Its pretty amazing what a tune up will do.
Ive had my bandsaw for about 2 years now and it has always been just an OK
tool to me.
About 3 months ago I picked up a riser block for it b/c I had some nice
thick boards I wanted to resaw. I installed the block and the stock blade
and went for it - results were less than impressive to say the least. I
knew not to expect miracles but the results were pretty dissapointing. I
really didnt have too much time to mess w/ it so I just kind of made due w/
it as is. Getting more and more pissed each time I had to use it.
The other week I was in the local woodcraft store where they had timberwolf
blades on sale so I spoke w/ one of the guys there and explained what I
wanted to do and the kind of saw I had (Jet 14 closed base) - he recommended
a blade and off I went.
(Driveby - neener : I learned how to twist the BS blade into that cool
little loop )
I finally had some time today so I spent the better part of 2 hours
installing the new blade and tuning up the saw to the Nth degree. Also -
replaced the stock guides w/ some hardwood ones soaked in WD40 (thanks for
the suggestion).
Any way - after it was all done - I figured it was time to try it again -
worked like a dream.
I was able to slice off a nice 1/8" x 8" x3 foot long of poplar on the first
try =)
Holly Crap was pretty much all I could think of - I should have done this a
long time ago.
Its amazing the difference a good tune up will do to your tools.
Just figured Id post this for all those procrastinators out there =)
I did the same thing he did, only I put on an old blade. I thought it was
dull and it cut a bow in wood when resawing. After the tune up, the blade
cut like it was new and it cut straight. I attribute most of it to getting
the upper and lower wheels coplanar. It really does make a difference.
Preston
"Gerald Ross" <[email protected]> wrote in message
news:[email protected]...
> I wouldn't give the tune-up all the credit. Put your old blade back on
> and tune it up and try it.
>
>
I wouldn't give the tune-up all the credit. Put your old blade back on
and tune it up and try it.
Rob V wrote:
>
> Its pretty amazing what a tune up will do.
>
> Ive had my bandsaw for about 2 years now and it has always been just an OK
> tool to me.
> About 3 months ago I picked up a riser block for it b/c I had some nice
> thick boards I wanted to resaw. I installed the block and the stock blade
> and went for it - results were less than impressive to say the least. I
> knew not to expect miracles but the results were pretty dissapointing. I
> really didnt have too much time to mess w/ it so I just kind of made due w/
> it as is. Getting more and more pissed each time I had to use it.
> The other week I was in the local woodcraft store where they had timberwolf
> blades on sale so I spoke w/ one of the guys there and explained what I
> wanted to do and the kind of saw I had (Jet 14 closed base) - he recommended
> a blade and off I went.
> (Driveby - neener : I learned how to twist the BS blade into that cool
> little loop )
> I finally had some time today so I spent the better part of 2 hours
> installing the new blade and tuning up the saw to the Nth degree. Also -
> replaced the stock guides w/ some hardwood ones soaked in WD40 (thanks for
> the suggestion).
> Any way - after it was all done - I figured it was time to try it again -
> worked like a dream.
> I was able to slice off a nice 1/8" x 8" x3 foot long of poplar on the first
> try =)
> Holly Crap was pretty much all I could think of - I should have done this a
> long time ago.
>
> Its amazing the difference a good tune up will do to your tools.
>
> Just figured Id post this for all those procrastinators out there =)
--
Gerald Ross
Cochran, GA
...........................................
I've got nothing to say -- don't make
me say it twice.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
At least now the Stewart portion is closer to valley floor.
And two lanes. ;-)
--
There is only one period and no underscores in the real email address.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
On Fri, 14 Nov 2003 10:20:51 GMT, Unisaw A100 <[email protected]>
queried:
>Luigi Zanasi wrote:
>>Ace Tool Repair in Smithers (which is practically next
>>door to me, close to the southern end of the Stewart-
>>Cassiar dirt t^H^H^H^H^H^H highway).
>
>
>Yahbut, did you actually go there, see it, smell the
>cosmolene? Reason I ask is I want to know, is it as
>good as I always envisioned?
>
>UA100, wondering about a pilgrimage to Ace Tool Repair...
By practically next door, I mean about only 1,200 kilometres. Last
time I went through Smithers was in 1990 or thereabouts, so, sorry,
the answers your questions are, unfortunately, since Ace Tool Repair
did not exist then: no and I don't know.
Luigi
Replace "no" with "yk" twice
in reply address for real email address
"Man is a tool-using animal. Weak in himself and of small stature,
he stands on a basis of some half-square foot, has to straddle out
his legs lest the very winds supplant him. Nevertheless, he can
use tools, can devise tools: with these the granite mountain melts
into light dust before him: seas are his smooth highway, winds and
fire his unwearying steeds. Nowhere do you find him without tools.
Without tools he is nothing: with tools he is all."
Thomas Carlyle
On Thu, 13 Nov 2003 23:10:08 GMT, "Rob V" <[email protected]> scribbled
>Its amazing the difference a good tune up will do to your tools.
>
>Just figured Id post this for all those procrastinators out there =)
I've been procrastinating for 11-12 years or so to fix up my ca. 1952
Delta Milwaukee (Thanks, Keith, for the list of serial #s and dates on
OWWM) 14" bandsaw. I finally ordered new blades and cool-blocks from
LVT and a tension spring and tires from Ace Tool Repair in Smithers
(which is practically next door to me, close to the southern end of
the Stewart-Cassiar dirt t^H^H^H^H^H^H highway).
Luigi
Replace "no" with "yk" twice
in reply address for real email address
"Man is a tool-using animal. Weak in himself and of small stature,
he stands on a basis of some half-square foot, has to straddle out
his legs lest the very winds supplant him. Nevertheless, he can
use tools, can devise tools: with these the granite mountain melts
into light dust before him: seas are his smooth highway, winds and
fire his unwearying steeds. Nowhere do you find him without tools.
Without tools he is nothing: with tools he is all."
Thomas Carlyle
Luigi Zanasi wrote:
>Ace Tool Repair in Smithers (which is practically next
>door to me, close to the southern end of the Stewart-
>Cassiar dirt t^H^H^H^H^H^H highway).
Yahbut, did you actually go there, see it, smell the
cosmolene? Reason I ask is I want to know, is it as
good as I always envisioned?
UA100, wondering about a pilgrimage to Ace Tool Repair...