The more I read, the more I begin to think that I will need (or at least
want) a planer for my workshop. Being a hobbiest, I don't need a
massive beast ... just something that will do a good job for a long time.
Okay, so the one that seems to stand out for me is the Makita 2012NB 12"
Planer. It gets good reviews and is in my price range (under $500).
Amazon has its list price at $900, marked down to $412. Sounds like a
great deal.
Could anyone vouch for this planer, or recommend a better one for about
the same money (or hopefully, less)?
Jack
Said to be a great planer, but it is dated and comments of snipe are
often accompanied with postive reviews.
A dewalt 735 is the planer you want, the surface out of the low speed
option can be finished directly for most projects with SWMBO
requirements, saving a TON of time.
Do you have adequate dust collection?
I use a DeWally in the workshop as well - although not so much these days as
I have a real thicknesser in the shape of a 20" 5HP 3phase jobby . . .
But The DeWally has served me well - and is plenty grunty enough to handle a
lot of the heavy duty hardwoods I have thrown through it.
I use a long length of Laminated board on which to run the timber through -
seems to eliminate any snipe.
Very positive adjustment - and locking bar is convenient.
Phil
The Nannup Furniture Gallery
Support small business ~ Save a Species Today ~ ME!
www.swanriverfurniture.com.au
[email protected]
"Buster" <[email protected]> wrote in message
news:iQPUe.466475$s54.365483@pd7tw2no...
> I've got a Dewalt 735, and it is pure sweetness. I would recomend it
> highly.
>
> "mywebaccts (at) PLUGcomcast.net" <"mywebaccts (at) PLUGcomcast.net">
> wrote in message news:[email protected]...
>> The more I read, the more I begin to think that I will need (or at least
>> want) a planer for my workshop. Being a hobbiest, I don't need a massive
>> beast ... just something that will do a good job for a long time.
>>
>> Okay, so the one that seems to stand out for me is the Makita 2012NB 12"
>> Planer. It gets good reviews and is in my price range (under $500).
>> Amazon has its list price at $900, marked down to $412. Sounds like a
>> great deal.
>>
>> Could anyone vouch for this planer, or recommend a better one for about
>> the same money (or hopefully, less)?
>>
>> Jack
>>
>>
>
>
That fan ejection system is just plane out amazing. I had dust and chips
over every square ich of my shop... The Bandsaw purchase has been postponed
for a good dust collection system now.
"arw01" <[email protected]> wrote in message
news:[email protected]...
> Said to be a great planer, but it is dated and comments of snipe are
> often accompanied with postive reviews.
>
> A dewalt 735 is the planer you want, the surface out of the low speed
> option can be finished directly for most projects with SWMBO
> requirements, saving a TON of time.
>
> Do you have adequate dust collection?
>
"mywebaccts (at) PLUGcomcast.net" <"mywebaccts (at) PLUGcomcast.net"> wrote
in message news:[email protected]...
> The more I read, the more I begin to think that I will need (or at least
> want) a planer for my workshop. Being a hobbiest, I don't need a massive
> beast ... just something that will do a good job for a long time.
>
> Okay, so the one that seems to stand out for me is the Makita 2012NB 12"
> Planer. It gets good reviews and is in my price range (under $500).
> Amazon has its list price at $900, marked down to $412. Sounds like a
> great deal.
>
> Could anyone vouch for this planer, or recommend a better one for about
> the same money (or hopefully, less)?
Probably a good choice and reportedly noticeably quieter than the
competition.
Don't have the DC in place yet, but I'll make sure that I have adequate
HP for it. I'll also have a nice squirrel cage exhaust to take the
finer dust out of the air ASAP. And of course, I'll wear my face mask.
Can't be too safe when it comes to wood dust. Nasty stuff!
Jack
arw01 wrote:
> Said to be a great planer, but it is dated and comments of snipe are
> often accompanied with postive reviews.
>
> A dewalt 735 is the planer you want, the surface out of the low speed
> option can be finished directly for most projects with SWMBO
> requirements, saving a TON of time.
>
> Do you have adequate dust collection?
>
I bought the Makita because it was the lightest on the market, and I have to
move it from a shelf to a stand everytime I use it.
It works great, though it has a bit more snipe than I would like; but they
probably all do.
But if I were to do it again, I might get something cheaper and heavier.
Maybe not, who knows.
I lift the outboard end as the board starts into the AP10 and also as
it ends the pass to virtually eliminate the little snipe I used to
have.
On Sun, 11 Sep 2005 03:03:21 GMT, "Toller" <[email protected]> wrote:
>It works great, though it has a bit more snipe than I would like; but they
>probably all do.
I've got a Dewalt 735, and it is pure sweetness. I would recomend it
highly.
"mywebaccts (at) PLUGcomcast.net" <"mywebaccts (at) PLUGcomcast.net"> wrote
in message news:[email protected]...
> The more I read, the more I begin to think that I will need (or at least
> want) a planer for my workshop. Being a hobbiest, I don't need a massive
> beast ... just something that will do a good job for a long time.
>
> Okay, so the one that seems to stand out for me is the Makita 2012NB 12"
> Planer. It gets good reviews and is in my price range (under $500).
> Amazon has its list price at $900, marked down to $412. Sounds like a
> great deal.
>
> Could anyone vouch for this planer, or recommend a better one for about
> the same money (or hopefully, less)?
>
> Jack
>
>