I had 4 small kitchen doors that were butt jointed together to make one
larger one with biscuits about every 6" on center. I had the wrong clamps,
also away from my shop, so glue was set without it. Glue line is about
1/16". Any experience if the butt joints with biscuits would fail faster
without the aid of clamps? Pocket screws look pretty good right now.
>
> On Sun, 18 Sep 2005 04:41:52 -0700, "Fred" <[email protected]> wrote:
>
> >I had 4 small kitchen doors that were butt jointed together to make one
> >larger one with biscuits about every 6" on center. I had the wrong clamps,
> >also away from my shop, so glue was set without it. Glue line is about
> >1/16". Any experience if the butt joints with biscuits would fail faster
> >without the aid of clamps? Pocket screws look pretty good right now.
> >
Then
[email protected] top-posted so I cut and pasted it here:
> Yep, the biscuit is unsupported in the gap, and thus much weaker
>
Maybe you should saw the panels apart, rejoint them at the
glue joint and try again. A rope turniquette can be used
for a clamp. Aside from the fact that what you have now
will soon break apart on its own, doesn't it look like crap?
--
FF
[email protected] wrote:
> Yep, the biscuit is unsupported in the gap, and thus much weaker
Unsupported biccies are still fairly strong, if their grain runs the
right way. I've made slatted crudeware (ventilated storage bins) by
putting #20 biscuits into #0 slots before now.
OTOH, it must look terrible. I'd re-saw, re-joint and re-assemble.
Find pictures of a "Plano" glue-up clamp, then make yoru own workshop
copy of it. Mine is aluminium window extrusions (from a scrapyard) and
G clamps.
Yep, the biscuit is unsupported in the gap, and thus much weaker
John
On Sun, 18 Sep 2005 04:41:52 -0700, "Fred" <[email protected]> wrote:
>I had 4 small kitchen doors that were butt jointed together to make one
>larger one with biscuits about every 6" on center. I had the wrong clamps,
>also away from my shop, so glue was set without it. Glue line is about
>1/16". Any experience if the butt joints with biscuits would fail faster
>without the aid of clamps? Pocket screws look pretty good right now.
>
<[email protected]> wrote in message
news:[email protected]...
>
>>
>> On Sun, 18 Sep 2005 04:41:52 -0700, "Fred" <[email protected]> wrote:
>>
>> >I had 4 small kitchen doors that were butt jointed together to make one
>> >larger one with biscuits about every 6" on center. I had the wrong
>> >clamps,
>> >also away from my shop, so glue was set without it. Glue line is about
>> >1/16". Any experience if the butt joints with biscuits would fail faster
>> >without the aid of clamps? Pocket screws look pretty good right now.
>> >
>
> Then
> [email protected] top-posted so I cut and pasted it here:
>> Yep, the biscuit is unsupported in the gap, and thus much weaker
>>
>
> Maybe you should saw the panels apart, rejoint them at the
> glue joint and try again. A rope turniquette can be used
> for a clamp. Aside from the fact that what you have now
> will soon break apart on its own, doesn't it look like crap?
>
> --
>
> FF
>
Its been a few days and still holding up ok even when I try to flex it back
and forth - must be from biscuit reinforcement. Pullout force must be a few
hundred pounds as is bending force along the glue line is what I worry about
even assembled with clamps. Actually doesn't look like crap with a little
help from Bondo, sandpaper and paint.
"Fred" <[email protected]> wrote in message
news:[email protected]...
> I had 4 small kitchen doors that were butt jointed together to make one
> larger one with biscuits about every 6" on center. I had the wrong clamps,
> also away from my shop, so glue was set without it. Glue line is about
> 1/16". Any experience if the butt joints with biscuits would fail faster
> without the aid of clamps? Pocket screws look pretty good right now.
What do you mean "Glue line about 1/16"? Do you mean there was 1/16"
gap???? Don't even count on the joint holding if that's the case.
Bob