I have received some Lowe's gift cards for my birthday and plan to use
them to buy a jigsaw. Everything I read about the Bosch 1590 is great
but my hands are kinda small and that is a pretty big chunk of tool.
I was looking at the Hitachi jigsaw today. It has a little less power
and reqires a hex wrench to rotate the sole. It fit my hand a lot
better, but I have not seen any reviews of it. Do any of you have any
experience with it?
Dick Durbin
You would have been quite pleased with the Hitachi. Nice saw.
"ddakadmc" <[email protected]> wrote in message
news:[email protected]...
> I struggled over the jigsaw purchase as well, and I bit the bullet and
> bought the Bosch and I am so very glad I did. I was able to compare it
> to a Craftsman (newest model) and a Skil and there was NO comparison.
>
> The only other jigsaws I tried that compares are Hilti and Festool.
> They are VERY nice but I did not see additional features or a smoother
> feel to spend another $100+. Hilti does have one that is $200 but
> doesn't have any of the features Bosch has.
>
> Lowes does special order as was mentioned in a previous post if you
> want the barrel version, which they offered to do for me.
>
> I don't think you can do better than the Bosch. I have 4 pieces of
> Hitachi power tools that I really like, but I could not rationalize
> anything less than the Bosch. That said, I have heard from a few
> woodworking friends and my brother-in-law (general contractor) who like
> the new DeWalt, which Lowes just got in and it is $10 less than the
> Bosch.
>
> Good luck,
> Doug
>
Maybe the 1590's size would be an advantage - with the extra weight and
just the "substantial-ness" of the tool, as well as how smooth it runs
and cuts, it doesn't jump around or require as much guidance as my old
B&D did. You don't need to push down on it or anything, just kind of
direct where you want it to go, and it does so smoothly and without
"complaining".
I'd reconsider, and at least try the 1590 (or 1591) if you can.
Andy
I agree. That barrel grip saw is incredible. You can make an easy S
cut in a 2x10 and be pretty much square along the cut edge.
If you have doubts, go to amazon.com and read the reviews.
I really took advantage of the angle cuts you are able to do with it.
Also, you can adjust the speed, the blower, and the aggressiveness of
the cut (how much it moves forward each stroke).
Holding it by the motor gives you much better control with no carpal
tunnel moves of the wrist.
Jeff
I went back to Lowe's today and played with the 1590 and, in spite of
its mass, it has more features that I really like than anything else
out there. I am going to save the gift cards for another day, though.
I ordered the Bosch online tonight for $133 including shipping. Lowe's
price was $169 plus tax.
I struggled over the jigsaw purchase as well, and I bit the bullet and
bought the Bosch and I am so very glad I did. I was able to compare it
to a Craftsman (newest model) and a Skil and there was NO comparison.
The only other jigsaws I tried that compares are Hilti and Festool.
They are VERY nice but I did not see additional features or a smoother
feel to spend another $100+. Hilti does have one that is $200 but
doesn't have any of the features Bosch has.
Lowes does special order as was mentioned in a previous post if you
want the barrel version, which they offered to do for me.
I don't think you can do better than the Bosch. I have 4 pieces of
Hitachi power tools that I really like, but I could not rationalize
anything less than the Bosch. That said, I have heard from a few
woodworking friends and my brother-in-law (general contractor) who like
the new DeWalt, which Lowes just got in and it is $10 less than the
Bosch.
Good luck,
Doug
Here's what Merriam Webster's Collegiate Dictionary, Tenth Edition, has
to say about "irregardless." "Irregardless originated in dialectical
American speech in the early 20th century. Its fairly widespread use
in speech called it to the attention of usage commentators as early as
1927. The most frequently repeated remark about it is that "there is
no such word." There is such a word, however. It is still used
primarily in speech, although it can be found from time to time in
edited prose. Its reputation has not risen over the years, and it is
still a long way from general acceptance. Use "regardless" instead."
Dick "I am not a revisionist" Durbin
Many people believe a "Webster's" dictionary is authoritative.
However, there is neither a copyright on the name nor a set of
standards for publishing a "Webster's" dictionary. Therefore, anyone
can publish his own version of a "Webster's" dictionary without meeting
any generally agreed-upon definitions.
Additionally, Webster's dictionaries tend to be "descriptive" - that
is, describing how words are being used in society, rather than how
they *should* be used.
The more prescriptive American Heritage College Dictionary, Third
Edition, provides these guidelines on "irregardless:"
ir-re-gard-less adv. NON-STANDARD. Regardless
Usage note: The label Non-Standard does only approximate justice to the
status of irregardless. More precisely, it is a form that many people
mistakenly believe to be a correct usage in formal style but that in
fact has no legitimate antecedents in either standard or nonstandard
varieties. The word was likely coined from a blend of irrespective and
regardless.
[with apologies for continuing OT]
Andy wrote:
> Maybe the 1590's size would be an advantage - with the extra weight and
> just the "substantial-ness" of the tool, as well as how smooth it runs
> and cuts, it doesn't jump around or require as much guidance as my old
> B&D did. You don't need to push down on it or anything, just kind of
> direct where you want it to go, and it does so smoothly and without
> "complaining".
> I'd reconsider, and at least try the 1590 (or 1591) if you can.
Is the barrel grip suitable for use on vertical surfaces, or completely
upside down? There are certain times on a job site where it would be
handy to be able to do so.
JP
**************
Inverted.
I got home today and the power tool fairy had arrived with the new
Bosch 1590. I needn't have worried about the size of the saw.
I didn't even change clothes before loading a blade and cutting out a
couple of pieces for an Adirondack chair. I wish I didn't have to go
to a meeting at church tonight or I would finish the rest of the cuts.
This thing is amazing.
Dick Durbin
On Sat, 19 Nov 2005 12:36:13 +0000, Andy Dingley
<[email protected]> wrote:
>I can look at the edge _afterwards_ and tell which jigsaw I used
>(cheap B&D or Bosch barrel body)
Now the question I have is: if you have a Bosch barrel body, why do
you still have a cheap B&D?
--
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net
Proud participant of rec.woodworking since February, 1997
On Thu, 17 Nov 2005 03:07:38 GMT, Lew Hodgett <[email protected]>
wrote:
>Can we all say, "Cheapskate"?
That's unfair.
People who haven't _used_ a good jigsaw just don't appreciate how much
better they are.
On Thu, 17 Nov 2005 23:24:43 -0500, with neither quill nor qualm,
Odinn <[email protected]> quickly quoth:
>On 11/17/2005 11:15 PM LRod mumbled something about the following:
>> On Thu, 17 Nov 2005 20:16:47 -0700, "James \"Cubby\" Culbertson"
>> <[email protected]> wrote:
>>
>>>Irregardless,
>>
>> Irregardless? What does that mean?
"Without no regard." he drawled, with the same inbred accent as the
person who wrote it. ;>
>irregardless
>
>adv : regardless; a combination of irrespective and regardless sometimes
>used humorously
Egad! What fracking revisionist dictionary spawned that mess?
<sigh>
--
Save the Endangered ROAD NARROWS! -|- www.diversify.com
Ban SUVs today! -|- Full Service Websites
<[email protected]> wrote in message
news:[email protected]...
> On Wed, 16 Nov 2005 21:23:08 -0700, "James \"Cubby\" Culbertson"
> <[email protected]> wrote:
>
>
> I've used both the barrel grip and the top handle versions. I prefer
> the top handle. I suspect that a small handed person would too.
That certainly sounds reasonable if you have small hands. Seems the barrel
grip would be a bit hard to grasp for some one with small hands. I have
pretty large hands and still small the top handle. When I was about 10 my
father owned an old Sun Beam Saber saw that was ALL metal and a barrel grip.
That sucker would get too hot to hold. When I finally saw a top handle
style I found that it was not as hot to handle for long periods. Now that
every thing is plastic I doubt that the heat is as much of a factor anymore.
On Thu, 17 Nov 2005 03:01:14 GMT, "Dave" <[email protected]> wrote:
>Check out the Bosch 1591 barrel grip. that's the one Norm uses. I like mine
>a lot.
Actually, it's unproven yet that such is the case. In years past, he's
used three iterations of barrel grip Bosches, but the single instance
of the new Bosch in the 2005 season (Episode 1708) was too fleeting
(at least to my eye) to categorically assert whether it was a 1590 or
1591. The fronts of both saws are indistinguishable from one another
and the front is all one could see in that episode.
Now if someone happened to see him using the saw by watching the shop
shots during filming and would let me know which it was, I'd be happy
to back away from my assessment.
--
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net
Proud participant of rec.woodworking since February, 1997
On Wed, 16 Nov 2005 21:23:08 -0700, "James \"Cubby\" Culbertson"
<[email protected]> wrote:
>
>"Dave" <[email protected]> wrote in message
>news:_nSef.551265$_o.383605@attbi_s71...
>> Check out the Bosch 1591 barrel grip. that's the one Norm uses. I like
>> mine
>> a lot.
>>
>I'll ditto the 1591 Barrel grip version. I have pretty small hands as well
>and the barrel grip works just fine. It's, I hope, the last Jigsaw I buy.
>Cheers,
>cc
>
I've used both the barrel grip and the top handle versions. I prefer
the top handle. I suspect that a small handed person would too.
Don't know about Lowes, but I do know that HomeDepot
does NOT accept giftcards for payment of online or catalog
orders - and only have the 1590 on the shelf, the 1591 is ONLY
listed online and in the catalog - and at least the local HD
will NOT special order the 1591 for instore purchase
John
On Thu, 17 Nov 2005 14:10:46 GMT, "Leon"
<[email protected]> wrote:
>
><[email protected]> wrote in message
>news:[email protected]...
>> Unfortunately, the OP indicated he wants to use Lowe's coupons. Lowes
>> does not sell the 1591.
>>
>> Bob
>>
>
>I wonder if they offer more choices on line.
>
Andy Dingley wrote:
> That's unfair.
It was not intended to be but rather a wake up call.
> People who haven't _used_ a good jigsaw just don't appreciate how much
> better they are.
I agree.
It also applies to almost every thing you need to purchase.
There ain't no free lunch as the old expression goes.
Lew
<[email protected]> wrote in message
news:[email protected]...
> Unfortunately, the OP indicated he wants to use Lowe's coupons. Lowes
> does not sell the 1591.
>
> Bob
>
I wonder if they offer more choices on line.
Lowes will order "anything" that they have access to....
They have been and remain a huge Bosch customer.
[email protected] wrote:
> Unfortunately, the OP indicated he wants to use Lowe's coupons. Lowes
> does not sell the 1591.
>
> Bob
>
Olebiker wrote:
> I got home today and the power tool fairy had arrived with the new
> Bosch 1590. I needn't have worried about the size of the saw.
>
> I didn't even change clothes before loading a blade and cutting out a
> couple of pieces for an Adirondack chair. I wish I didn't have to go
> to a meeting at church tonight or I would finish the rest of the cuts.
> This thing is amazing.
Not to say we told ya so, but we told ya so.
--
Mortimer Schnerd, RN
[email protected]
Check out the Bosch 1591 barrel grip. that's the one Norm uses. I like mine
a lot.
"Olebiker" <[email protected]> wrote in message
news:[email protected]...
> I have received some Lowe's gift cards for my birthday and plan to use
> them to buy a jigsaw. Everything I read about the Bosch 1590 is great
> but my hands are kinda small and that is a pretty big chunk of tool.
>
> I was looking at the Hitachi jigsaw today. It has a little less power
> and reqires a hex wrench to rotate the sole. It fit my hand a lot
> better, but I have not seen any reviews of it. Do any of you have any
> experience with it?
>
> Dick Durbin
>
The pattern seems to be: Guy with Black and Decker/Skill jigsaw reads this
group. Goes out and buys a Bosch. Proclaims that it is the best saw in the
world. I have a Hitachi. I too upgraded from a B@D. The Hitachi is a huge
step up in performance. Is the Bosch better? Who's to say, the guy that
previously owned a B@D and upgraded to the Bosch?
"LRod" <[email protected]> wrote in message
news:[email protected]...
> On Sat, 19 Nov 2005 12:36:13 +0000, Andy Dingley
> <[email protected]> wrote:
>
> >I can look at the edge _afterwards_ and tell which jigsaw I used
> >(cheap B&D or Bosch barrel body)
>
> Now the question I have is: if you have a Bosch barrel body, why do
> you still have a cheap B&D?
>
> --
> LRod
>
> Master Woodbutcher and seasoned termite
>
> Shamelessly whoring my website since 1999
>
> http://www.woodbutcher.net
>
> Proud participant of rec.woodworking since February, 1997
Leon said:
>
><[email protected]> wrote in message
>news:[email protected]...
>> Unfortunately, the OP indicated he wants to use Lowe's coupons. Lowes
>> does not sell the 1591.
>>
>> Bob
>>
>
>I wonder if they offer more choices on line.
Lowes can order anything you want from a current vendor's lineup - but
you DO have to wait for their next ship to come in. And good luck
finding anyone qualified to read the catalog and successfully _place_
the order. The help around here has degenerated into $5.75/hr. warm
bodies. And if it's a non-stock item, expect to pay a premium.
With that said, I love my Bosch Jigsaw - the feel of precision and
balance are hard to beat. The first time I used it, I could have
kicked myself for waiting so long to replace my existing jigsaws -
which both suck and will be gleefully placed in our next Garage Sale.
(One of which is an ancient B&D with a metal case - and as Leon points
out, it get's so hot you can't hold it - same with the same era sheet
sander.)
Greg G.
Olebiker wrote:
> I went back to Lowe's today and played with the 1590 and, in spite of
> its mass, it has more features that I really like than anything else
> out there. I am going to save the gift cards for another day, though.
> I ordered the Bosch online tonight for $133 including shipping. Lowe's
> price was $169 plus tax.
You won't regret it. Even if it didn't have *any* features, it's still be a
winner. There's virtually no vibration and it cuts oak like my old B&D POS cut
1/4" plywood.
--
Mortimer Schnerd, RN
[email protected]
"Olebiker" <[email protected]> wrote in message
news:[email protected]...
>I have received some Lowe's gift cards for my birthday and plan to use
> them to buy a jigsaw. Everything I read about the Bosch 1590 is great
> but my hands are kinda small and that is a pretty big chunk of tool.
>
> I was looking at the Hitachi jigsaw today. It has a little less power
> and reqires a hex wrench to rotate the sole. It fit my hand a lot
> better, but I have not seen any reviews of it. Do any of you have any
> experience with it?
>
For the most part, you get what you pay for. So, decide the
features/quality you want and what you can justify paying. Then the most
important thing is how a tool feels to you.
If the Hitachi feels good, buy it. I have never seen it, but am willing to
bet that the people who own it like it.
It may not be as good as the Bosch, but is probably cheaper; so it
represents an equal value.
> I've used both the barrel grip and the top handle versions. I prefer
> the top handle. I suspect that a small handed person would too.
Maybe it's just the fact that it feels like I have better control with the
barrel grip vs. the top handle. Irregardless, I have
small hands and I prefer the barrel grip.
Cheers,
cc
On Fri, 18 Nov 2005 21:02:42 GMT, with neither quill nor qualm, John
Girouard <[email protected]> quickly quoth:
>Larry Jaques wrote:
>>>irregardless
>>>
>>>adv : regardless; a combination of irrespective and regardless sometimes
>>>used humorously
>>
>>
>> Egad! What fracking revisionist dictionary spawned that mess?
>> <sigh>
>
>Ooo... ooo! I know this one! The same one that defines 'fracking'.
"Fracking" is a Battlestar Gallacticaism and probably hasn't hit the
revisionists' dictionaries yet.
-----------------------------------------------------------
-- This post conscientiously crafted from 100% Recycled Pixels --
http://diversify.com Websites: PHP Programming, MySQL databases
==================================================================
On Fri, 18 Nov 2005 04:02:12 GMT, Lew Hodgett <[email protected]>
wrote:
>> People who haven't _used_ a good jigsaw just don't appreciate how much
>> better they are.
>
>I agree.
>
>It also applies to almost every thing you need to purchase.
It's more important with jigsaws though.
A cheap drill still drills holes, it just doesn't have the same
reliability or battery life. A good jigsaw though is a whole different
tool. I can look at the edge _afterwards_ and tell which jigsaw I used
(cheap B&D or Bosch barrel body)
On Thu, 17 Nov 2005 20:16:47 -0700, "James \"Cubby\" Culbertson"
<[email protected]> wrote:
> Irregardless,
Irregardless? What does that mean?
--
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net
Proud participant of rec.woodworking since February, 1997
On Sat, 19 Nov 2005 17:55:53 +0000, LRod <[email protected]> wrote:
>Now the question I have is: if you have a Bosch barrel body, why do
>you still have a cheap B&D?
I don't - the Bosch is a friend's which I borrow when I'm doing anything
better than firewood.
On 11/17/2005 11:15 PM LRod mumbled something about the following:
> On Thu, 17 Nov 2005 20:16:47 -0700, "James \"Cubby\" Culbertson"
> <[email protected]> wrote:
>
>
>>Irregardless,
>
>
> Irregardless? What does that mean?
>
irregardless
adv : regardless; a combination of irrespective and regardless sometimes
used humorously
--
Odinn
RCOS #7 SENS BS ???
"The more I study religions the more I am convinced that man never
worshiped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply
"Dave" <[email protected]> wrote in message
news:_nSef.551265$_o.383605@attbi_s71...
> Check out the Bosch 1591 barrel grip. that's the one Norm uses. I like
> mine
> a lot.
>
I'll ditto the 1591 Barrel grip version. I have pretty small hands as well
and the barrel grip works just fine. It's, I hope, the last Jigsaw I buy.
Cheers,
cc
CW wrote:
> The pattern seems to be: Guy with Black and Decker/Skill jigsaw reads this
> group. Goes out and buys a Bosch. Proclaims that it is the best saw in the
> world. I have a Hitachi. I too upgraded from a B@D. The Hitachi is a huge
> step up in performance. Is the Bosch better? Who's to say, the guy that
> previously owned a B@D and upgraded to the Bosch?
You make an excellent point. I think many of us start with B&D POS jigsaws out
of ignorance. I read about the Bosch initially in (I think) FWW. They haven't
steered me wrong yet.
I could not believe the difference in the two saws. As for other high end
jigsaws, who knows? FWW?
--
Mortimer Schnerd, RN
[email protected]
This is the reason that I don't put much stock in the tool opinions on here.
I don't believe that people are giving bad advice, they just very often
don't really have any broad point of reference.
"Mortimer Schnerd, RN" <[email protected]> wrote in message
news:[email protected]...
> CW wrote:
> > The pattern seems to be: Guy with Black and Decker/Skill jigsaw reads
this
> > group. Goes out and buys a Bosch. Proclaims that it is the best saw in
the
> > world. I have a Hitachi. I too upgraded from a B@D. The Hitachi is a
huge
> > step up in performance. Is the Bosch better? Who's to say, the guy that
> > previously owned a B@D and upgraded to the Bosch?
>
>
> You make an excellent point. I think many of us start with B&D POS
jigsaws out
> of ignorance. I read about the Bosch initially in (I think) FWW. They
haven't
> steered me wrong yet.
>
> I could not believe the difference in the two saws. As for other high end
> jigsaws, who knows? FWW?
>
>
>
> --
> Mortimer Schnerd, RN
>
> [email protected]
>
>