Available in Raleigh, NC area:
Vintage Rockwell Delta HD shaper. Older model with cast iron skirt, 3-phase
motor, fence, etc. Complete with 1/2" arbor. $400
Rockwell Delta 6X48 belt sander/finishing machine on enclosed factory base,
3-phase motor, tilting work table, etc. $300
Timesavers 6X48 Mini-Belt auto feed surface sander. Very unusual machine,
3-phase motor. $250
Must sell asap due to loss of space. Also have restorable vintage Rockwell
Delta 10" Unisaw, Grizzley 3hp single-phase 4-bag dust collector with approx
30 ft of 4" hose, vintage Buffalo USA 18" floor drill press, roller conveyor
and much more.
Check return e-mail address and let me know your needs, make offers, etc. MUST
SELL!
Many thanks,
Lance
Lance,
Please let me know what you want for the dust collector.
you can get me at
moc . arezrev @ vbr_remove_this
(reverse the above)
"Uncle Lucky" <[email protected]> wrote in message
news:[email protected]...
> Available in Raleigh, NC area:
>
> Vintage Rockwell Delta HD shaper. Older model with cast iron skirt,
3-phase
> motor, fence, etc. Complete with 1/2" arbor. $400
>
> Rockwell Delta 6X48 belt sander/finishing machine on enclosed factory
base,
> 3-phase motor, tilting work table, etc. $300
>
> Timesavers 6X48 Mini-Belt auto feed surface sander. Very unusual machine,
> 3-phase motor. $250
>
> Must sell asap due to loss of space. Also have restorable vintage
Rockwell
> Delta 10" Unisaw, Grizzley 3hp single-phase 4-bag dust collector with
approx
> 30 ft of 4" hose, vintage Buffalo USA 18" floor drill press, roller
conveyor
> and much more.
> Check return e-mail address and let me know your needs, make offers, etc.
MUST
> SELL!
> Many thanks,
> Lance
>
Lance,
I'm interested in the timesaver and had sent you an email and it was reject
by the ISP,
can you send me a digital picture of the machine, if it is what I'm looking
for your price is acceptable, let me know asap.
thanks,
Ed Angell [email protected]
"Uncle Lucky" <[email protected]> wrote in message
news:[email protected]...
> Available in Raleigh, NC area:
>
> Vintage Rockwell Delta HD shaper. Older model with cast iron skirt,
3-phase
> motor, fence, etc. Complete with 1/2" arbor. $400
>
> Rockwell Delta 6X48 belt sander/finishing machine on enclosed factory
base,
> 3-phase motor, tilting work table, etc. $300
>
> Timesavers 6X48 Mini-Belt auto feed surface sander. Very unusual machine,
> 3-phase motor. $250
>
> Must sell asap due to loss of space. Also have restorable vintage
Rockwell
> Delta 10" Unisaw, Grizzley 3hp single-phase 4-bag dust collector with
approx
> 30 ft of 4" hose, vintage Buffalo USA 18" floor drill press, roller
conveyor
> and much more.
> Check return e-mail address and let me know your needs, make offers, etc.
MUST
> SELL!
> Many thanks,
> Lance
>
Lance:
Curious about the unisaw and what kind of condition the belt sander is in.
John
"Uncle Lucky" <[email protected]> wrote in message
news:[email protected]...
> Available in Raleigh, NC area:
>
> Vintage Rockwell Delta HD shaper. Older model with cast iron skirt,
3-phase
> motor, fence, etc. Complete with 1/2" arbor. $400
>
> Rockwell Delta 6X48 belt sander/finishing machine on enclosed factory
base,
> 3-phase motor, tilting work table, etc. $300
>
> Timesavers 6X48 Mini-Belt auto feed surface sander. Very unusual machine,
> 3-phase motor. $250
>
> Must sell asap due to loss of space. Also have restorable vintage
Rockwell
> Delta 10" Unisaw, Grizzley 3hp single-phase 4-bag dust collector with
approx
> 30 ft of 4" hose, vintage Buffalo USA 18" floor drill press, roller
conveyor
> and much more.
> Check return e-mail address and let me know your needs, make offers, etc.
MUST
> SELL!
> Many thanks,
> Lance
>