Is what Norm did legit?

Poor 'ol Norm. Takes a helluva beating here on occasion.

The method for table top stabilization is not only valid, but well
accepted over the last few hundred years of table making.

I did think the comment on waiting for the glue to dry was funny,
though...

Robert

David wrote:
> Sure it would work. Screwed; not glued it would allow movement, wouldn't
> it, bf?

See, that's the thing, the holes were not slotted to allow movement, he
just screwed the boards to underside of the table top (perpendicular to
the grain). I should've been clearer in the original post.

Sure it would work. Screwed; not glued it would allow movement, wouldn't
it, bf? Slotted holes in the long boards, right? At least he didn't
include "and a few brads to hold it until the glue dries."

Dave

bf wrote:

> I got one of Norm's old books from the library.
>
> Basically, he was making a table top with a solid wood slab.
> One the underside of the table top, he screwed four long boards
> perpendicular to the grain. Is this a legit technique, or would it
> cause the table top to crack when cross grain movement occurs?
>
> If that's a legit technique, I could see using it to help keep the
> tabletop flat. Opinions? Thanks.
>

On 24 May 2005 08:57:10 -0700, "bf" <[email protected]> wrote:

>I got one of Norm's old books from the library.
>
>Basically, he was making a table top with a solid wood slab.
>One the underside of the table top, he screwed four long boards
>perpendicular to the grain. Is this a legit technique, or would it
>cause the table top to crack when cross grain movement occurs?
>
>If that's a legit technique, I could see using it to help keep the
>tabletop flat. Opinions? Thanks.

the table top WILL NOT move..
Norm obviously told it not too, and the table is scared shitless that if it
moves, Norm will be back to fix it....
probably with a moving van full of power tools.. *g*



mac

Please remove splinters before emailing

What ever Norm does is fine with me. I have great admiration for him and
hope his show/s never leave TV.

"bf" <[email protected]> wrote in message
news:[email protected]...
>
>
> David wrote:
> > Sure it would work. Screwed; not glued it would allow movement, wouldn't
> > it, bf?
>
> See, that's the thing, the holes were not slotted to allow movement, he
> just screwed the boards to underside of the table top (perpendicular to
> the grain). I should've been clearer in the original post.
>

> At least he didn't
> include "and a few brads to hold it until the glue dries."


ROFLMAO!