"Unquestionably Confused" <[email protected]> wrote in message
news:[email protected]...
>
> I just picked up a lightly used PC 505 ½ sheet for $55. They ARE still
> in production and street price is around $170 or so plus tax and/or
> shipping.
>
Cool - thanks for posting that. The 1/2 sheet sander should make a better
tool for flattening out workpieces so it's good to see they're still out
there.
--
-Mike-
[email protected]
Porter Cable 505 - have had one for many years - very satisfied with it's
performance.
Dave
"Virgle Griffith" <[email protected]> wrote in message
news:[email protected]...
> What is your choice of 1/2 sheet sanders?
> My old craftsman is sick.
> Virgle
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
On Tue, 01 Mar 2005 18:21:16 GMT, "Virgle Griffith"
<[email protected]> wrote:
>What is your choice of 1/2 sheet sanders?
>My old craftsman is sick.
>Virgle
>
porter cable is the "classic"
"TeamCasa" <[email protected]> wrote in message
news:[email protected]...
> Porter Cable 505 - have had one for many years - very satisfied with it's
> performance.
> Dave
>
>
> "Virgle Griffith" <[email protected]> wrote in message
> news:[email protected]...
> > What is your choice of 1/2 sheet sanders?
> > My old craftsman is sick.
> > Virgle
Thanks for all the replies.
Virgle
"Virgle Griffith" <[email protected]> wrote in message
news:[email protected]...
> What is your choice of 1/2 sheet sanders?
> My old craftsman is sick.
> Virgle
None. I don't use 1/2 sheet sanders. If I did, I would look at DeWalt,
Makita, Porter Cable and even... Rigid. Some of the Rigid stuff actually
gets pretty good reviews. Having said that, I'm not sure if any of those
manufacturers even make a 1/2 sheet sander anymore.
--
-Mike-
[email protected]
on 3/1/2005 12:50 PM Mike Marlow said the following:
> "Virgle Griffith" <[email protected]> wrote in message
> news:[email protected]..
> None. I don't use 1/2 sheet sanders. If I did, I would look at DeWalt,
> Makita, Porter Cable and even... Rigid. Some of the Rigid stuff actually
> gets pretty good reviews. Having said that, I'm not sure if any of those
> manufacturers even make a 1/2 sheet sander anymore.
I just picked up a lightly used PC 505 ½ sheet for $55. They ARE still
in production and street price is around $170 or so plus tax and/or
shipping.
VERY solid machine with - so far as I've been able to detect - minimal
vibration transmitted to the operator. This feeling was mentioned in at
least of a couple of the reviews I read and I found it to be the case.
Sucker's solid as a rock and the pad will use either adhesive backed
sheets or clamped half sheets.
Suspect that if I were 30 years younger this would still be the ONLY
half sheet sander I'd ever have to buy.