Hello,
I have an issue with my DW735. Basically, the rollers do not grab the wood
enough to pull it through the cutters, even with a light cut.
I think that the oil that was in the Jatoba I worked on earlier (lots of ft²
for flooring) ended up on the rollers and is causing them to slip...
Do you think that this is the likely reason?
how do I fix the problem?
thanks, cyrille
"Doug Miller" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>, "Cyrille de
> Brébisson" <[email protected]> wrote:
>>Hello,
>>
>>I have an issue with my DW735. Basically, the rollers do not grab the wood
>>enough to pull it through the cutters, even with a light cut.
>>I think that the oil that was in the Jatoba I worked on earlier (lots of
>>ft²
>>for flooring) ended up on the rollers and is causing them to slip...
>>
>>Do you think that this is the likely reason?
>
> Certainly *possible*, anyway. I don't know about "likely".
>
>>how do I fix the problem?
>
> Try cleaning the rollers with a rag dipped in paint thinner (mineral
> spirits).
> Unplug the power cord, and crank the head all the way up to the top,
> before
> you start.
And after you're done with the rollers, clean and wax the bed.
In article <[email protected]>, "Cyrille de Brébisson" <[email protected]> wrote:
>Hello,
>
>I have an issue with my DW735. Basically, the rollers do not grab the wood
>enough to pull it through the cutters, even with a light cut.
>I think that the oil that was in the Jatoba I worked on earlier (lots of ft²
>for flooring) ended up on the rollers and is causing them to slip...
>
>Do you think that this is the likely reason?
Certainly *possible*, anyway. I don't know about "likely".
>how do I fix the problem?
Try cleaning the rollers with a rag dipped in paint thinner (mineral spirits).
Unplug the power cord, and crank the head all the way up to the top, before
you start.
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.