Some time ago, I found some matterial on circular saws, I think coming out of a
Canadian distributor, for an Israeli manufacturer.
Can niether recall the name, nor where I found the material, and would like to
include the company in an article coming up fairly quickly.
Any ideas? I played with Di---???? And I think it is still close to the start,
but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
Charlie Self
"Doublethink means the power of holding two contradictory beliefs in one's mind
simultaneously, and accepting both of them." George Orwell
Dimar. Based in North York, Toronto, near Keele and Steeles Ave. Sold by Lee
Valley and Sharpco.
"Charlie Self" <[email protected]> wrote in message
news:[email protected]...
> Some time ago, I found some matterial on circular saws, I think coming out
of a
> Canadian distributor, for an Israeli manufacturer.
>
> Can niether recall the name, nor where I found the material, and would
like to
> include the company in an article coming up fairly quickly.
>
> Any ideas? I played with Di---???? And I think it is still close to the
start,
> but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
>
> Charlie Self
> "Doublethink means the power of holding two contradictory beliefs in one's
mind
> simultaneously, and accepting both of them." George Orwell
In article <[email protected]>,
[email protected] says...
> Some time ago, I found some matterial on circular saws, I think coming out of a
> Canadian distributor, for an Israeli manufacturer.
>
> Can niether recall the name, nor where I found the material, and would like to
> include the company in an article coming up fairly quickly.
>
> Any ideas? I played with Di---???? And I think it is still close to the start,
> but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
>
> Charlie Self
> "Doublethink means the power of holding two contradictory beliefs in one's mind
> simultaneously, and accepting both of them." George Orwell
>
Dimar - got an old catalog and some of their router bits (great
quality) Unfortunately no contact details in the catologue. Most of the
info is in German but the pictures talk.
HTH
--
Phillip Hansen
Skil-Phil Solutions
"Charlie Self" <[email protected]> wrote in message
news:[email protected]...
> Some time ago, I found some matterial on circular saws, I think coming out
of a
> Canadian distributor, for an Israeli manufacturer.
>
> Can niether recall the name, nor where I found the material, and would
like to
> include the company in an article coming up fairly quickly.
>
> Any ideas? I played with Di---???? And I think it is still close to the
start,
> but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
>
> Charlie Self
> "Doublethink means the power of holding two contradictory beliefs in one's
mind
> simultaneously, and accepting both of them." George Orwell
Hi Charlie -
It's "Amana" in the US.... http://www.amanatool.com/
Cheers -
Rob
Rob Lee responds:
>> Some time ago, I found some matterial on circular saws, I think coming out
>of a
>> Canadian distributor, for an Israeli manufacturer.
>>
>> Can niether recall the name, nor where I found the material, and would
>like to
>> include the company in an article coming up fairly quickly.
>>
>> Any ideas? I played with Di---???? And I think it is still close to the
>start,
>> but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
>>
>> Charlie Self
>> "Doublethink means the power of holding two contradictory beliefs in one's
>mind
>> simultaneously, and accepting both of them." George Orwell
>
>Hi Charlie -
>
>It's "Amana" in the US.... http://www.amanatool.com/
I had a feeling--I seem to recall that, too. Best to leave 'em be, then,
because they're already well known under another name, a company which I've
already talked to.
Thanks.
Charlie Self
"Doublethink means the power of holding two contradictory beliefs in one's mind
simultaneously, and accepting both of them." George Orwell
[email protected] (Charlie Self) wrote:
>>> Some time ago, I found some matterial on circular saws, I think coming out
>>of a
>>> Canadian distributor, for an Israeli manufacturer.
>>>
>>> Can niether recall the name, nor where I found the material, and would
>>like to
>>> include the company in an article coming up fairly quickly.
>>>
>>> Any ideas? I played with Di---???? And I think it is still close to the
>>start,
>>> but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
Dimar?
http://www.dimarcanada.com/
I've seen these blades at the local House of Tools but I've yet to try
one.
Ken Muldrew
[email protected]
(remove all letters after y in the alphabet)
Ken Muldrew notes:
>
>Dimar?
>
>http://www.dimarcanada.com/
>
>I've seen these blades at the local House of Tools but I've yet to try
>one.
Rob Lee says they're sold as Amana in the States, so they'll be excellent value
for the money, and darned good blades, to boot..
Charlie Self
"Doublethink means the power of holding two contradictory beliefs in one's mind
simultaneously, and accepting both of them." George Orwell
"Ken Muldrew" <[email protected]> wrote in message
news:[email protected]...
> [email protected] (Charlie Self) wrote:
>
>>>> Some time ago, I found some matterial on circular saws, I think coming
>>>> out
>>>of a
>>>> Canadian distributor, for an Israeli manufacturer.
>>>>
>>>> Can niether recall the name, nor where I found the material, and would
>>>like to
>>>> include the company in an article coming up fairly quickly.
>>>>
>>>> Any ideas? I played with Di---???? And I think it is still close to the
>>>start,
>>>> but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
>
> Dimar?
>
> http://www.dimarcanada.com/
>
> I've seen these blades at the local House of Tools but I've yet to try
> one.
>
> Ken Muldrew
> [email protected]
> (remove all letters after y in the alphabet)
I have the 50 tooth Combination blade.....it's great.
Ed
Ditto the Dado blade. Have had great results with it.
Cheers,
cc
"Ed" <[email protected]> wrote in message
news:[email protected]...
>
> "Ken Muldrew" <[email protected]> wrote in message
> news:[email protected]...
>> [email protected] (Charlie Self) wrote:
>>
>>>>> Some time ago, I found some matterial on circular saws, I think coming
>>>>> out
>>>>of a
>>>>> Canadian distributor, for an Israeli manufacturer.
>>>>>
>>>>> Can niether recall the name, nor where I found the material, and would
>>>>like to
>>>>> include the company in an article coming up fairly quickly.
>>>>>
>>>>> Any ideas? I played with Di---???? And I think it is still close to
>>>>> the
>>>>start,
>>>>> but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
>>
>> Dimar?
>>
>> http://www.dimarcanada.com/
>>
>> I've seen these blades at the local House of Tools but I've yet to try
>> one.
>>
>> Ken Muldrew
>> [email protected]
>> (remove all letters after y in the alphabet)
>
> I have the 50 tooth Combination blade.....it's great.
>
> Ed
>
Dimar. See dimarcanada.com for their website. This is what my dado set
from Lee Valley says on
the case anyway. HTH.
Cheers,
cc
"Charlie Self" <[email protected]> wrote in message
news:[email protected]...
> Some time ago, I found some matterial on circular saws, I think coming out
> of a
> Canadian distributor, for an Israeli manufacturer.
>
> Can niether recall the name, nor where I found the material, and would
> like to
> include the company in an article coming up fairly quickly.
>
> Any ideas? I played with Di---???? And I think it is still close to the
> start,
> but my finishes (d-marc, dimark, dimarc) ain't hitting on much.
>
> Charlie Self
> "Doublethink means the power of holding two contradictory beliefs in one's
> mind
> simultaneously, and accepting both of them." George Orwell
Cubby responds:
>Dimar. See dimarcanada.com for their website. This is what my dado set
>from Lee Valley says on
>the case anyway. HTH.
Marvelous. Thank you.
Charlie Self
"Doublethink means the power of holding two contradictory beliefs in one's mind
simultaneously, and accepting both of them." George Orwell
On 12 Oct 2004 16:04:51 GMT, [email protected] (Charlie Self)
scribbled:
>Cubby responds:
>
>>Dimar. See dimarcanada.com for their website. This is what my dado set
>>from Lee Valley says on
>>the case anyway. HTH.
>
>Marvelous. Thank you.
I once tried ordering a set of blades for my Makita 2040 planer from
them. I sent an email on a Saturday, they got back to me on a Sunday &
the blades were on their way on the Monday after a phone call to
confirm. They told me they normally don't sell retail, but since I was
in a "remote" area, they sold them to me directly. Good bunch to deal
with & the blades are fine, and a lot cheaper than what Makita would
have charged.
Luigi
Replace "nonet" with "yukonomics" for real email address
www.yukonomics.ca/wooddorking/antifaq.html
www.yukonomics.ca/wooddorking/humour.html