My dads put together an Oak cross for a grave marker.Thing is, we can't
decide on what to coat it with. It wants to be low maintainance, as the
person who its for (not the one thats been buried, before the pedantic
types say anything :) ) won't want to be giving it a lick of varnish
every year. Whenever I've tried anything recommended by local stores
I've always been disappointed. Some varnishes have had a tint to them,
and spoilt the look of the wood, others started to peel after year or so.
Would linseed oil be any good? I've used it on an oak door many moons
ago, but that wasn't in direct sunlight and fairly sheltered.
TIA
--
scrum
On 13 May, 21:52, scrumble <[email protected]> wrote:
> My dads put together an Oak cross for a grave marker.Thing is, we can't
> decide on what to coat it with.
I'd probably put copper or zinc sheathing caps over the end grain, and
the post end of it would be slathered with epoxy (or hot bitumen). I
presume the joinery is a half-lap, so you should make sure the end-
grain of that joint is also well sealed. Good sharp cuts and well-
pared end-grain helps too.
That, and making it out of chestnut rather than oak.
If you can keep oak dry, then it's good for a thousand years
(literally - look at timber-framed buildings). Even if it gets wet, so
long as it dries out afterwards you're OK. If you let moisture soak
into the ennd grain and sit there, then 5 years tops.
scrumble wrote:
> My dads put together an Oak cross for a grave marker.Thing is, we can't
> decide on what to coat it with. It wants to be low maintainance, as the
> person who its for (not the one thats been buried, before the pedantic
> types say anything :) ) won't want to be giving it a lick of varnish
> every year. Whenever I've tried anything recommended by local stores
> I've always been disappointed. Some varnishes have had a tint to them,
> and spoilt the look of the wood, others started to peel after year or so.
>
> Would linseed oil be any good? I've used it on an oak door many moons
> ago, but that wasn't in direct sunlight and fairly sheltered.
>
> TIA
>
> --
> scrum
The linseed oil (or any drying oil) would have to occasionally be reapplied.
As would varnish, shellac or any tradional finish. If you want the longest
space between origional application and reapplying, go with an exterior poly
or an exterior (marine) epoxy.
ron
If it was me, I'd put several coats of clear outdoor polyurethane on it and
call it good.
"scrumble" <[email protected]> wrote in message
news:[email protected]...
> My dads put together an Oak cross for a grave marker.Thing is, we can't
> decide on what to coat it with. It wants to be low maintainance, as the
> person who its for (not the one thats been buried, before the pedantic
> types say anything :) ) won't want to be giving it a lick of varnish every
> year. Whenever I've tried anything recommended by local stores I've always
> been disappointed. Some varnishes have had a tint to them, and spoilt the
> look of the wood, others started to peel after year or so.
>
> Would linseed oil be any good? I've used it on an oak door many moons ago,
> but that wasn't in direct sunlight and fairly sheltered.
>
> TIA
>
> --
> scrum
"scrumble" <[email protected]> wrote in message
news:[email protected]...
> My dads put together an Oak cross for a grave marker.Thing is, we can't
> decide on what to coat it with. It wants to be low maintainance, as the
> person who its for (not the one thats been buried, before the pedantic
> types say anything :) ) won't want to be giving it a lick of varnish every
> year. Whenever I've tried anything recommended by local stores I've always
> been disappointed. Some varnishes have had a tint to them, and spoilt the
> look of the wood, others started to peel after year or so.
>
> Would linseed oil be any good? I've used it on an oak door many moons ago,
> but that wasn't in direct sunlight and fairly sheltered.
>
Make sure you use white oak rather than red. It is much more weather
resistant.
No finish will hold up. I would be inclined to leave it unfinished.
"scrumble" wrote:
> My dads put together an Oak cross for a grave marker.Thing is, we
can't
> decide on what to coat it with. It wants to be low maintainance, as
the
> person who its for (not the one thats been buried, before the pedantic
> types say anything :) ) won't want to be giving it a lick of
varnish every
> year.
<snip>
You can't get there from here.
If it's wood, it requires maintenance.
Even with good maintenance, it will steadily march toward compost.
Lew