Just got a new Craftsman table saw as a gift and I was wondering what I
should do to protect the cast iron table from rust. I have read that you
should use a non silicone paste wax but I can't seem to find it, so I
sprayed it with my Boeshield. Is this adequate or should I try to find a
paste wax? What kind of paste wax do you use? What kind of degreaser
should be used first?
Thanks,
Lars
Thanks for all of the help. I will look at that stuff from Lee Valley and
look for Johnsons on my next trip south.
Lars
"Doug Miller" <[email protected]> wrote in message
news:[email protected]...
> In article <1109468963.7c538a94b7f16a84373421439e8edfb3@teranews>,
> "Highspeed" <[email protected]> wrote:
>>Just got a new Craftsman table saw as a gift and I was wondering what I
>>should do to protect the cast iron table from rust. I have read that you
>>should use a non silicone paste wax but I can't seem to find it, so I
>>sprayed it with my Boeshield. Is this adequate or should I try to find a
>>paste wax? What kind of paste wax do you use? What kind of degreaser
>>should be used first?
>
> Boeshield will work fine.
>
> You're right about using non-silicone paste waxes: silicone interferes
> with
> many wood finishes.
>
> I was going to tell you to look for Johnson's Paste Wax, then I saw the
> "dot-ca" in your email. You can't buy Johnson's in Canada, unfortunately.
> A couple of guys here recommend Butcher's; maybe you can find that. I use
> Johnson's myself, as I don't have any trouble finding it here. I suppose I
> could send you some if you like (see sig line for real email address), but
> you
> might want to have a look at this, too:
> http://www.leevalley.com/wood/page.aspx?c=2&p=32092&cat=1,43415,43440
> Lee Valley is a Canadian company, and I imagine they'd ship that within
> Canada.
>
> I always use paint thinner (mineral spirits) as a degreaser: works fine,
> and
> it's dirt cheap (typically about US$2-3 per US gallon; not sure what that
> would be in CDN$ per liter or imperial gallon).
>
> --
> Regards,
> Doug Miller (alphageek at milmac dot com)
>
> Nobody ever left footprints in the sands of time by sitting on his butt.
> And who wants to leave buttprints in the sands of time?
Edwin Pawlowski wrote:
> Boeshield is good.
>
> As a degreaser, kerosene works well. If you can't find kero, use lamp
> oil. Same thing but has a pretty color in it.
Or buy UltraPure lamp oil... No color, almost no smell. Makes a great
trumpet valve oil too. Oh, and, hell, it even works good in oil lamps too.
But if that's too much trouble, and it was for me at the time, you can also
get cosmoline off with mineral spirits and about twice as much rubbing.
--
Michael McIntyre ---- Silvan <[email protected]>
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/
http://rosegarden.sourceforge.net/tutorial/
I have used lots of things over the last thirty years to keep my tools clean
and more importantly slippery for the wood to slide over. The weirdest (and
best) idea came from this old woodworker who used a blackboard eraser and
either chalk or talcum powder for all of his cast iron tools. It seems that
the cast iron has micro pores on its surface and the chalk fills them up
making the surface super slick.
max
> Just got a new Craftsman table saw as a gift and I was wondering what I
> should do to protect the cast iron table from rust. I have read that you
> should use a non silicone paste wax but I can't seem to find it, so I
> sprayed it with my Boeshield. Is this adequate or should I try to find a
> paste wax? What kind of paste wax do you use? What kind of degreaser
> should be used first?
>
> Thanks,
>
> Lars
>
>
"Highspeed" <[email protected]> wrote in message
news:1109468963.7c538a94b7f16a84373421439e8edfb3@teranews...
> Just got a new Craftsman table saw as a gift and I was wondering what I
> should do to protect the cast iron table from rust. I have read that you
> should use a non silicone paste wax but I can't seem to find it, so I
> sprayed it with my Boeshield. Is this adequate or should I try to find a
> paste wax? What kind of paste wax do you use? What kind of degreaser
> should be used first?
>
> Thanks,
>
> Lars
>
Boeshield is good.
As a degreaser, kerosene works well. If you can't find kero, use lamp oil.
Same thing but has a pretty color in it.
As for preventing rust, keep it coated with either Boeshield, Top Cote, or
paste was. Next thing you should do is ditch the blade that came with it.
Use it for construction work, but not for anything you want a nice fit and
finish on.
Good luck with your new saw. Use it safely and it will make some beautiful
things around the house. If you are new to woodworking, take a course to
learn the basics.
--
Ed
http://pages.cthome.net/edhome/
Highspeed wrote:
> Just got a new Craftsman table saw as a gift and I was wondering what I
> should do to protect the cast iron table from rust. I have read that you
> should use a non silicone paste wax but I can't seem to find it, so I
> sprayed it with my Boeshield. Is this adequate or should I try to find a
> paste wax? What kind of paste wax do you use? What kind of degreaser
> should be used first?
I degrease with a spray can of brake cleaner, available at any auto parts store.
Then you can either spray with Boeshield or rub it down with Johnson's paste
wax.
--
Mortimer Schnerd, RN
[email protected]
In article <1109468963.7c538a94b7f16a84373421439e8edfb3@teranews>, "Highspeed" <[email protected]> wrote:
>Just got a new Craftsman table saw as a gift and I was wondering what I
>should do to protect the cast iron table from rust. I have read that you
>should use a non silicone paste wax but I can't seem to find it, so I
>sprayed it with my Boeshield. Is this adequate or should I try to find a
>paste wax? What kind of paste wax do you use? What kind of degreaser
>should be used first?
Boeshield will work fine.
You're right about using non-silicone paste waxes: silicone interferes with
many wood finishes.
I was going to tell you to look for Johnson's Paste Wax, then I saw the
"dot-ca" in your email. You can't buy Johnson's in Canada, unfortunately.
A couple of guys here recommend Butcher's; maybe you can find that. I use
Johnson's myself, as I don't have any trouble finding it here. I suppose I
could send you some if you like (see sig line for real email address), but you
might want to have a look at this, too:
http://www.leevalley.com/wood/page.aspx?c=2&p=32092&cat=1,43415,43440
Lee Valley is a Canadian company, and I imagine they'd ship that within
Canada.
I always use paint thinner (mineral spirits) as a degreaser: works fine, and
it's dirt cheap (typically about US$2-3 per US gallon; not sure what that
would be in CDN$ per liter or imperial gallon).
--
Regards,
Doug Miller (alphageek at milmac dot com)
Nobody ever left footprints in the sands of time by sitting on his butt.
And who wants to leave buttprints in the sands of time?