I had a jig that I made long ago for doing template bandsawing. I think
I got it off Dukinski's band saw book. Was always ok, nothing fantastic.
A couple of years ago I needed extra stuff from Rockler to get free
shipping. Well I forgot about it, and was setting up to do a bunch of
blanks, when I saw it sitting in my tray.
I had to make some washers to avoid the blade, I used a 1/4" blade and
it would have cut into it.
Anyway, it worked great. Got a nice roughing, and then put it on the
router table and using a pattern bit was able to do finishing cuts.
It was band saw duplicating pin Item # 3572.. I notice it's not online
anylonger.. Not sure why, but it works well.
--
Jeff
On 12/10/2016 5:34 PM, woodchucker wrote:
> I had a jig that I made long ago for doing template bandsawing. I think
> I got it off Dukinski's band saw book. Was always ok, nothing fantastic.
>
> A couple of years ago I needed extra stuff from Rockler to get free
> shipping. Well I forgot about it, and was setting up to do a bunch of
> blanks, when I saw it sitting in my tray.
>
> I had to make some washers to avoid the blade, I used a 1/4" blade and
> it would have cut into it.
>
> Anyway, it worked great. Got a nice roughing, and then put it on the
> router table and using a pattern bit was able to do finishing cuts.
>
> It was band saw duplicating pin Item # 3572.. I notice it's not online
> anylonger.. Not sure why, but it works well.
Item # 35762
--
Jeff