http://www.onlinetoolreviews.com/reviews/ryobiap13.htm
--
Regards,
Dean Bielanowski
Editor,
Online Tool Reviews
http://www.onlinetoolreviews.com
------------------------------------------------------------
Latest 5 Reviews:
- Ryobi Reciprocating Saw
- Infinity Router Bits
- Incra Wonder Fence
- Veritas Jointer Blade Sharpener
- Miller Dowel System
------------------------------------------------------------
"ng" <[email protected]> wrote in message news:[email protected]...
> Any comments on the Roybi planer; is it worth the buy for hobby use?
> Is it powerful enough to use on hard maple and easy on softer woods?
> thanks.
>
Freud has the planer blades for the Ryobi AP 10.
Ryobi is the basic inventor of the Benchtop planer, I have been brutilizing
one now for over 12 years.
I know one day its gonna tell me "Srcew you I just died" I was going to buy
the new 12" model they have but now have my eye on the Dewalt 735, Mainly
because of the 3 knives.
If there is ever a tool I got my money's worth out of 20 fold it has surely
been the AP10 If the 12" model is half no 1 tenth as good as the AP10 it is
worth the 250.00.
The original list price on the AP10 was 899.00 I used to laugh at anyone
buying one Not so much as the money,
A 60lb portable planer and i would laugh my as off, I bought on for a
specific operation and have brutilized ever since
Good Luck, George
"George" <[email protected]> wrote in message
news:[email protected]...
> Pick the model number of one of their older products and see if you can
get
> parts for it. I haven't seen blades available anywhere for my 7 year old
> Ryobi jointer in some time...
>
> "ng" <[email protected]> wrote in message news:[email protected]...
> > Any comments on the Roybi planer; is it worth the buy for hobby use?
> > Is it powerful enough to use on hard maple and easy on softer woods?
> > thanks.
> >
>
>
I've got one of the original Ryobi AP-10 planers that I bought about 14 or
15 years ago. Still runs very well. I've planed everything from Maple to
Teak to Rosewood on it over the years. Spent last weekend planing down some
Bubinga without trouble and got a very nice finish on it.
Key is to keep the blades sharp (I've got a couple of sets, when one gets
dull, the sharp set gets put on and the dull set goes to be sharpened) and
the rollers clean.
All in all it's been a good hobbyists tool - I use it on every project I do
to dimension my lumber. I doubt it's as good as some of the new 3 knife
multi-speed planers that have just come out. If I was buying now (and buying
new) - I'd be looking at the new DeWalt 735.
"ng" <[email protected]> wrote in message news:[email protected]...
> Any comments on the Roybi planer; is it worth the buy for hobby use?
> Is it powerful enough to use on hard maple and easy on softer woods?
> thanks.
>
Look at highland-hardware.com or Jesada tools.
On Mon, 3 Nov 2003 12:20:02 -0500, "George" <[email protected]>
wrote:
>Pick the model number of one of their older products and see if you can get
>parts for it. I haven't seen blades available anywhere for my 7 year old
>Ryobi jointer in some time...
>
Keep in mind that the new one is 13", not 10" any more, and now uses
disposable blades (IIRC, haven't changed mine yet). I can tell you that I
definitely get snipe, but I can also tell you that I've not taken the time
to adjust the tables, and they are *clearly* not adjusted correctly.
Everyone that I've heard from who has taken that time has eliminated their
snipe.
thanks,
--randy
"Lazarus Long" <[email protected]> wrote in message
news:[email protected]...
> I had one for many years. I sold it along with a 6" jointer to
> someone without a big budget for such things. I was ready for better
> machines. That said, the Ryobi AP-10 planed through anything I cared
> to put through it (Oak, Ash, Maple, Cherry, Teak) and did it well. A
> well maintained machine will do an excellent job. Provided of course
> that you're planing 10" width or less.
>
> On Mon, 03 Nov 2003 14:38:36 GMT, ng <[email protected]> wrote:
>
> >Any comments on the Roybi planer; is it worth the buy for hobby use?
> >Is it powerful enough to use on hard maple and easy on softer woods?
> >thanks.
>
"ng" <[email protected]> wrote in message news:[email protected]...
>
>
> Any comments on the Roybi planer; is it worth the buy for hobby use?
> Is it powerful enough to use on hard maple and easy on softer woods?
> thanks.
If you mean the one at Home Depot for $249 - one magazine gave it a bad
rating - snipe and tear out. Another magazine gave it a good score. Last
time I looked for owner's comments on the web - all were favorable. Power
wasn't mentioned IIRC.
Me thinks it's a good planer if your limit is $250...
I had one for many years. I sold it along with a 6" jointer to
someone without a big budget for such things. I was ready for better
machines. That said, the Ryobi AP-10 planed through anything I cared
to put through it (Oak, Ash, Maple, Cherry, Teak) and did it well. A
well maintained machine will do an excellent job. Provided of course
that you're planing 10" width or less.
On Mon, 03 Nov 2003 14:38:36 GMT, ng <[email protected]> wrote:
>Any comments on the Roybi planer; is it worth the buy for hobby use?
>Is it powerful enough to use on hard maple and easy on softer woods?
>thanks.
Pick the model number of one of their older products and see if you can get
parts for it. I haven't seen blades available anywhere for my 7 year old
Ryobi jointer in some time...
"ng" <[email protected]> wrote in message news:[email protected]...
> Any comments on the Roybi planer; is it worth the buy for hobby use?
> Is it powerful enough to use on hard maple and easy on softer woods?
> thanks.
>