Motor wiring

Great.

On 7/4/2012 10:23 PM, Gramp's shop wrote:
> Buddy of mind knows about this stuff and had the motor up and running in
> no time. Now I'm down to sanding the drum true and should be in full
> operation soon.
>
>
> On 7/3/2012 8:48 PM, Gramp's shop wrote:
>> I have a 1 hp motor that I want to deploy for my drum sander. I know
>> squat about motor wiring. The motor draws about 13 amps at 110, so I
>> bought 12 gauge. Opening the wiring access panel reveals one free white
>> wire and one free yellow wire and a ground screw. Several other wires
>> are joined together by wire nuts. The wiring plate informs me that the
>> motor direction can be reversed by moving two wires to different posts.
>> The posts are nowhere to be found in the wiring access panel.
>>
>> There is another panel that houses the capacitator. So ... I want to
>> make sure I am wiring this correctly, that the motor is set to 110
>> rather than 220. I have not removed the capacitator, but guess that is
>> my next step.
>>
>> Finally, I don't want to burn out the motor -- or fry myself in the
>> process.
>>
>> All instructions, suggestions will be appreciated.
>>
>> Larry
>
>

Buddy of mind knows about this stuff and had the motor up and running in
no time. Now I'm down to sanding the drum true and should be in full
operation soon.


On 7/3/2012 8:48 PM, Gramp's shop wrote:
> I have a 1 hp motor that I want to deploy for my drum sander. I know
> squat about motor wiring. The motor draws about 13 amps at 110, so I
> bought 12 gauge. Opening the wiring access panel reveals one free white
> wire and one free yellow wire and a ground screw. Several other wires
> are joined together by wire nuts. The wiring plate informs me that the
> motor direction can be reversed by moving two wires to different posts.
> The posts are nowhere to be found in the wiring access panel.
>
> There is another panel that houses the capacitator. So ... I want to
> make sure I am wiring this correctly, that the motor is set to 110
> rather than 220. I have not removed the capacitator, but guess that is
> my next step.
>
> Finally, I don't want to burn out the motor -- or fry myself in the
> process.
>
> All instructions, suggestions will be appreciated.
>
> Larry

Well that's tough.

You need to provide more info. How about taking pics of the panel and
existing wiring for us.

Put the camera in macro mode. You don't need to open the capacitor
housing.

Then we can help.

On 7/3/2012 9:48 PM, Gramp's shop wrote:
> I have a 1 hp motor that I want to deploy for my drum sander. I know
> squat about motor wiring. The motor draws about 13 amps at 110, so I
> bought 12 gauge. Opening the wiring access panel reveals one free white
> wire and one free yellow wire and a ground screw. Several other wires
> are joined together by wire nuts. The wiring plate informs me that the
> motor direction can be reversed by moving two wires to different posts.
> The posts are nowhere to be found in the wiring access panel.
>
> There is another panel that houses the capacitator. So ... I want to
> make sure I am wiring this correctly, that the motor is set to 110
> rather than 220. I have not removed the capacitator, but guess that is
> my next step.
>
> Finally, I don't want to burn out the motor -- or fry myself in the
> process.
>
> All instructions, suggestions will be appreciated.
>
> Larry