RH

Rob H.

10/10/2013 1:26 AM

What is it? Set 514

This week's set has been posted:

http://55tools.blogspot.com/


Rob


This topic has 33 replies

LH

"Lew Hodgett"

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 2:02 AM


"Rob H." wrote:

> This week's set has been posted:
>
> http://55tools.blogspot.com/

2998:

A coca cola dispenser for 6-1/2 oz glass bottles.

Lew


LH

"Lew Hodgett"

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 1:31 PM


"Lloyd E. Sponenburgh" wrote:

> Yeah... but THAT one was clearly a Coke machine.
<snip>
> Mine was a dime machine. It took two nickels or one dime; no larger
> or
> smaller denominations were accepted, because they had no
> change-makers
> that early.

--------------------------------------------------------------
How did they go about rejecting slugs while accepting coins?

Lew

LH

"Lew Hodgett"

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 5:35 PM


>>> 2297 An aerodynamic pod for a rotating direction finding antenna
>>> for
>>> an airplane
-------------------------------------------
"John" wrote:

> This is right, text on the base said "radio compass antenna"
>
> It is the direction finding antenna from an ARN -6 low frequency
> ADF system. I worked on many of them.

-------------------------------------------------
Was this used as part of the "omni" navigation network in use back in
the '60's?

Had an "omni" beacon with in 100 yds of my boat in the 1980 time
frame.

Lew

wn

woodchucker

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 7:57 PM

On 10/10/2013 5:02 AM, Lew Hodgett wrote:
> "Rob H." wrote:
>
>> This week's set has been posted:
>>
>> http://55tools.blogspot.com/
>
> 2998:
>
> A coca cola dispenser for 6-1/2 oz glass bottles.
>
> Lew
>
>
>

Agreed an old coke dispenser The bottles were in the cylinder which
rotates up to drop a bottle after you pressed the lever, after you put
your nickel in.

Looks like it belongs in a large turret type gun.

2999 looks like a removeable handle for a pot pull the item to lock it
on temporarily until released.
Or looks like there might be a point on that handle, which might be for
old oil cans... (can't get photobucke to respond, it just spins so can't
see the enlarged image)

2997 Either from an airplane the electronics antenna or from a boat as
a outrigger with balast (doubtful but still might be).







--
Jeff

js

jim <"sjedgingN0Sp"@[email protected]>

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 2:22 PM



"Rob H." wrote:
>
> >2998:
> >
> >A coca cola dispenser for 6-1/2 oz glass bottles.
> >
> >Lew
>
> Correct

Apparently this vending machine was made by a company
named Vendorlator and not all were Coke machines.

http://www.vintagevending.com/pepsi-cola-vendorlator-27

GA

Gunner Asch

in reply to Rob H. on 10/10/2013 1:26 AM

12/10/2013 4:48 PM

On Sat, 12 Oct 2013 15:17:43 -0500, "Lloyd E. Sponenburgh"
<lloydspinsidemindspring.com> wrote:

>Gunner Asch <[email protected]> fired this volley in
>news:[email protected]:
>
>> Been there..done that. Broke ratios didnt we?
>
>Thankfully!
>Lloyd

Hear hear! Though a couple times...shrug


"The socialist movement takes great pains to circulate frequently new labels for its ideally constructed state.
Each worn-out label is replaced by another which raises hopes of an ultimate solution of the insoluble basic
problem of Socialism, until it becomes obvious that nothing has been changed but the name.
The most recent slogan is "State Capitalism."[Fascism] It is not commonly realized that this covers nothing more
than what used to be called Planned Economy and State Socialism, and that State Capitalism, Planned Economy,
and State Socialism diverge only in non-essentials from the "classic" ideal of egalitarian Socialism. - Ludwig von Mises (1922)

Ja

John

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 8:14 PM

Rob H. wrote:
>>> http://55tools.blogspot.com/
>
>>>
>> 2296 A drying stretcher for (fur) skins.
>
>
> Correct, it's for muskrat hides
>
>
>> 2297 An aerodynamic pod for a rotating direction finding antenna for
>> an airplane
>
>
> This is right, text on the base said "radio compass antenna"

It is the direction finding antenna from an ARN -6 low frequency ADF
system. I worked on many of them.

John

Rr

"RogerN"

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 12:45 PM

"Stormin Mormon" wrote in message news:[email protected]...

>On 10/10/2013 4:26 AM, Rob H. wrote:
>> This week's set has been posted:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
<snip>
>
>2997, prototype of the dirigible Hindenberg. This
>lead filled model was less successful than the
>hydrogen model.

Are you sure the Hindenburg was more successful than the Lead Zeppelin? :-)

RogerN

Ja

John

in reply to Rob H. on 10/10/2013 1:26 AM

11/10/2013 2:08 AM

Lew Hodgett wrote:
>>>> 2297 An aerodynamic pod for a rotating direction finding antenna
>>>> for
>>>> an airplane
> -------------------------------------------
> "John" wrote:
>
>> This is right, text on the base said "radio compass antenna"
>>
>> It is the direction finding antenna from an ARN -6 low frequency
>> ADF system. I worked on many of them.
>
> -------------------------------------------------
> Was this used as part of the "omni" navigation network in use back in
> the '60's?
>
> Had an "omni" beacon with in 100 yds of my boat in the 1980 time
> frame.
>
> Lew
>
> The station you are refering to is a vor Tac station. The aircraft equipment used this station.
The nav unit was the ARN 14 for the vhf vor system. The military
system was the Tacan system also included in most navigation ground
stations. This system gave distance as well as bearing information.
The vor system also had a Distance Measuring Equipment DME which for
civilian use gave the distance to the station from the aircraft.

The ARN 6 was a low frequency direction finding unit. It would home in
on any radio broadcast signal. The antenna had a goniometer which was
a rotation ferite antenna and a long wire sense antenna. the goniometer
was servoed with information from the two detected signals. The ferite
antenna would seek a null signal and the indicator in the panel would
indicate the direction of the station.

John




















LE

"Lloyd E. Sponenburgh"

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 8:03 AM

Rob H. wrote:
>> This week's set has been posted:
>>
>> http://55tools.blogspot.com/

2995 "fusible" safety plug for a steam boiler
2996 does kind of look like a hide stretcher, but it could also be for
keeping a gunny-sack open while filling
2997 balasting keel weight for a sail boat
2998 a 24-bottle coke machine
2999 ???
3000 a settable gauge for marking out timber framing cuts?

LLoyd

LE

"Lloyd E. Sponenburgh"

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 2:39 PM

jim <"sjedgingN0Sp"@[email protected]> fired this volley in
news:[email protected]:

> Apparently this vending machine was made by a company
> named Vendorlator and not all were Coke machines.

Yeah... but THAT one was clearly a Coke machine.

In my errant youth (at age 14), I rescued from the dump a larger version
of that same machine that would serve up something like 60-70 (IIRC)
bottles of the 6-1/2oz or 7oz bottles. It even had a refrigerated water
fountain on the side.

It used a ratchet mechanism to drive a delivery drum a small fraction of
a rotation. The bottles were in staggered lines radiating from the
center of the drum, such that one bottle would come into alignment with a
multi-hole 'dispensing gate', arranged so that only the one bottle that
was perfectly aligned could be extracted from the hole. The others were
visible in the gate, but wouldn't come out. You could NOT purposely jam
the machine by partially extracting a 'trapped' bottle and not pushing it
back in, because the only bottle that would partially extract was always
the next one to be delivered.

Mine was a dime machine. It took two nickels or one dime; no larger or
smaller denominations were accepted, because they had no change-makers
that early.

Lloyd

LE

"Lloyd E. Sponenburgh"

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 5:24 PM

"Lew Hodgett" <[email protected]> fired this volley in news:52570e90$0
[email protected]:

> How did they go about rejecting slugs while accepting coins?

By then they had a magnetic rejector mechanism that would catch steel
slugs, along with thickness and diameter gates (natch), and a "bounce pad"
for the dimes or nickels (one for each) that relied upon the specific
elasticity of the coins to ensure they leapt just the right distance off
the bounce pad into their appropriate slots.

They weren't as sophisticated as todays coin rejectors, but pretty
reliable.


Lloyd

LE

"Lloyd E. Sponenburgh"

in reply to Rob H. on 10/10/2013 1:26 AM

12/10/2013 7:15 AM

Gunner Asch <[email protected]> fired this volley in
news:[email protected]:

>
> Still have it? They are worth some serious money to collectors these
> days.
>

nah... got rid of it before I went to 'Nam, along with a number of things I
figured I'd never get to use again... <duh!>

Lloyd

LE

"Lloyd E. Sponenburgh"

in reply to Rob H. on 10/10/2013 1:26 AM

12/10/2013 3:17 PM

Gunner Asch <[email protected]> fired this volley in
news:[email protected]:

> Been there..done that. Broke ratios didnt we?

Thankfully!
Lloyd

ww

wb8nbs

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 7:41 PM

On Thursday, October 10, 2013 7:35:03 PM UTC-5, Lew Hodgett wrote:
> >>> 2297 An aerodynamic pod for a rotating direction finding antenna
> >>> for
> >>> an airplane
> -------------------------------------------
>=20
> "John" wrote:
>=20
> > This is right, text on the base said "radio compass antenna"
> > It is the direction finding antenna from an ARN -6 low frequency=20
> > ADF system. I worked on many of them.
> -------------------------------------------------
>=20
> Was this used as part of the "omni" navigation network in use back in=20
> the '60's?
>=20
> Had an "omni" beacon with in 100 yds of my boat in the 1980 time=20
> frame.
>=20
> Lew

ARN-6 was a fairly simple radio receiver broadcast band and below IIRC. The=
re was a second "sense" antenna that nulled out the ambiguous readings give=
n by the rotating loop antenna. I worked on them too, but there was only on=
e on the base I was stationed. It had nothing to do with "Omni". (VOR, Vis=
ual Omni Range)

SM

Stormin Mormon

in reply to Rob H. on 10/10/2013 1:26 AM

11/10/2013 6:16 PM

On 10/11/2013 5:46 PM, Rob H. wrote:
>
>
> Thanks, that's a good photo, I just added a link to it on the site.
>
> The answers for this week have been posted, along with an update on the saw from
> a
> few weeks ago:
>
> http://55tools.blogspot.com/2013/10/set-514.html#answers
>

Every week, I look for the answers post.
I recognize it cause Rob puts "answers" in
the subject line. I keep looking.

.
Christopher A. Young
Learn about Jesus
www.lds.org
.

SM

Stormin Mormon

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 8:56 AM

On 10/10/2013 4:26 AM, Rob H. wrote:
> This week's set has been posted:
>
> http://55tools.blogspot.com/
>
>
> Rob
>

Posting from my desk top PC in the living room,
as always.

2995, first thought is oil drain plug with magnet.
Second thought is burner orifice from an ocean
going steamer.

2996, when misbehaved carpentry students are made
to sit in the corner, they must wear this.

2997, prototype of the dirigible Hindenberg. This
lead filled model was less successful than the
hydrogen model.

2998, possibly an early ending machine, but for
what products, no clue.

2999, cracking walnuts, and crimping wire lugs.

3000, part of a carpenter's measuring device.
The offset wobbler and shimmy shaft are missing.

Good one, Rob. You got me on all of them. No clue.


--
.
Christopher A. Young
Learn about Jesus
www.lds.org
.

SM

Stormin Mormon

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 3:28 PM

On 10/10/2013 1:45 PM, RogerN wrote:
>>>
>>> http://55tools.blogspot.com/
>>>
>> 2997, prototype of the dirigible Hindenberg. This
>> lead filled model was less successful than the
>> hydrogen model.
>
> Are you sure the Hindenburg was more successful than the Lead Zeppelin? :-)
>
> RogerN

Yeah, Lead Zepplin never got off the ground.

At least, I zink not!

http://hogansheroesfanclub.com/images/tvGuide06may1967p16SchultzPictureLarge.jpg


.
Christopher A. Young
Learn about Jesus
www.lds.org
.

GA

Gunner Asch

in reply to Rob H. on 10/10/2013 1:26 AM

12/10/2013 10:12 AM

On Sat, 12 Oct 2013 07:15:46 -0500, "Lloyd E. Sponenburgh"
<lloydspinsidemindspring.com> wrote:

>Gunner Asch <[email protected]> fired this volley in
>news:[email protected]:
>
>>
>> Still have it? They are worth some serious money to collectors these
>> days.
>>
>
>nah... got rid of it before I went to 'Nam, along with a number of things I
>figured I'd never get to use again... <duh!>
>
>Lloyd

Been there..done that. Broke ratios didnt we?

(VBG)


"The socialist movement takes great pains to circulate frequently new labels for its ideally constructed state.
Each worn-out label is replaced by another which raises hopes of an ultimate solution of the insoluble basic
problem of Socialism, until it becomes obvious that nothing has been changed but the name.
The most recent slogan is "State Capitalism."[Fascism] It is not commonly realized that this covers nothing more
than what used to be called Planned Economy and State Socialism, and that State Capitalism, Planned Economy,
and State Socialism diverge only in non-essentials from the "classic" ideal of egalitarian Socialism. - Ludwig von Mises (1922)

RH

Rob H.

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 2:17 AM

In article <[email protected]>, Rob H. says...
>
>This week's set has been posted:
>
>http://55tools.blogspot.com/


I forgot to post the larger images:

http://imgur.com/a/9Dl7h

AT

Alexander Thesoso

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 6:19 AM

2995 Fusible safety valve plug. When the contents of some container
get too hot the white stuff melts and releases pressure.

2997 Sonar pod. Absolutely no idea of from what or when.

2999 Can piercer, spout former. Push in at the edge of a can, the
press the lever to make a V-shaped spout in the side of the can.




On 10/10/2013 4:26 AM, Rob H. wrote:
> This week's set has been posted:

RH

Rob H.

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 10:20 AM


>2998:
>
>A coca cola dispenser for 6-1/2 oz glass bottles.
>
>Lew



Correct

RH

Rob H.

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 10:23 AM

>2995 Fusible safety valve plug. When the contents of some container
>get too hot the white stuff melts and releases pressure.


Yes


>2999 Can piercer, spout former. Push in at the edge of a can, the
>press the lever to make a V-shaped spout in the side of the can.


Good answer, wasn't sure if anybody would get this one.

RH

Rob H.

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 10:40 AM


>> http://55tools.blogspot.com/

>>
>2296 A drying stretcher for (fur) skins.


Correct, it's for muskrat hides


>2297 An aerodynamic pod for a rotating direction finding antenna for
>an airplane


This is right, text on the base said "radio compass antenna"


>2298 A Coke machine back when they were 5 cents.


Yep, it says 5 cents on the front


>2299 (1) A staple remover (2) A handy object to throw at salesmen.
>

RH

Rob H.

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 10:50 AM

>2998 a 24-bottle coke machine


Coke machine is correct but it's for 27 bottles



>3000 a settable gauge for marking out timber framing cuts?


You're right about it being a marker for wood but it isn't for timber framing.

AT

Alexander Thesoso

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 6:10 PM

> --------------------------------------------------------------
> How did they go about rejecting slugs while accepting coins?
>
> Lew

Not answering your question, but... You have triggered a childhood
memory...
Once upon a time, in New York City, the IRT subway (privately owned) had
turnstiles. They had four (heavy solid) wooden blades on a vertical
axis. The coin slot, about 4 feet above the ground, took a nickle for a
ride. The coin dropped a short way, triggered the turnstile, and
stopped in front of a lightbulb and a 4-inch diameter plano-convex lens
that magnified the image so the attendant in the change booth could see
that the coin wasn't a slug.
Then the city took over the subways and improved things, getting rid of
the nickle fare.

SW

"Steve W."

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 7:04 PM

Stormin Mormon wrote:
> On 10/10/2013 1:45 PM, RogerN wrote:
>>>> http://55tools.blogspot.com/
>>>>
>>> 2997, prototype of the dirigible Hindenberg. This
>>> lead filled model was less successful than the
>>> hydrogen model.
>> Are you sure the Hindenburg was more successful than the Lead Zeppelin? :-)
>>
>> RogerN
>
> Yeah, Lead Zepplin never got off the ground.
>
> At least, I zink not!
>
> http://hogansheroesfanclub.com/images/tvGuide06may1967p16SchultzPictureLarge.jpg
>
>
> .
> Christopher A. Young
> Learn about Jesus
> www.lds.org
> .

Try this instead -

http://en.wikipedia.org/wiki/Led_Zeppelin

--
Steve W.

RH

Rob H.

in reply to Rob H. on 10/10/2013 1:26 AM

11/10/2013 2:46 PM


>EDIT: Here's another on, this one mounted dorsally on what I think is a Lo=
>ckheed Ventura anti-submarine patrol bomber
>
>http://www.twinbeech.com/images/Aircraft/manufacturers/lockheed/PV-2/PV-2D8=
>4062/mx/4-16-11/DSC03827web.jpg


Thanks, that's a good photo, I just added a link to it on the site.

The answers for this week have been posted, along with an update on the saw from
a
few weeks ago:

http://55tools.blogspot.com/2013/10/set-514.html#answers

RH

Rob H.

in reply to Rob H. on 10/10/2013 1:26 AM

11/10/2013 2:53 PM

>2998) It vaguely looks like a Coca-Cola bottle vending machine,
> except that I would expect the output side to be on the bottom,
> not the top.
>
> But I don't see a power cord to keep the bottles cold. (Perhaps
> a lack of the proper angle of view. :-)


I'm guessing it was coiled up on the back, but I didn't take the time to look
that close.


> At least some kind of vending machine, with the lever, the coin
> slot, and the coin return slot on the right.
>
> Does the presence of the fire extinguisher have any
> significance?


I took the photo in a second-hand store, there was lots of stuff piled
everywhere, so there isn't any real significance. BTW, I like the interior shot
that I found on the web better than the external one and probably would have
used it as the puzzle had I found it before I posted yesterday morning.


>
> And it seems to be in a church, based on what looks like a
> stained-glass window behind it. :-)

RH

Rob H.

in reply to Rob H. on 10/10/2013 1:26 AM

12/10/2013 3:10 PM


>Every week, I look for the answers post.
>I recognize it cause Rob puts "answers" in
>the subject line. I keep looking.


Ok, I'll put answers in the subject line next week.

DN

"DoN. Nichols"

in reply to Rob H. on 10/10/2013 1:26 AM

11/10/2013 4:48 AM

On 2013-10-10, Rob H <[email protected]> wrote:
> This week's set has been posted:
>
> http://55tools.blogspot.com/

The usual posting from Rec.crafts.metalworking -- where do the
rest of you post from (which newsgroup, not where are you sitting. :-)

2995) Looks to me like a fuseable plug -- in a boiler or something
similar -- designed for the pink stuff to melt and blow out when
the temperature and pressure get too high.

2996) For supporting something printed on paper -- not quite stiff
enough to be cardboard. Perhaps music at an organ, or something
similar - except it is not clear how it mounts to what from just
the single view.

2997) Streamlined housing for an antenna (fairly high frequency) on
an aircraft. Not metal -- probably some fiberglass or plastic
selected to be transparent to the frequency of RF involved.

2998) It vaguely looks like a Coca-Cola bottle vending machine,
except that I would expect the output side to be on the bottom,
not the top.

But I don't see a power cord to keep the bottles cold. (Perhaps
a lack of the proper angle of view. :-)

At least some kind of vending machine, with the lever, the coin
slot, and the coin return slot on the right.

Does the presence of the fire extinguisher have any
significance?

And it seems to be in a church, based on what looks like a
stained-glass window behind it. :-)

2999) Different possibilities:

1 -- stapler and staple remover

2 -- Oil can opener and pouring spout.

3 -- something which I have missed totally.

3000) Looks like some kind of woodworking tool -- *made* by a good
woodworker. But what its precise function is I'm not sure.

Now to post and then see what others have suggested.

Enjoy,
DoN.

--
Remove oil spill source from e-mail
Email: <[email protected]> | (KV4PH) Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

GR

"G. Ross"

in reply to Rob H. on 10/10/2013 1:26 AM

10/10/2013 8:50 AM

Rob H. wrote:
> This week's set has been posted:
>
> http://55tools.blogspot.com/
>
>
> Rob
>
2296 A drying stretcher for (fur) skins.

2297 An aerodynamic pod for a rotating direction finding antenna for
an airplane

2298 A Coke machine back when they were 5 cents.

2299 (1) A staple remover (2) A handy object to throw at salesmen.

--
 GW Ross 

 Support your local medical examiner 
 -- die strangely. 





GA

Gunner Asch

in reply to Rob H. on 10/10/2013 1:26 AM

12/10/2013 1:03 AM

On Thu, 10 Oct 2013 14:39:44 -0500, "Lloyd E. Sponenburgh"
<lloydspinsidemindspring.com> wrote:

>jim <"sjedgingN0Sp"@[email protected]> fired this volley in
>news:[email protected]:
>
>> Apparently this vending machine was made by a company
>> named Vendorlator and not all were Coke machines.
>
>Yeah... but THAT one was clearly a Coke machine.
>
>In my errant youth (at age 14), I rescued from the dump a larger version
>of that same machine that would serve up something like 60-70 (IIRC)
>bottles of the 6-1/2oz or 7oz bottles. It even had a refrigerated water
>fountain on the side.
>
>It used a ratchet mechanism to drive a delivery drum a small fraction of
>a rotation. The bottles were in staggered lines radiating from the
>center of the drum, such that one bottle would come into alignment with a
>multi-hole 'dispensing gate', arranged so that only the one bottle that
>was perfectly aligned could be extracted from the hole. The others were
>visible in the gate, but wouldn't come out. You could NOT purposely jam
>the machine by partially extracting a 'trapped' bottle and not pushing it
>back in, because the only bottle that would partially extract was always
>the next one to be delivered.
>
>Mine was a dime machine. It took two nickels or one dime; no larger or
>smaller denominations were accepted, because they had no change-makers
>that early.
>
>Lloyd

Still have it? They are worth some serious money to collectors these
days.


"The socialist movement takes great pains to circulate frequently new labels for its ideally constructed state.
Each worn-out label is replaced by another which raises hopes of an ultimate solution of the insoluble basic
problem of Socialism, until it becomes obvious that nothing has been changed but the name.
The most recent slogan is "State Capitalism."[Fascism] It is not commonly realized that this covers nothing more
than what used to be called Planned Economy and State Socialism, and that State Capitalism, Planned Economy,
and State Socialism diverge only in non-essentials from the "classic" ideal of egalitarian Socialism. - Ludwig von Mises (1922)


You’ve reached the end of replies