I'm using the DW625 in a router table and am thinking of getting the
DW6915 dust extraction kit. I'd like to know if anyone else is using
this setup and if it's effective. I couldn't find any pics of it to
make sure it won't interfere with my router cabinet. I mainly use a
1/4" spiral bit through a 1" hole in the router plate.
Thanks!
Larr
I use a piece of 1/8" clear polycarb. in the shape of the cutout of
the top of the base with a polypropolene sump pump pipe hot glued in
the top. It works great and the one I have for the router table keeps
out of the way of the collet so I can put a wrench on the collet nut.
[email protected] (Larry West) wrote in message news:<[email protected]>...
> I'm using the DW625 in a router table and am thinking of getting the
> DW6915 dust extraction kit. I'd like to know if anyone else is using
> this setup and if it's effective. I couldn't find any pics of it to
> make sure it won't interfere with my router cabinet. I mainly use a
> 1/4" spiral bit through a 1" hole in the router plate.
> Thanks!
>
> Larr