reverse ogee plunge bit?

DJ Delorie wrote:
> I want route this profile into a flat surface, to make a dished out
> area. The only plunge ogee bits I can find have a step detail halfway
> up. Any ideas?
>
> HHHH####ddoo,__.
> MMMMMMMMMMMMMMMMM#bo.
> MMMMMMMMMMMMMMMMMMMMMHb\
> MMMMMMMMMMMMMMMMMMMMMMMMHb_
> MMMMMMMMMMMMMMMMMMMMMMMMMMMHb.
> MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMH\.
> MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM#\
> MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMb\
> MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM#o_.
> MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMH##oo,__....
> MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
> MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
> MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM


See:

http://www.toolstoday.com/p-5122-plunge-raised-ogee-router-bits-style-b.aspx

--
Jack Novak
Buffalo, NY - USA
[email protected]

"DJ Delorie" <[email protected]> wrote in message
news:[email protected]...
>
> I want route this profile into a flat surface, to make a dished out
> area. The only plunge ogee bits I can find have a step detail halfway
> up. Any ideas?
http://www.leevalley.com/wood/page.aspx?c=1&p=30187&cat=1,46168,62157&ap=2

On 30 Oct 2009 22:59:46 -0400, the infamous DJ Delorie
<[email protected]> scrawled the following:

>
>Larry Jaques <novalidaddress@di\/ersify.com> writes:
>> http://fwd4.me/2Cu cheap import
>> or
>> http://fwd4.me/2Cv Freud
>
>Neither of those can "dish out" a region of the wood - they have
>bearings, so they can only cut along the edge. Also, the import one
>wouldn't have left a continuous curve at the top - there'd be a corner.
>
>The freud one has nearly the right curve though.

I must have missed something in your original post. I thought you
wanted -edge- treatments.

---
Tomorrow is the most important thing in life. Comes into us at midnight
very clean. It's perfect when it arrives and it puts itself in our hands.
It hopes we've learned something from yesterday.
--John Wayne (1907 - 1979)

"Upscale" <[email protected]> wrote in message
> > I want route this profile into a flat surface, to make a dished out
> > area. The only plunge ogee bits I can find have a step detail halfway
> > up. Any ideas?

Wasn't thinking when I posted the link to the bearing bits, but the dish bit
should give you what you're looking for.

On 25 Sep 2009 18:14:54 -0400, the infamous DJ Delorie
<[email protected]> scrawled the following:

>
>Nova <[email protected]> writes:
>> http://www.toolstoday.com/p-5122-plunge-raised-ogee-router-bits-style-b.aspx
>
>That's the one! Thanks!

Are you sure you don't want a raised panel door bit? That's what your
illustration looked like to me. <shrug>

http://fwd4.me/2Cu cheap import
or
http://fwd4.me/2Cv Freud

--
"Giving every man a vote has no more made men wise and free
than Christianity has made them good." --H. L. Mencken
---

"DJ Delorie" <[email protected]> wrote in message
news:[email protected]...
>
> I want route this profile into a flat surface, to make a dished out
> area. The only plunge ogee bits I can find have a step detail halfway
> up. Any ideas?
http://www.leevalley.com/wood/page.aspx?c=1&p=30171&cat=1,46168,46173&ap=1
http://www.leevalley.com/wood/page.aspx?c=1&p=30135&cat=1,46168,46178&ap=1

Nova <[email protected]> writes:
> http://www.toolstoday.com/p-5122-plunge-raised-ogee-router-bits-style-b.aspx

That's the one! Thanks!

Larry Jaques <novalidaddress@di\/ersify.com> writes:
> http://fwd4.me/2Cu cheap import
> or
> http://fwd4.me/2Cv Freud

Neither of those can "dish out" a region of the wood - they have
bearings, so they can only cut along the edge. Also, the import one
wouldn't have left a continuous curve at the top - there'd be a corner.

The freud one has nearly the right curve though.