I need a belt for a Delta Model 20 drill press. It's delta/rockwell
part number 1200266, and Delta has them, but for $55, which seems
expensive to me. I'm pretty sure the belt is a 2L profile, and the
existing one has about a 58" outside circumference.
I usually buy stuff like this from McMaster-Carr, but the longest they
have in a 2L profile is 38". I tried a 3L-58 ($6), but it definitely
has a wider profile than the original belt. Anyone know of a source for
a 58" o.c. 2L profile belt?
Thanks,
Heath
"[email protected]" wrote:
>
> I need a belt for a Delta Model 20 drill press. It's delta/rockwell
> part number 1200266, and Delta has them, but for $55, which seems
> expensive to me. I'm pretty sure the belt is a 2L profile, and the
> existing one has about a 58" outside circumference.
>
> I usually buy stuff like this from McMaster-Carr, but the longest they
> have in a 2L profile is 38". I tried a 3L-58 ($6), but it definitely
> has a wider profile than the original belt. Anyone know of a source for
> a 58" o.c. 2L profile belt?
>
Delta, perhaps??? :)
Don't know specifically, can your local NAPA get such an animal?
"[email protected]" wrote:
>
> Okay. Anyone know of a source OTHER THAN DELTA for a 58" o.c. 2L
> profile belt?
>
> :-)
>
> I haven't called NAPA, but I can't imagine either a 2L or 58" belt
> having an automotive application.
>
They supply parts for a lot of stuff and have general belt catalog as
well...don't know they'll have what you need, but I think its worth a
shot.
"[email protected]" wrote:
>
> Grainger doesn't seem to have any 2L profile belts listed in their
> online (#396) catalog.
Try to find a Gates distributorship...
Grainger
<[email protected]> wrote in message
news:[email protected]...
> I need a belt for a Delta Model 20 drill press. It's delta/rockwell
> part number 1200266, and Delta has them, but for $55, which seems
> expensive to me. I'm pretty sure the belt is a 2L profile, and the
> existing one has about a 58" outside circumference.
>
> I usually buy stuff like this from McMaster-Carr, but the longest they
> have in a 2L profile is 38". I tried a 3L-58 ($6), but it definitely
> has a wider profile than the original belt. Anyone know of a source for
> a 58" o.c. 2L profile belt?
>
> Thanks,
> Heath
>
>> I need a belt for a Delta Model 20 drill press. It's delta/rockwell
>> part number 1200266, and Delta has them, but for $55, which seems
>> expensive to me. I'm pretty sure the belt is a 2L profile, and the
>> existing one has about a 58" outside circumference.
>>
>> I usually buy stuff like this from McMaster-Carr, but the longest they
>> have in a 2L profile is 38". I tried a 3L-58 ($6), but it definitely
>> has a wider profile than the original belt. Anyone know of a source for
>> a 58" o.c. 2L profile belt?
>>
>
> Delta, perhaps??? :)
Look above and re-read the second line... He knows Delta has 'em already...
Not a bad tip otherwise. <grin>
> Don't know specifically, can your local NAPA get such an animal?
Maybe... Can you read the exact size off the belt?
--
Regards,
Joe Agro, Jr.
(800) 871-5022
(908) 542-0244
http://www.AutoDrill.com
http://www.Multi-Drill.com
V8013-R
Would a link belt work? I do not know what 2L and 3L specifically are so I
hope its not a dumb suggestion.
<[email protected]> wrote in message
news:[email protected]...
>I need a belt for a Delta Model 20 drill press. It's delta/rockwell
> part number 1200266, and Delta has them, but for $55, which seems
> expensive to me. I'm pretty sure the belt is a 2L profile, and the
> existing one has about a 58" outside circumference.
>
> I usually buy stuff like this from McMaster-Carr, but the longest they
> have in a 2L profile is 38". I tried a 3L-58 ($6), but it definitely
> has a wider profile than the original belt. Anyone know of a source for
> a 58" o.c. 2L profile belt?
>
> Thanks,
> Heath
>
I'd go with a link type belt, Powertwist is one of the better brands =
IMHO. Any of them
will likely work better than a standard belt, or at least that has been =
my experience.
Grainger, Harbor Freight and McMaster carry them (or used to), once in a =
while you can
find a box for sale on ebay too. I believe the grainger catalog online =
has a cross
reference for sizing as well. Good luck. Joe
On 17 Aug 2005 12:52:04 -0700, "[email protected]" =
<[email protected]> wrote:
>I need a belt for a Delta Model 20 drill press. It's delta/rockwell
>part number 1200266, and Delta has them, but for $55, which seems
>expensive to me. I'm pretty sure the belt is a 2L profile, and the
>existing one has about a 58" outside circumference.
>
>I usually buy stuff like this from McMaster-Carr, but the longest they
>have in a 2L profile is 38". I tried a 3L-58 ($6), but it definitely
>has a wider profile than the original belt. Anyone know of a source for
>a 58" o.c. 2L profile belt?
>
>Thanks,
>Heath
[email protected] wrote:
> Okay. Anyone know of a source OTHER THAN DELTA for a 58" o.c. 2L
> profile belt?
>
> :-)
>
> I haven't called NAPA, but I can't imagine either a 2L or 58" belt
> having an automotive application.
>
> Thanks,
> Heath
>
A "Google" search for "v-belt 2L" turns up a number of possibilities.
--
Jack Novak
Buffalo, NY - USA
[email protected]
(Remove -SPAM- to send email)