Folks,
I have come across an older model Delta 3-wheel band saw with a
16-inch throat. The motor is fine and i think the blades are 96" --
but it is missing a belt to drive the wheels from the motor. Anyone
have an idea what size belt i need for this saw? I have been to the
delta site but it appears mum on the subject.
Thanks for any help.
Steve Snow
[email protected]
Stephen Snow wrote:
> Folks,
>
> I have come across an older model Delta 3-wheel band saw with a
> 16-inch throat. The motor is fine and i think the blades are 96" --
> but it is missing a belt to drive the wheels from the motor. Anyone
> have an idea what size belt i need for this saw? I have been to the
> delta site but it appears mum on the subject.
>
> Thanks for any help.
>
> Steve Snow
> [email protected]
Wrap a piece of string around the pulleys and then measure the string.
--
Jack Novak
Buffalo, NY - USA
(Remove "SPAM" from email address to reply)
Link belt my choice, else, wrap a cord around the path and measure what you
used..
"John Carlson" <[email protected]> wrote in message
news:[email protected]...
> I don't have an answer for you, but two suggestions: the first is to
> call Delta Customer Service and ask. They can probably help you. The
> second is to measure roughly and then order some link belt and make
> your own belt to the proper size.
> >
> >I have come across an older model Delta 3-wheel band saw with a
> >16-inch throat. The motor is fine and i think the blades are 96" --
> >but it is missing a belt to drive the wheels from the motor. Anyone
> >have an idea what size belt i need for this saw? I have been to the
> >delta site but it appears mum on the subject.
> >
> >Thanks for any help.
I don't have an answer for you, but two suggestions: the first is to
call Delta Customer Service and ask. They can probably help you. The
second is to measure roughly and then order some link belt and make
your own belt to the proper size.
On 16 Jul 2004 16:21:11 -0700, [email protected] (Stephen Snow)
wrote:
>Folks,
>
>I have come across an older model Delta 3-wheel band saw with a
>16-inch throat. The motor is fine and i think the blades are 96" --
>but it is missing a belt to drive the wheels from the motor. Anyone
>have an idea what size belt i need for this saw? I have been to the
>delta site but it appears mum on the subject.
>
>Thanks for any help.
>
>Steve Snow
>[email protected]
-- jc
Published e-mail address is strictly for spam collection.
If e-mailing me, please use jc631 at optonline dot net