bit of a gloat

Very nice - I have the DW618 router (basically same as 616 with
variable speed) and I've been very happy with it. I wish I could get
on of the plunge kits - but that's lower on the priority list than a
drill press, for example.
Anyway, good finds - enjoy.
Andy

What Lowes and what town? Heseusse, that's a nice price on the DeWalt kit.
If it's in the area, I'm willing to drive...


"bob" <[email protected]> wrote in message
news:[email protected]...
> Happened by the reduced tool bin at Lowes the other day. I picked up a
> DeWalt DW616PK 1 3/4 hp plunge and fixed router kit for $80 and a Senco
> FinishPro 18 gauge nailer and mini-compressor for $84. Both in original
> packaging with security seals/tape intact. There were several of each on
> the table. That Senco nailer compressor is sweet. Sure is easier to haul
> around and far less noisy than my Campbell Hausfeld oil-less 20 gallon
> unit.
>
> I can't decide if I like my Porter Cable 18 gauge nailer or the Senco
> better. I don't need both and one will likely end up on eBay. The
> compressor is a keeper.
>
> Bob
>

Nice find.
The compressor kicks butt - its been great to go to a job on the 3rd floor
and be able carry it up w/ 1 hand!

"bob" <[email protected]> wrote in message
news:[email protected]...
> Happened by the reduced tool bin at Lowes the other day. I picked up a
> DeWalt DW616PK 1 3/4 hp plunge and fixed router kit for $80 and a Senco
> FinishPro 18 gauge nailer and mini-compressor for $84. Both in original
> packaging with security seals/tape intact. There were several of each on
> the table. That Senco nailer compressor is sweet. Sure is easier to haul
> around and far less noisy than my Campbell Hausfeld oil-less 20 gallon
> unit.
>
> I can't decide if I like my Porter Cable 18 gauge nailer or the Senco
> better. I don't need both and one will likely end up on eBay. The
> compressor is a keeper.
>
> Bob
>

Birmingham, Alabama. Lowes in Hoover, AL (a suburb). Best to call first if
you're going to drive.


"Hedley" <[email protected]> wrote in message
news:[email protected]...
> What Lowes and what town? Heseusse, that's a nice price on the DeWalt
> kit. If it's in the area, I'm willing to drive...
>
>
> "bob" <[email protected]> wrote in message
> news:[email protected]...
>> Happened by the reduced tool bin at Lowes the other day. I picked up a
>> DeWalt DW616PK 1 3/4 hp plunge and fixed router kit for $80 and a Senco
>> FinishPro 18 gauge nailer and mini-compressor for $84. Both in original
>> packaging with security seals/tape intact. There were several of each on
>> the table. That Senco nailer compressor is sweet. Sure is easier to
>> haul around and far less noisy than my Campbell Hausfeld oil-less 20
>> gallon unit.
>>
>> I can't decide if I like my Porter Cable 18 gauge nailer or the Senco
>> better. I don't need both and one will likely end up on eBay. The
>> compressor is a keeper.
>>
>> Bob
>>
>
>

I gotta pick up my dog this weekend, I'll be driving through B'ham on my way
back to Chi-town (flying down, thankfully).

I think I might have to check this one out.

Thanks.


"bob" <[email protected]> wrote in message
news:[email protected]...
> Birmingham, Alabama. Lowes in Hoover, AL (a suburb). Best to call first
> if you're going to drive.
>
>
> "Hedley" <[email protected]> wrote in message
> news:[email protected]...
>> What Lowes and what town? Heseusse, that's a nice price on the DeWalt
>> kit. If it's in the area, I'm willing to drive...
>>
>>
>> "bob" <[email protected]> wrote in message
>> news:[email protected]...
>>> Happened by the reduced tool bin at Lowes the other day. I picked up a
>>> DeWalt DW616PK 1 3/4 hp plunge and fixed router kit for $80 and a Senco
>>> FinishPro 18 gauge nailer and mini-compressor for $84. Both in original
>>> packaging with security seals/tape intact. There were several of each
>>> on the table. That Senco nailer compressor is sweet. Sure is easier to
>>> haul around and far less noisy than my Campbell Hausfeld oil-less 20
>>> gallon unit.
>>>
>>> I can't decide if I like my Porter Cable 18 gauge nailer or the Senco
>>> better. I don't need both and one will likely end up on eBay. The
>>> compressor is a keeper.
>>>
>>> Bob
>>>
>>
>>
>
>

I called... sold out.



"Hedley" <[email protected]> wrote in message
news:[email protected]...
>I gotta pick up my dog this weekend, I'll be driving through B'ham on my
>way back to Chi-town (flying down, thankfully).
>
> I think I might have to check this one out.
>
> Thanks.
>
>
> "bob" <[email protected]> wrote in message
> news:[email protected]...
>> Birmingham, Alabama. Lowes in Hoover, AL (a suburb). Best to call first
>> if you're going to drive.
>>
>>
>> "Hedley" <[email protected]> wrote in message
>> news:[email protected]...
>>> What Lowes and what town? Heseusse, that's a nice price on the DeWalt
>>> kit. If it's in the area, I'm willing to drive...
>>>
>>>
>>> "bob" <[email protected]> wrote in message
>>> news:[email protected]...
>>>> Happened by the reduced tool bin at Lowes the other day. I picked up a
>>>> DeWalt DW616PK 1 3/4 hp plunge and fixed router kit for $80 and a Senco
>>>> FinishPro 18 gauge nailer and mini-compressor for $84. Both in
>>>> original packaging with security seals/tape intact. There were several
>>>> of each on the table. That Senco nailer compressor is sweet. Sure is
>>>> easier to haul around and far less noisy than my Campbell Hausfeld
>>>> oil-less 20 gallon unit.
>>>>
>>>> I can't decide if I like my Porter Cable 18 gauge nailer or the Senco
>>>> better. I don't need both and one will likely end up on eBay. The
>>>> compressor is a keeper.
>>>>
>>>> Bob
>>>>
>>>
>>>
>>
>>
>
>