On Apr 7, 9:43=A0am, Steve Turner <[email protected]>
wrote:
> On 4/7/2012 12:22 AM, Robatoy wrote:
>
> >https://www.inventables.com/technologies/cnc-mill-kits-shapeoko
>
> Rob, do you have any experience with Legacy CNC products?
>
> http://www.legacycncwoodworking.com/
>
> The owner was giving a seminar at the woodworking show in Houston which I=
quite
> enjoyed, and his machines looked very nice, but I really don't have any i=
dea
> how they stack up to the competition.
>
> --
> Any given amount of traffic flow, no matter how
> sparse, will expand to fill all available lanes.
> To reply, eat the taco.http://www.flickr.com/photos/bbqboyee/
I am a little familiar with their older, tuning/router systems and
found them to be well-made. Pricy, but well made.
The one important question you have to ask yourself is: what you plan
to do with it. And in what quantities.
I think the Legacy is very much geared towards a production shop and
is likely priced that way.
A very wise man, who shall remain nameless (Morris) once told me that
once I acquired a CNC, I would have no idea where it would take me. I
bought it to do sink-cut-outs for my countertop shop and now am
cutting complex 3D signs for a handful of local sign artists, who used
to carve these kinds of signs by hands, sometimes taking weeks what I
can do in a day (and better too). So he was right.
Another piece of advice was that I should take the plunge and buy a
CNC with a spindle as router-based machines are just not designed to
run 5-8 hours at the time. I am very glad I took that plunge.
One thing I could have done differently, was to have bought a smaller
bed. I like that I have a 4 x 8 footer, but a 32" x 24" would have
done 75% of my tasks saving a boat-load of cash.
I would give the ShopBot Buddy a serious look as the current software
allows tiling with high precision. One should be able to have a 2HP
spindle CNC for under $10K. And 10K ain't what it used to be.
I'm sure the Legacy is nice, looks good, love the idea of an A-Axis
and uses the exact same bearings as my General, a company which has
also just introduced a smaller machine.
HTH
On Apr 7, 1:22=A0am, Robatoy <[email protected]> wrote:
> https://www.inventables.com/technologies/cnc-mill-kits-shapeoko
I've been looking at the hobbyist CNC mill designs for a while now,
and have pretty much settled on this design (Shapeoko).
I was rather disappointed that the price for the full kit was so much
more than the $300 price-point originally envisioned --- getting $649
past the finance committee is a bit more awkward. It would help if
they'd offer an option to purchase the kit in sections --- the
hardware for $195 first, then the electronics, then the router and
bits and base.
William
On 4/7/2012 12:22 AM, Robatoy wrote:
> https://www.inventables.com/technologies/cnc-mill-kits-shapeoko
Rob, do you have any experience with Legacy CNC products?
http://www.legacycncwoodworking.com/
The owner was giving a seminar at the woodworking show in Houston which I quite
enjoyed, and his machines looked very nice, but I really don't have any idea
how they stack up to the competition.
--
Any given amount of traffic flow, no matter how
sparse, will expand to fill all available lanes.
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/