Some time ago was looking for input from the group about how best
to clean some BBQ grill grates.
Harbor Freight was the tool source and the results are in.
First a little background. The grill grates are cast iron complete
with a porcelainized coating.
For all you BBQ aficionados out there, those grates lay down
some mean grill marks.
The drill motors tested were an 18 VDC, 3/8" drill, and a 120VAC,
3,000 RPM, corded drill.
The brushes tested were an 80 grit, 3" dia, nylon abrasive, 1/4"
shank wheel and an 80 grit, 2" dia, nylon abrasive, 1/4" shank
cup brush.
Wire wheel and cup brushes were specifically excluded since they
might damage the porcelain coating.
The results.
The 18 VDC motor simply operated at too low and RPM to be effective
and it also did not store enough energy to get the job done.
The 120 VAC, 3,000 RPM was more than adequate for the task.
Either of the brushes got the job done, but I preferred the cup brush.
Took about half an hour to clean the grates and restore them to
factory finish.
Once cleaned, time for an in service test.
Just happened to have a rack of baby backs in the fridge, smothered
in dry rub for 48 hours, waiting for a hot grill.
That was also another great test.
Lew
On Mon, 13 Apr 2015 20:11:42 -0400, "G. Ross" <[email protected]>
wrote:
>Lew Hodgett wrote:
>> Some time ago was looking for input from the group about how best
>> to clean some BBQ grill grates.
>>
>> Harbor Freight was the tool source and the results are in.
>>
>> First a little background. The grill grates are cast iron complete
>> with a porcelainized coating.
>>
>>
>Would Easy-Off spray work? Probably not good on bare metal but on
>porcelain it possibly would dissolve the gunk.
Put them in a trash bag with a pint of ammonia. Come back the next
day and just rinse away the gunk.
On 04/13/2015 05:11 PM, G. Ross wrote:
> Lew Hodgett wrote:
>> Some time ago was looking for input from the group about how best
>> to clean some BBQ grill grates.
>>
>> Harbor Freight was the tool source and the results are in.
>>
>> First a little background. The grill grates are cast iron complete
>> with a porcelainized coating.
>>
>> For all you BBQ aficionados out there, those grates lay down
>> some mean grill marks.
>>
>> The drill motors tested were an 18 VDC, 3/8" drill, and a 120VAC,
>> 3,000 RPM, corded drill.
>>
>> The brushes tested were an 80 grit, 3" dia, nylon abrasive, 1/4"
>> shank wheel and an 80 grit, 2" dia, nylon abrasive, 1/4" shank
>> cup brush.
>>
>> Wire wheel and cup brushes were specifically excluded since they
>> might damage the porcelain coating.
>>
>> The results.
>>
>> The 18 VDC motor simply operated at too low and RPM to be effective
>> and it also did not store enough energy to get the job done.
>>
>> The 120 VAC, 3,000 RPM was more than adequate for the task.
>>
>> Either of the brushes got the job done, but I preferred the cup brush.
>>
>> Took about half an hour to clean the grates and restore them to
>> factory finish.
>>
>> Once cleaned, time for an in service test.
>>
>> Just happened to have a rack of baby backs in the fridge, smothered
>> in dry rub for 48 hours, waiting for a hot grill.
>>
>> That was also another great test.
>>
>> Lew
>>
>>
>>
> Would Easy-Off spray work? Probably not good on bare metal but on
> porcelain it possibly would dissolve the gunk.
>
I clean my cast iron cookware including BBQ cast iron grates (bare
metal) by putting them in the oven on self clean. They come out with
zero gunk, but a white ash coating. A little wire brush work and
reseasoning with several coats of flax oil and they look like they have
a porcelain finish.
I only do this if the seasoning breaks down and I can't get the gunk off
with a damp rag or a grill brush in the case of BBQ grates- maybe every
3-5 years.
Lew Hodgett wrote:
>> Some time ago was looking for input from the group about how best
>> to clean some BBQ grill grates.
<snip>
-------------------------------------------------
"G. Ross" wrote:
> Would Easy-Off spray work? Probably not good on bare metal but on
> porcelain it possibly would dissolve the gunk.
------------------------------------------------
Possibly, but can think of several reasons why I wouldn't want to try.
The gunk is basically semi dry carbon and chips away with relative
ease
which can then be swept up and tossed.
Easy-Off would create a wet mess making for an interesting clean up.
There is a lot of sheet metal in the area which could come in
accidental
contact with the Easy-Off.
Assume the grill grates would reach a high enough temperature to
totally oxidize any Easy-Off residue but I don't know.
Too many negatives for me.
Lew
"Lew Hodgett" <[email protected]> wrote in news:552c5975$0$44204
[email protected]:
*snip*
>
> Once cleaned, time for an in service test.
>
> Just happened to have a rack of baby backs in the fridge, smothered
> in dry rub for 48 hours, waiting for a hot grill.
>
> That was also another great test.
>
> Lew
>
>
>
Yum! Add some iced tea and maybe some sides of choice and you've got a
fantastic test!
I've got a some boneless country style pork ribs in the freezer. They're
just waiting for me to fire up the grill. I like to refer to them as
"food that makes you sorry you already ate dinner."
Puckdropper
--
Make it to fit, don't make it fit.
"Lew Hodgett" wrote:
>> Once cleaned, time for an in service test.
>>
>> Just happened to have a rack of baby backs in the fridge, smothered
>> in dry rub for 48 hours, waiting for a hot grill.
>>
>> That was also another great test.
-----------------------------------------------
"Puckdropper" wrote:
> Yum! Add some iced tea and maybe some sides of choice and you've
> got a
> fantastic test!
>
> I've got a some boneless country style pork ribs in the freezer.
> They're
> just waiting for me to fire up the grill. I like to refer to them
> as
> "food that makes you sorry you already ate dinner."
-------------------------------------------------------
If you're interested, contact me off list for my version of
"Lew's Country Ribs."
Easier to do in oven rather than grill unless you can hold your grill
in the 250F-275F range for 3-4 hours
Lew
"ChairMan" <[email protected]> wrote in news:NL2Xw.555434$Ak4.201673
@fx03.iad:
>
> 250-275?
> Not here in Tejas 200-225...low and slow, da only way to go
>: 0
>
In July, that's only a few degrees above air temperature. Just set it out
on the driveway. ;-)
Better make more than you need for the critters you don't want to scare
off... :-)
Puckdropper
--
Make it to fit, don't make it fit.
Lew Hodgett <[email protected]> wrote:
> "Lew Hodgett" wrote:
>
>>> Once cleaned, time for an in service test.
>>>
>>> Just happened to have a rack of baby backs in the
>>> fridge, smothered
>>> in dry rub for 48 hours, waiting for a hot grill.
>>>
>>> That was also another great test.
> -----------------------------------------------
>
>
> "Puckdropper" wrote:
>
>
>> Yum! Add some iced tea and maybe some sides of choice
>> and you've
>> got a
>> fantastic test!
>>
>> I've got a some boneless country style pork ribs in the
>> freezer.
>> They're
>> just waiting for me to fire up the grill. I like to
>> refer to them
>> as
>> "food that makes you sorry you already ate dinner."
> -------------------------------------------------------
> If you're interested, contact me off list for my version
> of
> "Lew's Country Ribs."
>
> Easier to do in oven rather than grill unless you can hold
> your grill
> in the 250F-275F range for 3-4 hours
>
> Lew
250-275?
Not here in Tejas 200-225...low and slow, da only way to go
: 0
Lew Hodgett wrote:
> Some time ago was looking for input from the group about how best
> to clean some BBQ grill grates.
>
> Harbor Freight was the tool source and the results are in.
>
> First a little background. The grill grates are cast iron complete
> with a porcelainized coating.
>
> For all you BBQ aficionados out there, those grates lay down
> some mean grill marks.
>
> The drill motors tested were an 18 VDC, 3/8" drill, and a 120VAC,
> 3,000 RPM, corded drill.
>
> The brushes tested were an 80 grit, 3" dia, nylon abrasive, 1/4"
> shank wheel and an 80 grit, 2" dia, nylon abrasive, 1/4" shank
> cup brush.
>
> Wire wheel and cup brushes were specifically excluded since they
> might damage the porcelain coating.
>
> The results.
>
> The 18 VDC motor simply operated at too low and RPM to be effective
> and it also did not store enough energy to get the job done.
>
> The 120 VAC, 3,000 RPM was more than adequate for the task.
>
> Either of the brushes got the job done, but I preferred the cup brush.
>
> Took about half an hour to clean the grates and restore them to
> factory finish.
>
> Once cleaned, time for an in service test.
>
> Just happened to have a rack of baby backs in the fridge, smothered
> in dry rub for 48 hours, waiting for a hot grill.
>
> That was also another great test.
>
> Lew
>
>
>
Would Easy-Off spray work? Probably not good on bare metal but on
porcelain it possibly would dissolve the gunk.
--
GW Ross
PEDICURE: Bicycle repair.
Lew Hodgett <[email protected]> wrote:
> "Lew Hodgett" wrote:
>
>>> Once cleaned, time for an in service test.
>>>
>>> Just happened to have a rack of baby backs in the
>>> fridge, smothered
>>> in dry rub for 48 hours, waiting for a hot grill.
>>>
>>> That was also another great test.
> -----------------------------------------------
>
>
> "Puckdropper" wrote:
>
>
>> Yum! Add some iced tea and maybe some sides of choice
>> and you've
>> got a
>> fantastic test!
>>
>> I've got a some boneless country style pork ribs in the
>> freezer.
>> They're
>> just waiting for me to fire up the grill. I like to
>> refer to them
>> as
>> "food that makes you sorry you already ate dinner."
> -------------------------------------------------------
> If you're interested, contact me off list for my version
> of
> "Lew's Country Ribs."
>
> Easier to do in oven rather than grill unless you can hold
> your grill
> in the 250F-275F range for 3-4 hours
>
> Lew
Oh and also use the 3 2 1 method
3 hours on smoker, 2 hrs in foil and the last hour unwrapped
on smoker