Picked up about 6-7,000 square feet of veneer yesterday with another guy
from my woodworking club. About 5,000 sq. ft. of it is flat cut red oak that
run's 14"-16" wide and 10 feet long. The rest is walnut, burl walnut,
crotch walnut, maple, Honduran mahogany, and other hardwoods. The 3,000+ sq
foot pile of oak in my shop is shown on ABPW. There is a trivial amount of
splitting on the untrimmed edges... after trimming there is 12"-14"X10' of
good clean veneer left from each piece. We're going to sort through the rest
of the veneer and spilt it up. The burl and crotch walnut is very nice and
the pieces are 14"-18" wide and 4'-6' long. Oh, did I mention that this was
free. :-)
John
On 7/3/2005 10:29 AM John Grossbohlin mumbled something about the following:
> Picked up about 6-7,000 square feet of veneer yesterday with another guy
> from my woodworking club. About 5,000 sq. ft. of it is flat cut red oak that
> run's 14"-16" wide and 10 feet long. The rest is walnut, burl walnut,
> crotch walnut, maple, Honduran mahogany, and other hardwoods. The 3,000+ sq
> foot pile of oak in my shop is shown on ABPW. There is a trivial amount of
> splitting on the untrimmed edges... after trimming there is 12"-14"X10' of
> good clean veneer left from each piece. We're going to sort through the rest
> of the veneer and spilt it up. The burl and crotch walnut is very nice and
> the pieces are 14"-18" wide and 4'-6' long. Oh, did I mention that this was
> free. :-)
You suck :)
--
Odinn
RCOS #7
SENS(less)
SLUG
"The more I study religions the more I am convinced that man never
worshipped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply