On 7/13/2014 2:52 PM, Lloyd E. Sponenburgh wrote:
> JAS <[email protected]> fired this volley in news:lpujhq$dg7$1@dont-
> email.me:
>
>>> 3234 might be for dusting flowers or roses...
>>>
>> My thoughts also.
>
> Try to use it horizontally, or tilted upward. Won't work.
> L
>
Why not?
The container would be on top, not on bottom like shown.
The plunger is what sends the dust out. A little at a time.
--
Jeff
On 7/17/2014 7:32 AM, Markem wrote:
> On Thu, 17 Jul 2014 07:21:15 -0400, Stormin Mormon
>>>
>> I went back and read the posts I have for this
>> group, and didn't find the answers any where.
>
> Guess you will remain ignorant
>
Guess you will refuse to be kind, gracious,
and helpful?
Does it occur to anyone that when a person
repeatedly asks for information, the kind
thing to do is to provide the information?
What does that say about you bunch of cruel
and sarcastic information deniers? Did your
psychiatrist ever diagnose your as anal
retentive?
--
.
Christopher A. Young
Learn about Jesus
www.lds.org
.
In article <[email protected]>, Lloyd
E. Sponenburgh wrote:
> woodchucker <[email protected]> fired this volley in
> news:[email protected]:
>
> > there is a cap that would contain it.
>
> Then how could it feed, with the tip above horizontal?
Maybe it's for loading fireworks.
Joe Gwinn
On 10 Jul 2014 00:46:34 -0700, Rob H. wrote:
> I need some help with numbers 3231, 3233, and 3234 this week:
Sorry, but as always I'm lousy at these, and can't help with any of
those.
But surely 3230 is a bulk milk container, used for pouring into smaller
containers in the old days when milkmen didn't deliver one-quart glass
bottles? Watch me be wrong.
--
Ted S.
fedya at hughes dot net
Now blogging at http://justacineast.blogspot.com
On Thu, 17 Jul 2014 12:19:08 -0400, Stormin Mormon
<[email protected]> wrote:
>On 7/17/2014 7:32 AM, Markem wrote:
>> On Thu, 17 Jul 2014 07:21:15 -0400, Stormin Mormon
>>>>
>>> I went back and read the posts I have for this
>>> group, and didn't find the answers any where.
>>
>> Guess you will remain ignorant
>>
>
>Guess you will refuse to be kind, gracious,
>and helpful?
>
>Does it occur to anyone that when a person
>repeatedly asks for information, the kind
>thing to do is to provide the information?
>
>What does that say about you bunch of cruel
>and sarcastic information deniers? Did your
>psychiatrist ever diagnose your as anal
>retentive?
Last month I told you how to find the answer in plain english. Rob
does not put answer in the subject line, now others have found the
answers. Why can you not?
On Thu, 17 Jul 2014 06:32:34 -0500, Markem <[email protected]>
wrote:
>On Thu, 17 Jul 2014 07:21:15 -0400, Stormin Mormon
><[email protected]> wrote:
>
>>On 7/13/2014 7:49 AM, Stormin Mormon wrote:
>>>
>>> Sunday AM, and no answers yet? I keep looking for
>>> answers in the subject line.
>>>
>>>
>>I went back and read the posts I have for this
>>group, and didn't find the answers any where.
>
>Guess you will remain ignorant
You said a mouthful.
On 7/13/2014 4:28 PM, Lloyd E. Sponenburgh wrote:
> woodchucker <[email protected]> fired this volley in news:-LCdnSlAEOPUd1
> [email protected]:
>
>> Why not?
>>
>
> Check the angle on the filler funnel. You cannot use it more tilted up
> than just a little above horizontal. If the 'hopper' is even halfway
> filled, it will spill out at horizontal, and empty itself completely when
> the tip is tilted above horizontal.
>
> Roses (and most plants) need to be dusted on the bottoms of the leaves as
> well as the tops.
>
> Not that... It's designed to be used vertically.
>
> Lloyd
>
there is a cap that would contain it.
--
Jeff
On 7/10/2014 2:46 AM, Rob H. wrote:
> I need some help with numbers 3231, 3233, and 3234 this week:
>
> http://55tools.blogspot.com/
>
> Larger images:
>
> http://imgur.com/gallery/lCR31/new
>
>
> Rob
>
3230 Milk transport jug
3231 Automatic brake adjustment lever that fits on the bottom between
the two brake shoes on the early to mid 70"s Chevrolet Vega and Monza,
Olds StafFire, Buick Skyhawk, and Pontiac Astre?
Can't tell you how many of these I have replaced. Replacement was
necessary as the unit would not collapse when installing new brake
shoes, it would only expand with each application of the parking brake
lever. Actually there was a tool to collapse the internal "one way"
piece but the tool was more expensive than the part and therefore more
time consuming.
Lloyd E. Sponenburgh wrote:
> Rob H. <[email protected]> fired this volley in
> news:[email protected]:
>
>> Text on it reads "PAT. JUNE. 24 .29", but that's not a Tuesday, so
>> either it's an incorrect date or not a U.S. patent. One of my friends
>> did some research and reported: "That date was a valid patent date
>> for Greece, England, Germany, France and Denmark. There were 262
>> patents issued on that date in those countries combined, and I
>> looked at those from England with no obvious hits."
>>
>> The end of the plunger is tapered, a photo of it can be seen here:
>>
>> http://www.collectorsweekly.com/stories/126511-unknown-gun-powder-relod
>> ing- funnel-t?in=1129
>>
>>
>>
>
> Rob, I don't like it for a powder loader, by virtue of the fact that
> it has no means to limit the amount of the charge. Powder piston
> loaders almost all have a means to meter out a fixed amount of powder
> per stroke.
>
> That one seems to just admit powder more-or-less endlessly, without
> any particular method of stopping it. The tip would ram it, but what
> would stop the powder remaining in the tube from just 'drizzling out'
> when it was removed from the sprue it was intended to fill?
>
> No... being a pyro person, I'm not happy with that being _anything_ to
> load powder into _anything_.
> (could be wrong, though. wouldn't be the first time!)
>
> LLoyd
I think it's for medicating small animals . I know what a problem I have
giving our dog her meds <monthly flea pill , aspirin for her aches> . Drop
pill in funnel , insert tube into mouth , pull plunger and follow the pill
down .
--
Snag
Stormin Mormon wrote:
Followups set.
> On 7/13/2014 7:49 AM, Stormin Mormon wrote:
>>
>> Sunday AM, and no answers yet? I keep looking for
>> answers in the subject line.
>>
>>
> I went back and read the posts I have for this
> group, and didn't find the answers any where.
It sounds like you're looking in the wrong place.
The images for the current puzzle are posted on a Web page. Clearly, while
the puzzle is live, the answers won't appear on that page. But the Web page
contains a link to the previous week's puzzle. If you navigate to that page,
you can find the answers about half-way down the page. It's not surprising
that it's half-way down, because each half contains the images, which
dominate the space taken up by the page. The top half is the images without
the answers, and the bottom half is the images with the answers.
I have never, ever, ever bothered to look for the answers before, let alone
look at them. But I found them within a few seconds of deciding to look.
If you are really, really struggling to find the answers, simply click in
your address bar (in your browser), and change the URL by adding "#answers"
as in the following example:
http://55tools.blogspot.co.uk/2014/07/set-553.html
becomes
http://55tools.blogspot.co.uk/2014/07/set-553.html#answers
Hit your "Enter" or "Return" key, and the browser will jump to the answers.
I hope that is helpful to you. I hope it solves a long-time mystery for you.
I hope it is now clear to you how to find the answers.
--
Richard Heathfield
Email: rjh at cpax dot org dot uk
"Usenet is a strange place" - dmr 29 July 1999
Sig line 4 vacant - apply within
On 7/13/2014 12:14 AM, John wrote:
> Rob H. wrote:
>> I need some help with numbers 3231, 3233, and 3234 this week:
>>
>> http://55tools.blogspot.com/
>>
>> Larger images:
>>
>> http://imgur.com/gallery/lCR31/new
>>
>>
>> Rob
>>
>
>
> 3234 may be a tube for force feeding ducks or geese .
>
> john
>
>
>
> .
Sunday AM, and no answers yet? I keep looking for
answers in the subject line.
--
.
Christopher A. Young
Learn about Jesus
www.lds.org
.
On 7/13/2014 5:51 PM, woodchucker wrote:
> On 7/13/2014 5:07 PM, Lloyd E. Sponenburgh wrote:
>> woodchucker <[email protected]> fired this volley in
>> news:[email protected]:
>>
>>> there is a cap that would contain it.
>>
>> Then how could it feed, with the tip above horizontal?
>>
>> Lloyd
>>
>
> There is a pump handle... it pumps probably a mixture of air and the
> powder.
>
> Whatever it is , it appears to be a pump for distributing a small (fine)
> amount of particulate ..
>
Coarse grained material or viscous fluid also possible.
Turn it so the tube is at an angle and the funnel is upright.
Leave rod in down position, remove funnel cap, fill funnel to level,
with the rod acting as a shut off valve, return funnel cover, raise rod
to allow contents of funnel to flow down tube.
Funnel acts as rough measure.
Rob H. <[email protected]> fired this volley in
news:[email protected]:
> I had a typo in my description which I changed earlier, it's actually
> a five gallon container. And after doing some searching, it looks like
> it was probably used for something other than milk.
>
Gotta be for syrup, then. Figure it's the transfer container for maple
sugaring.
LLoyd
JAS <[email protected]> fired this volley in news:lpujhq$dg7$1@dont-
email.me:
>> 3234 might be for dusting flowers or roses...
>>
> My thoughts also.
Try to use it horizontally, or tilted upward. Won't work.
L
woodchucker <[email protected]> fired this volley in news:-LCdnSlAEOPUd1
[email protected]:
> Why not?
>
Check the angle on the filler funnel. You cannot use it more tilted up
than just a little above horizontal. If the 'hopper' is even halfway
filled, it will spill out at horizontal, and empty itself completely when
the tip is tilted above horizontal.
Roses (and most plants) need to be dusted on the bottoms of the leaves as
well as the tops.
Not that... It's designed to be used vertically.
Lloyd
woodchucker <[email protected]> fired this volley in
news:[email protected]:
> there is a cap that would contain it.
Then how could it feed, with the tip above horizontal?
Lloyd
Rob H. <[email protected]> fired this volley in
news:[email protected]:
> Text on it reads "PAT. JUNE. 24 .29", but that's not a Tuesday, so
> either it's an incorrect date or not a U.S. patent. One of my friends
> did some research and reported: "That date was a valid patent date for
> Greece, England, Germany, France and Denmark. There were 262 patents
> issued on that date in those countries combined, and I looked at those
> from England with no obvious hits."
>
> The end of the plunger is tapered, a photo of it can be seen here:
>
> http://www.collectorsweekly.com/stories/126511-unknown-gun-powder-relod
> ing- funnel-t?in=1129
>
>
>
Rob, I don't like it for a powder loader, by virtue of the fact that it
has no means to limit the amount of the charge. Powder piston loaders
almost all have a means to meter out a fixed amount of powder per stroke.
That one seems to just admit powder more-or-less endlessly, without any
particular method of stopping it. The tip would ram it, but what would
stop the powder remaining in the tube from just 'drizzling out' when it
was removed from the sprue it was intended to fill?
No... being a pyro person, I'm not happy with that being _anything_ to
load powder into _anything_.
(could be wrong, though. wouldn't be the first time!)
LLoyd
On 7/13/2014 5:07 PM, Lloyd E. Sponenburgh wrote:
> woodchucker <[email protected]> fired this volley in
> news:[email protected]:
>
>> there is a cap that would contain it.
>
> Then how could it feed, with the tip above horizontal?
>
> Lloyd
>
There is a pump handle... it pumps probably a mixture of air and the
powder.
Whatever it is , it appears to be a pump for distributing a small (fine)
amount of particulate ..
--
Jeff
Rob H. wrote:
> I need some help with numbers 3231, 3233, and 3234 this week:
>
> http://55tools.blogspot.com/
>
> Larger images:
>
> http://imgur.com/gallery/lCR31/new
>
>
> Rob
>
3230 Never saw a milk container without a lid. Maybe for fueling
early autos.
3234 For giving medication to a small animal. The plunger is for a
pill or liquids could be poured into the funnel.
--
GW Ross
An unbreakable toy is useful for
breaking other toys.
On 7/10/2014 9:08 AM, shazzbat wrote:
>
>>
>> But surely 3230 is a bulk milk container, used for pouring into smaller
>> containers in the old days when milkmen didn't deliver one-quart glass
>> bottles? Watch me be wrong.
>>
>
> Third person to comment on this item. I'd make a
> guess, but don't want to milk it.
>
> Pull the udder one.
>
> Steve
>
>
You can cownt on me to kick the can down the road.
--
.
Christopher A. Young
Learn about Jesus
www.lds.org
.
On 7/10/2014 8:04 AM, Ted Schuerzinger wrote:
> On 10 Jul 2014 00:46:34 -0700, Rob H. wrote:
>
>> I need some help with numbers 3231, 3233, and 3234 this week:
>
> Sorry, but as always I'm lousy at these, and can't help with any of
> those.
>
> But surely 3230 is a bulk milk container, used for pouring into smaller
> containers in the old days when milkmen didn't deliver one-quart glass
> bottles? Watch me be wrong.
>
Third person to comment on this item. I'd make a
guess, but don't want to milk it.
--
.
Christopher A. Young
Learn about Jesus
www.lds.org
.
3230 - milk churn?
--
Mark Brader | The way the Giants are playing this season, Newton
Toronto | would have been better off standing on the wings
[email protected] | of the Cardinals. --Richard Tanzer
On 7/10/2014 4:47 PM, Rob H. wrote:
>
>>
>> 3231 Automatic brake adjustment lever that fits on the bottom between
>> the two brake shoes on the early to mid 70"s Chevrolet Vega and Monza,
>> Olds StafFire, Buick Skyhawk, and Pontiac Astre?
>>
>> Can't tell you how many of these I have replaced. Replacement was
>> necessary as the unit would not collapse when installing new brake
>> shoes, it would only expand with each application of the parking brake
>> lever. Actually there was a tool to collapse the internal "one way"
>> piece but the tool was more expensive than the part and therefore more
>> time consuming.
>
>
> I haven't found an exact match yet on the web but did find some similar shaped
> struts. Thanks
>
You may not find a match, it was unique to the a few GM vehicles in the
70's maybe into the early 80's. I looked at a few nation auto parts
store online catalogs and while the description was named no part was
available. The part actually mounted just under the wheel cylinder.
On 7/10/2014 3:46 AM, Rob H. wrote:
> I need some help with numbers 3231, 3233, and 3234 this week:
>
> http://55tools.blogspot.com/
>
> Larger images:
>
> http://imgur.com/gallery/lCR31/new
>
>
> Rob
>
Posting from my desk top PC in the living room, as always.
3229, tamping tool for a Jack and the Beanstalk
size tobacco pipe.
3230 milk can from a dairy.
3231, no clue.
3232, maybe for some kind of flower?
3233, no clue.
3234, would make a good seed planter.
--
.
Christopher A. Young
Learn about Jesus
www.lds.org
.
On 7/10/2014 5:43 PM, Rob H. wrote:
>> http://55tools.blogspot.com/
>>
>> Larger images:
>>
>> http://imgur.com/gallery/lCR31/new
>>
>>
>> 3230 is a six gallon jug. Probably for transferring milk to the urn.
>>
>> Steve
>
>
> I had a typo in my description which I changed earlier, it's actually a five
> gallon container. And after doing some searching, it looks like it was probably
> used for something other than milk.
>
You can't be milking this up.....
--
.
Christopher A. Young
Learn about Jesus
www.lds.org
.
"Rob H." wrote in message news:[email protected]...
I need some help with numbers 3231, 3233, and 3234 this week:
http://55tools.blogspot.com/
Larger images:
http://imgur.com/gallery/lCR31/new
3230 is a six gallon jug. Probably for transferring milk to the urn.
Steve
"Stormin Mormon" wrote in message news:[email protected]...
On 7/10/2014 8:04 AM, Ted Schuerzinger wrote:
> On 10 Jul 2014 00:46:34 -0700, Rob H. wrote:
>
>> I need some help with numbers 3231, 3233, and 3234 this week:
>
> Sorry, but as always I'm lousy at these, and can't help with any of
> those.
>
> But surely 3230 is a bulk milk container, used for pouring into smaller
> containers in the old days when milkmen didn't deliver one-quart glass
> bottles? Watch me be wrong.
>
Third person to comment on this item. I'd make a
guess, but don't want to milk it.
Pull the udder one.
Steve
"shazzbat" <[email protected]> wrote in message
news:<[email protected]>...
>
>
> "Stormin Mormon" wrote in message news:[email protected]...
> On 7/10/2014 8:04 AM, Ted Schuerzinger wrote:
> > On 10 Jul 2014 00:46:34 -0700, Rob H. wrote:
> >
> >> I need some help with numbers 3231, 3233, and 3234 this week:
> >
> > Sorry, but as always I'm lousy at these, and can't help with any of
> > those.
> >
> > But surely 3230 is a bulk milk container, used for pouring into smaller
> > containers in the old days when milkmen didn't deliver one-quart glass
> > bottles? Watch me be wrong.
> >
>
> Third person to comment on this item. I'd make a
> guess, but don't want to milk it.
>
> Pull the udder one.
>
I curd take a guess but I'd be whey off the mark.
--
David
Rob H. wrote:
> I need some help with numbers 3231, 3233, and 3234 this week:
>
> http://55tools.blogspot.com/
>
> Larger images:
>
> http://imgur.com/gallery/lCR31/new
>
>
> Rob
>
3229 -
3230 - Gas/Oil bucket
3231 - GM H platform (Vega, Astre, Monza etc.) rear brake adjuster strut.
3232 -
3234 - bolus tool?
--
Steve W.
On 7/10/2014 2:46 AM, Rob H. wrote:
> I need some help with numbers 3231, 3233, and 3234 this week:
>
> http://55tools.blogspot.com/
>
> Larger images:
>
> http://imgur.com/gallery/lCR31/new
>
>
> Rob
>
3230 Cream can
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
shazzbat wrote:
> "Stormin Mormon" wrote in message news:[email protected]...
>
> On 7/10/2014 8:04 AM, Ted Schuerzinger wrote:
>> On 10 Jul 2014 00:46:34 -0700, Rob H. wrote:
>>
>>> I need some help with numbers 3231, 3233, and 3234 this week:
>>
>> Sorry, but as always I'm lousy at these, and can't help with any of
>> those.
>>
>> But surely 3230 is a bulk milk container, used for pouring into
>> smaller containers in the old days when milkmen didn't deliver
>> one-quart glass bottles? Watch me be wrong.
>>
>
> Third person to comment on this item. I'd make a
> guess, but don't want to milk it.
>
> Pull the udder one.
>
Oh... bull shit...
--
-Mike-
[email protected]
>http://55tools.blogspot.com/
>
>Larger images:
>
>http://imgur.com/gallery/lCR31/new
>
>
>3230 is a six gallon jug. Probably for transferring milk to the urn.
>
>Steve
I had a typo in my description which I changed earlier, it's actually a five
gallon container. And after doing some searching, it looks like it was probably
used for something other than milk.
>
>3231 Automatic brake adjustment lever that fits on the bottom between
>the two brake shoes on the early to mid 70"s Chevrolet Vega and Monza,
>Olds StafFire, Buick Skyhawk, and Pontiac Astre?
>
>Can't tell you how many of these I have replaced. Replacement was
>necessary as the unit would not collapse when installing new brake
>shoes, it would only expand with each application of the parking brake
>lever. Actually there was a tool to collapse the internal "one way"
>piece but the tool was more expensive than the part and therefore more
>time consuming.
I haven't found an exact match yet on the web but did find some similar shaped
struts. Thanks
>
>3230 - Gas/Oil bucket
I think this is probably correct, the closest that I could find online are the
cans on this page:
http://www.ebay.com/sch/sis.html?
_nkw=Vintage%20Ellisco%205%20Gallon%20Geo%20D%20Ellis%20Sons%20Gas%20Cans&_itemI
d=350399304515
>3231 - GM H platform (Vega, Astre, Monza etc.) rear brake adjuster strut.
I'll take yours and Leon's word on this one.
>3234 - bolus tool?
Sounds possible, I'm still not sure about this item.
"Ted Schuerzinger" wrote in message
news:[email protected]...
On Thu, 10 Jul 2014 12:49:58 -0400, Mike Marlow wrote:
> Oh... bull shit...
That's some bull that gives milk. ;
I saw a maid milk a bull, fie, man, fie
I saw a maid milk a bull, who's the fool now
I saw a maid milk a bull, at every pull a bucket full
Thou hast well drunken, man, who's the fool now
A few lines from Martin said to his man, an old English folk song.
Steve
Rob H. :
> I need some help with numbers 3231, 3233, and 3234 this week:
>
> http://55tools.blogspot.com/
>
> Larger images:
>
> http://imgur.com/gallery/lCR31/new
>
>
3232 - I'd _guess_ some sort of fruit pitting tool - perhaps peaches,
plums/prunes, or the like. I think it's too small for Avacados.
--
-----------------------------------------------------
Free Software - Baxter Codeworks www.baxcode.com
-----------------------------------------------------
Rob H. wrote:
>> 3230 - Gas/Oil bucket
>
>
> I think this is probably correct, the closest that I could find online are the
> cans on this page:
>
> http://www.ebay.com/sch/sis.html?
> _nkw=Vintage%20Ellisco%205%20Gallon%20Geo%20D%20Ellis%20Sons%20Gas%20Cans&_itemI
> d=350399304515
>
>
>> 3231 - GM H platform (Vega, Astre, Monza etc.) rear brake adjuster strut.
>
>
> I'll take yours and Leon's word on this one.
Changed a bunch of them myself. They "worked" but getting them to
retract when they rusted was almost impossible.
Here is a mitchell page showing them.
http://vintage.mitchell1.com/PClubData/chassis/dch73/V2D738081.pdf
>
>
>> 3234 - bolus tool?
>
>
> Sounds possible, I'm still not sure about this item.
>
--
Steve W.
In rec.puzzles G. Ross <[email protected]> wrote:
> 3230 Never saw a milk container without a lid. Maybe for fueling
> early autos.
Yeah, I kind of agree with this comment, I don't think it's for milk.
Long, long, long time ago an aunt had a dairy farm up in Wisconsin and
besides a lid (needed to keep the flies out), the handle for them were on
either side of the opening, two, not one across like the one in the picture.
-bruce
[email protected]
>>> 3231 - GM H platform (Vega, Astre, Monza etc.) rear brake adjuster strut.
>>
>>
>> I'll take yours and Leon's word on this one.
>
>Changed a bunch of them myself. They "worked" but getting them to
>retract when they rusted was almost impossible.
>
>Here is a mitchell page showing them.
>
>http://vintage.mitchell1.com/PClubData/chassis/dch73/V2D738081.pdf
Thanks! That really nails this one down, I'll send your link to the owner.
Still no solid answers for the last two in this set but the rest have been
posted:
http://55tools.blogspot.com/2014/07/set-553.html#answers
Rob
Rob H. wrote:
>>>> 3231 - GM H platform (Vega, Astre, Monza etc.) rear brake adjuster strut.
>>>
>>> I'll take yours and Leon's word on this one.
>> Changed a bunch of them myself. They "worked" but getting them to
>> retract when they rusted was almost impossible.
>>
>> Here is a mitchell page showing them.
>>
>> http://vintage.mitchell1.com/PClubData/chassis/dch73/V2D738081.pdf
>
>
>
> Thanks! That really nails this one down, I'll send your link to the owner.
>
> Still no solid answers for the last two in this set but the rest have been
> posted:
>
> http://55tools.blogspot.com/2014/07/set-553.html#answers
>
>
> Rob
>
Tell the owner of 3231 that if they have no use for it (or any others
they have or Vega parts in general) to go to http://forums.h-body.org/
and mention that they have them.
They are VERY RARE parts and are wanted by folks who restore the cars.
--
Steve W.
>Tell the owner of 3231 that if they have no use for it (or any others
>they have or Vega parts in general) to go to http://forums.h-body.org/
>and mention that they have them.
>
>They are VERY RARE parts and are wanted by folks who restore the cars.
Ok, I'll definitely mention this to him, I'm almost certain he doesn't have a
use
for it.
In article <130720142148013621%[email protected]>, Joe Gwinn says...
>
>In article <[email protected]>, Lloyd
>E. Sponenburgh wrote:
>
>> woodchucker <[email protected]> fired this volley in
>> news:[email protected]:
>>
>> > there is a cap that would contain it.
>>
>> Then how could it feed, with the tip above horizontal?
>
>Maybe it's for loading fireworks.
>
>
>Joe Gwinn
Text on it reads "PAT. JUNE. 24 .29", but that's not a Tuesday, so either it's
an incorrect date or not a U.S. patent. One of my friends did some research and
reported: "That date was a valid patent date for Greece, England, Germany,
France and Denmark. There were 262 patents issued on that date in those
countries combined, and I looked at those from England with no obvious hits."
The end of the plunger is tapered, a photo of it can be seen here:
http://www.collectorsweekly.com/stories/126511-unknown-gun-powder-reloding-
funnel-t?in=1129
>Rob, I don't like it for a powder loader, by virtue of the fact that it
>has no means to limit the amount of the charge. Powder piston loaders
>almost all have a means to meter out a fixed amount of powder per stroke.
>
>That one seems to just admit powder more-or-less endlessly, without any
>particular method of stopping it. The tip would ram it, but what would
>stop the powder remaining in the tube from just 'drizzling out' when it
>was removed from the sprue it was intended to fill?
>
>No... being a pyro person, I'm not happy with that being _anything_ to
>load powder into _anything_.
> (could be wrong, though. wouldn't be the first time!)
>
>LLoyd
I agree that it's unlikely to be a powder loader, looks like this one will
remain
unsolved for a while.
"Stormin Mormon" <[email protected]> wrote in message
news:<[email protected]>...
> On 7/13/2014 7:49 AM, Stormin Mormon wrote:
> >
> > Sunday AM, and no answers yet? I keep looking for
> > answers in the subject line.
> >
> >
> I went back and read the posts I have for this
> group, and didn't find the answers any where.
>
Not this again!!!
I just had a look and found them in about 20 seconds.
For future reference they are always half way down the same page (or just
add #answers to the URL)
--
David
Markem wrote:
> On Thu, 17 Jul 2014 07:21:15 -0400, Stormin Mormon
> <[email protected]> wrote:
>
>> On 7/13/2014 7:49 AM, Stormin Mormon wrote:
>>> Sunday AM, and no answers yet? I keep looking for
>>> answers in the subject line.
>>>
>>>
>> I went back and read the posts I have for this
>> group, and didn't find the answers any where.
>
> Guess you will remain ignorant
Don't feed the troll....
--
Steve W.
On Thu, 17 Jul 2014 07:21:15 -0400, Stormin Mormon
<[email protected]> wrote:
>On 7/13/2014 7:49 AM, Stormin Mormon wrote:
>>
>> Sunday AM, and no answers yet? I keep looking for
>> answers in the subject line.
>>
>>
>I went back and read the posts I have for this
>group, and didn't find the answers any where.
Guess you will remain ignorant