On Aug 25, 5:37=A0am, "Rob H." <[email protected]> wrote:
> I need some help with number 2332 in this set:
>
> http://55tools.blogspot.com/
>
> Rob
2330 - the inside of one of those outdoor DVD rental kiosks
2334- gas powered tamper
Dave
On Aug 24, 11:37=A0pm, "Rob H." <[email protected]> wrote:
> I need some help with number 2332 in this set:
>
> http://55tools.blogspot.com/
>
> Rob
2329. Mortising Machines for wood.
2333. Can openers.
2334. Handheld post driver?
Thanks
Karl
<[email protected]> wrote in message
news:5b5d2d01-3d57-4042-9449-4d127c2a4916@y39g2000prd.googlegroups.com...
On Aug 24, 11:37 pm, "Rob H." <[email protected]> wrote:
> I need some help with number 2332 in this set:
>
> http://55tools.blogspot.com/
>
> Rob
2329. Mortising Machines for wood.
2333. Can openers.
2334. Handheld post driver?
Thanks
Karl
2334 is a petrol or diesel powered tamper. once they are started bouncing by
hand, they take in a charge of fuel and air on the lifting stroke and
compress it on the down stroke. At bottom it is ignited and lifts itself
back up to take another stroke.
If you operate one of these all day you will be exhausted at the end of it.
Rob H. wrote the following:
>
> "Grrly Girl" <[email protected]> wrote in message
> news:[email protected]...
>>
>> "Rob H." <[email protected]> wrote in message
>> news:[email protected]...
>>> I need some help with number 2332 in this set:
>>>
>>> http://55tools.blogspot.com/
>>>
>>>
>>> Rob
>> 2332 looks sort of like a paper money pusher (into a slot in a safe).
>
>
> I think this is probably correct, someone had brought this to a tool
> collector's meeting and a couple people had guessed it was a money
> pusher but I haven't been able to prove it. Casinos use a money paddle
> but they're not made of metal, you might be right about this one being
> used for a safe.
>
>
How about from before plastic replaced metal in almost everything?
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeroes after @
"Rob H." <[email protected]> wrote in message
news:[email protected]...
>
>> 2331 Air pressure controller?
>
> It isn't a controller, this device is missing a magnifying lens that would
> fit over the large square hole.
Just a guess:
2331 This may be an electric eye. Perhaps it is a part of an alarm or
door opener. The cylinder contains a lamp and the square hole contains the
light sensitive receiver (or vice versa). The missing lens would either
focus or collimate the light. When used, the light from the lamp would
reflect off of a mirror (e.g., on the other side of a doorway) and shine on
the receiver. When the beam was broken, the electric eye would trigger
(sound an alarm, open a door, etc.).
Carl G.
Rob H. wrote:
> I need some help with number 2332 in this set:
>
> http://55tools.blogspot.com/
>
>
> Rob
2329 - Looks like a boring machine used to make the holes for wood
headstocks for livestock.
The left one roughs out the hole and the right one cleans out the
corners so the vertical board will swing freely.
2330 - DVD rental machine carousel
2331 -
2332 - Looks to be the right size to push money through a slot in a safe
or tellers counter.
2333 - The top one looks like a spool guide for a hand sewing awl.
2334 - gas powered tamping hammer. Basically a single cylinder engine
with a sliding piston instead of a crankshaft.
--
Steve W.
On Aug 25, 3:10=A0pm, "Rob H." <[email protected]> wrote:
> > 2331 Air pressure controller?
>
> It isn't a controller, this device is missing a magnifying lens that woul=
d
> fit over the large square hole.
>
Then it must be a Scan-O-Matic Coin Viewer .
"Rob H." <[email protected]> wrote in message
news:[email protected]...
>I need some help with number 2332 in this set:
>
> http://55tools.blogspot.com/
>
>
> Rob
2332 looks sort of like a paper money pusher (into a slot in a safe).
"Grrly Girl" <[email protected]> wrote in message
news:[email protected]...
>
> "Rob H." <[email protected]> wrote in message
> news:[email protected]...
>>I need some help with number 2332 in this set:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
> 2332 looks sort of like a paper money pusher (into a slot in a safe).
I think this is probably correct, someone had brought this to a tool
collector's meeting and a couple people had guessed it was a money pusher
but I haven't been able to prove it. Casinos use a money paddle but they're
not made of metal, you might be right about this one being used for a safe.
> "Rob H." <[email protected]> wrote in
> message news:[email protected]...
>>I need some help with number 2332 in this set:
>>
>> http://55tools.blogspot.com/
>>
2334 is a 'jumping jack' tamper.
"Phil Kangas" <[email protected]> wrote in message
news:[email protected]...
>
>
>> "Rob H." <[email protected]> wrote in message
>> news:[email protected]...
>>>I need some help with number 2332 in this set:
>>>
>>> http://55tools.blogspot.com/
>>>
>
> 2334 is a 'jumping jack' tamper.
Tamper is correct, foot crusher would be another good name for it.
<[email protected]> wrote in message
news:5b5d2d01-3d57-4042-9449-4d127c2a4916@y39g2000prd.googlegroups.com...
On Aug 24, 11:37 pm, "Rob H." <[email protected]> wrote:
> I need some help with number 2332 in this set:
>
> http://55tools.blogspot.com/
>
> Rob
>2329. Mortising Machines for wood.
Correct
>2333. Can openers.
Nope
"KentWalker" <[email protected]> wrote in message
news:[email protected]...
On Aug 25, 3:10 pm, "Rob H." <[email protected]> wrote:
> > 2331 Air pressure controller?
>
> It isn't a controller, this device is missing a magnifying lens that would
> fit over the large square hole.
>
>Then it must be a Scan-O-Matic Coin Viewer .
This is correct, it's for quickly inspecting a large number of coins.
"Dave__67" <[email protected]> wrote in message
news:0bbfd08b-3fbf-4f42-ac80-e2fcbd1b8e24@s12g2000yqm.googlegroups.com...
On Aug 25, 5:37 am, "Rob H." <[email protected]> wrote:
> I need some help with number 2332 in this set:
>
> http://55tools.blogspot.com/
>
> Rob
>2330 - the inside of one of those outdoor DVD rental kiosks
This is correct, the image on my site is a screen capture from a video that
can be seen at the answer for this one:
http://55tools.blogspot.com/2011/08/set-403.html#answers
Rob
On 2011-08-25, Rob H. <[email protected]> wrote:
> I need some help with number 2332 in this set:
>
> http://55tools.blogspot.com/
Posting from Rec.crafts.metalworking as always.
An intersting set this time around.
2329) Hmm ... two seemingly unrelated tools, other than that they
both clamp onto the edge of a board of a wide range of
thicknesses.
The one to the left is for drilling a hole parallel the sides
but at some setable angle to the vertical into the wood. Perhaps
for the sockets for uprights on a stair rail so the uprights are
truly upright.
The one to the right looks as though it can be used to move the
one to the left a fixed distance, such as to space the holes for
the uprights.
But -- it also may be driving two chisels to make a mortise for
a lock set in a door -- and the first would do the drilling to
make start on this.
The grey painted metal behind appears to be part of the support
of the table and not really a joining part of the other two, so
I will discount it.
2330) Part of a "library" for something. Calculating the height of
the individual sections based on the overall height, this may be
for selecting CDs or DVDs under computer control. Or it may be
for some kind of slide projector.
More detail of the items sliding into the radial slots would
help.
By "library" I mean like a tape library for backing up computer
systems, where the computer can ask for a specific tape to be
put into the drive, prior to making the backup or restoring from
it.
These don't look like tapes, and a bit too rigid for the 5-1/4"
floppies of earlier days.
2331) Maybe an ultrasonic cleaner? (Though I would expect a stainless
steel tank for that.
2332) Two possibilities come to mind.
1) A wedge to drive into the handle of an axe (probably
a double-bitted axe) to keep the head from working loose
and flying to endanger someone nearby.
2) A hull model intended to mount flush to a surface for
studying water flow around it.
2333) Can openers?
Grippers for Mason Jar lids?
2334) A gasoline powered fencepost driver?
It almost looks like a gasoline powered pogo stick which I once
saw, except that I don't see foot rests, just a hand grip, and a
socket for a single side lever. (Or is that an exhaust port?)
It also could be a dirt tamper, again gasoline powered.
I guess that to start it, you switch on the ignition, lift it
and drop it, after which it runs until you hti the lever
sticking out from the gray-painted guard.
Now to send this and see what others have suggested.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On 2011-08-25, Rob H. <[email protected]> wrote:
>
>> 2331 Air pressure controller?
>
> It isn't a controller, this device is missing a magnifying lens that would
> fit over the large square hole.
In that case -- a slide viewer (for 35mm or perhaps 2-1/4"
square slides).
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---