear very near to the Cam Shaft itself . that
is
> the shaft with the lopes on it. Can someone please help with this?
>
> The model is 28N707 TYPE 016001 CODE 9408014B please write to me here
> broken. It is maybe a $2 item but I can't buy it without the whole
camshaft.
> Does anyone have this little piece from an old engine? I need the small
arm
> that sits near the cam shaft and has a spring inside the arm . I guess it
is
> there as a control for the oil ? I do not need the pump shaft itself as
that
> piece is not broken. Just the little arm piece. the piece in question is
> about 3/4 inches long and rotates on the little pump shaft. The pump
shaft
> fits into a hole on the cam gear very near to the Cam Shaft itself . that
is
> the shaft with the lopes on it. Can someone please help with this?
Is it made out of wood?