I need to make some rails and stiles with black color. I want to stain
and not paint. I've reviewed some of the older links to this sort of
topic and not exactly any sure-fire easy answers.
I'm willing to work with any wood, although I do have lots of oak and
cherry on hand always.
Anyone found a decent off the shelf solution?
Mitch
On Sun, 08 May 2005 20:41:51 GMT, "Steven and Gail Peterson"
<[email protected]> wrote:
>metal acid dye. Check at Woodcraft if you have one around.
Black Solar Lux also works well. Many Woodcraft stores also carry
Solar Lux.
Barry
Ba r r y <[email protected]> wrote in
news:[email protected]:
> On Sun, 08 May 2005 20:41:51 GMT, "Steven and Gail Peterson"
> <[email protected]> wrote:
>
>>metal acid dye. Check at Woodcraft if you have one around.
>
> Black Solar Lux also works well. Many Woodcraft stores also carry
> Solar Lux.
>
I've used this, and been pleased. On various maples & sapwood cherry.
The process is pretty painless, with predictable results.
Patriarch
I've ebonized a handrail made from poplar using a water-based Transtint
black dye. I used three or four coats of the dye, lightly sanding
between coats to remove any raised grain. Then finished using a
water-based gloss polyurethane. It turned out jet black and shiny almost
like a black enamel paint job.
In retrospect, I would probably use fewer coats of dye next time since
the handrail shows virtually no grain. It does however show any and all
imperfections in the wood because of the gloss.
MVG wrote:
> I need to make some rails and stiles with black color. I want to stain
> and not paint. I've reviewed some of the older links to this sort of
> topic and not exactly any sure-fire easy answers.
>
> I'm willing to work with any wood, although I do have lots of oak and
> cherry on hand always.
>
> Anyone found a decent off the shelf solution?
>
> Mitch
>
I had black solar lux turn a tone of purple on me when applying poly to a
semi-dried surface. Make sure you test application and finish before
application to your final piece.
"Ba r r y" <[email protected]> wrote in message
news:[email protected]...
> On Sun, 08 May 2005 20:41:51 GMT, "Steven and Gail Peterson"
> <[email protected]> wrote:
>
> >metal acid dye. Check at Woodcraft if you have one around.
>
> Black Solar Lux also works well. Many Woodcraft stores also carry
> Solar Lux.
>
> Barry
On 8 May 2005 13:37:39 -0700, "MVG" <[email protected]> wrote:
>I need to make some rails and stiles with black color. I want to stain
>and not paint. I've reviewed some of the older links to this sort of
>topic and not exactly any sure-fire easy answers.
>
>I'm willing to work with any wood, although I do have lots of oak and
>cherry on hand always.
>
>Anyone found a decent off the shelf solution?
India ink works really well for me, and gives a truer black than
ebonizing stain. Just make sure you use an appropriate top coat, or
you could dissolve the ink. (I started with Shellac, and that took
the ink right off, but water-borne poly worked just fine)
Aut inveniam viam aut faciam
On 8 May 2005 13:37:39 -0700, "MVG" <[email protected]> wrote:
>I need to make some rails and stiles with black color.
>I'm willing to work with any wood, although I do have lots of oak
Oak blackens easily. Painting or dipping with liquid ammonia solution,
about 25% (not gas fuming) will give a dark colour similar to oak that's
a few hundred years old.
The iron acetate / vinegar and wire wool ebonising solution gives an
even darker black on oak. Search this group for details.
--
Cats have nine lives, which is why they rarely post to Usenet.
metal acid dye. Check at Woodcraft if you have one around.
Steve
"MVG" <[email protected]> wrote in message
news:[email protected]...
>I need to make some rails and stiles with black color. I want to stain
> and not paint. I've reviewed some of the older links to this sort of
> topic and not exactly any sure-fire easy answers.
>
> I'm willing to work with any wood, although I do have lots of oak and
> cherry on hand always.
>
> Anyone found a decent off the shelf solution?
>
> Mitch
>
> "MVG" <[email protected]> wrote in message
> news:[email protected]...
>>I need to make some rails and stiles with black color. I want to stain
>> and not paint. I've reviewed some of the older links to this sort of
>> topic and not exactly any sure-fire easy answers.
>>
>> I'm willing to work with any wood, although I do have lots of oak and
>> cherry on hand always.
>>
>> Anyone found a decent off the shelf solution?
>>
>> Mitch
>>
Hi Mitch,
I once tried the Vinegar and steel wool technique:
Got some white vinegar, poured some in a jar, shredded some fine steel wool
into it. Let it sit for a coupel days. Shaking occasionally.
Then I dunked a piece of oak into it.
It definitely turned black but not deep dark black. More of a grey. I dont'
know if the ratio of vinegar to steel wool would affect that.
I tried india ink as a dye. Got it nice and black but it came off when I
brushed on some varnish later.
Tried minwax ebony stain. Worked ok. More brown than black.
--
Saville
Replicas of 15th-19th century nautical navigational instruments:
http://home.comcast.net/~saville/backstaffhome.html
Restoration of my 82 year old Herreshoff S-Boat sailboat:
http://home.comcast.net/~saville/SBOATrestore.htm
Steambending FAQ with photos:
http://home.comcast.net/~saville/Steambend.htm