Howdy all you chipper chaps!
I'm going to add 3" of insulation to the outside of my 1920's vintage
home and do a half-timber treatment. I have to re-do the windows to
accomodate the 3" added thickness.
The house presently has the most disgusting, ultra-cheap, poorly made
slider windows I have ever seen. However, there is nothing wrong with
the glass.
I'd like to build my own deep-framed traditional style casement windows
and reuse the existing glass.
I have built MANY different kinds of things but I have never tried
making my own windows. I thought there would be at least some DIY
window-makers sites on the Net but I haven't found any.
Anybody know good sources of info on traditional window making? (I
don't want to make mistakes where other's have already figured out how
to do it right!)
Thanks gang!
--
Calamity Jane
> "Calamity Jane" <[email protected]> wrote in message
>>
>> I'd like to build my own deep-framed traditional style casement windows
>> and reuse the existing glass.
>>
>> I have built MANY different kinds of things but I have never tried
>> making my own windows. I thought there would be at least some DIY
>> window-makers sites on the Net but I haven't found any.
One consideration is the used glass. If you can make the windows that same
size it maybe fine. If the glass has to be cut, you may have problems. Old
glass has minute, invisible scratches that can make it break in odd ways.
Re-cycling and cost saving is great as long as it does not add to the
problems.
Post some photos of your progress as it sounds like an interesting project.
--
Ed
http://pages.cthome.net/edhome/
"Calamity Jane" <[email protected]> wrote in message
news:[email protected]...
>
> Howdy all you chipper chaps!
>
> I'm going to add 3" of insulation to the outside of my 1920's vintage
> home and do a half-timber treatment. I have to re-do the windows to
> accomodate the 3" added thickness.
>
> The house presently has the most disgusting, ultra-cheap, poorly made
> slider windows I have ever seen. However, there is nothing wrong with
> the glass.
>
> I'd like to build my own deep-framed traditional style casement windows
> and reuse the existing glass.
>
> I have built MANY different kinds of things but I have never tried
> making my own windows. I thought there would be at least some DIY
> window-makers sites on the Net but I haven't found any.
>
> Anybody know good sources of info on traditional window making? (I
> don't want to make mistakes where other's have already figured out how
> to do it right!)
>
> Thanks gang!
>
>
> --
> Calamity Jane
I would find an antique window that I like and dissect it to see how it's
built.
You will need to settle on the type of wood to use.
You will need to plane the wood for thickness and straightness, allowing for
the tendency wood has to bow and warp after it's milled.
The tools I've used when making a new sash are as follows,
Table saw, jointer, thickness planer, shaper, hand planes, chisels,
combination square, tenon jig, drill press (for mortises), and so forth.
There is an out of print book , "Getting the Most Out of Your Shaper",
published by Delta, that has an excellent section on sash making. The book
is available from Amazon and other sources on the net.
You'll enjoy the adventure.
:-)