Do you mean the cam tension lever not staying in place?
If that is the problem, easy fix.
Remove the 4 star screws on the plastic housing for the on off switch and
you'll find a large allen screw
on top of the tension knob. Just tighten that down hard and replace the
cover and the screws.
"tdup2" <[email protected]> wrote in message
news:[email protected]...
> I seen in the past that someone posted how to set the internal tension on
> the scroll saw. I'm having trouble with the tension staying in place. It
> cuts with the grain good but against the grain it jumps. Never did that in
> the past so I know something internally is wrong.
>
> Thanks,
> Tim
>
>