Hello Group,
I have access to several large oaks and some of the limbs are large,
about 12 (or more)inches in diameter. The trunks are rotted out so
they will be used as firewood. Anyway, my question relates to the
limbs; Is there any difference in using limb wood for projects such as
railings, table legs, posts, etc.?
I would think that it there will be no difference compared to using a
12 inch trunk. Any comments?
Thanks in advance,
Marc
"marc rosen" <[email protected]> wrote in message
news:[email protected]...
> Hello Group,
> I have access to several large oaks and some of the limbs are large,
> about 12 (or more)inches in diameter. The trunks are rotted out so
> they will be used as firewood. Anyway, my question relates to the
> limbs; Is there any difference in using limb wood for projects such as
> railings, table legs, posts, etc.?
> I would think that it there will be no difference compared to using a
> 12 inch trunk. Any comments?
> Thanks in advance,
> Marc
>
You lose. Take a look at the position of the heart in a limb, notice how
the rings are tight on one side, loose on the other. Two entirely different
kinds of wood in working properties.
http://www.fpl.fs.fed.us/documnts/fplgtr/fplgtr113/fplgtr113.htm
Has some really good stuff about the nature of wood that can help you.
On 30 Jan 2005 18:10:29 -0800, "marc rosen" <[email protected]> wrote:
>Thanks guys,
>I think I'll make all of the trees firewood and try for some straight
>sections of trunks when i get more trees. I never gave the
>compression/tension relationship any thought.
>Thanks again,
> Marc
Marc... unless you have a lathe, just send those pesky branches to
me.. *g*
mac
Please remove splinters before emailing
I'm thinking there will be a lot of stress built in...causes bowing when
sawn.
Wilson
"marc rosen" <[email protected]> wrote in message
news:[email protected]...
> Hello Group,
> I have access to several large oaks and some of the limbs are large,
> about 12 (or more)inches in diameter. The trunks are rotted out so
> they will be used as firewood. Anyway, my question relates to the
> limbs; Is there any difference in using limb wood for projects such as
> railings, table legs, posts, etc.?
> I would think that it there will be no difference compared to using a
> 12 inch trunk. Any comments?
> Thanks in advance,
> Marc
>
On a limb, the underside will be in compression and the top-side will be in
tension. When you mill - you will be releasing those forces and most likely
will bow. If you have a lathe, cut some and use it for turnings.
Bob S.
"marc rosen" <[email protected]> wrote in message
news:[email protected]...
> Hello Group,
> I have access to several large oaks and some of the limbs are large,
> about 12 (or more)inches in diameter. The trunks are rotted out so
> they will be used as firewood. Anyway, my question relates to the
> limbs; Is there any difference in using limb wood for projects such as
> railings, table legs, posts, etc.?
> I would think that it there will be no difference compared to using a
> 12 inch trunk. Any comments?
> Thanks in advance,
> Marc
>