BillinGA <[email protected]> wrote:
> I bought one of these jigs and plenty of dovetails in oak, cherry, and
> walnut from Mr. Kehoe some 15-20 years back at the woodworking show in
> Atlanta. Just had to have it. It is still in the box (unused)along with
> the dovetails. Seems he was a cowboy type from Montana, Idaho, somewhere
> out that way... working the booth by himself. Delightful old fellow. You
> guys ever buy a tool on impulse?
Never! :-)
On Thu, 31 Oct 2013 22:23:22 -0400, Mike Marlow wrote:
> BillinGA wrote:
>
>> I bought one of these jigs and plenty of dovetails in oak, cherry,
>> and walnut from Mr. Kehoe some 15-20 years back at the woodworking
>> show in Atlanta. Just had to have it. It is still in the box
>> (unused)along with the dovetails. Seems he was a cowboy type from
>> Montana, Idaho, somewhere out that way... working the booth by
>> himself. Delightful old fellow. You guys ever buy a tool on impulse?
>
> When you do that it's not on impulse. It's just a tool you bought without
> having spent the time to realize how much you needed it.
>
> Dontchya just hate it though, when you buy something that you really believe
> you need - only to have it sit in the box for years! Not that I've ever
> done that myself...
I bought a biscuit joiner several years ago, a nice, handy machine that
has sat virtually unused for the entire time. I finally moved the box
where I wouldn't be reminded of it too often.
basilisk
woodchucker <[email protected]> wrote:
> On 11/2/2013 6:33 PM, [email protected] wrote:
>> On Fri, 01 Nov 2013 10:23:40 -0500, Swingman <[email protected]> wrote:
>>
>>> On 11/1/2013 10:11 AM, Leon wrote:
>>>> On 11/1/2013 9:39 AM, Swingman wrote:
>>>>> On 11/1/2013 9:33 AM, Sonny wrote:
>>>>>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>>>>>> I blame it all on Leon.
>>>>>>
>>>>>>> Could be, with claims floating around the internet that he is
>>>>>>> brutally handsome, .... basilisk
>>>>>>
>>>>>> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
>>>>>
>>>>>
>>>>> Meh ... Snopes? You don't need no steenking Snopes:
>>>>>
>>>>>
>>>>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>>>>>
>>>>>
>>>>>
>>>>> I would say, "devilishly", not "brutally". LOL
>>>>>
>>>>
>>>> Ahhhh. There's my partner, I still remember when we met on the
>>>> internet. ROTFL.
>>>
>>> Bawn jour!
>>
>> You're a French fashion model, too?
>>
>>
> I thought the same thing ... funny.
Good. That _is_ the joke.
--
www.ewoodshop.com (Mobile)
On Thursday, October 31, 2013 9:58:17 AM UTC-5, Michael wrote:
> On Thursday, October 31, 2013 9:28:46 AM UTC-5, Swingman wrote:
>
> > On 10/31/2013 12:40 AM, Michael wrote:
>
> >
>
> > > I notice there are a lot of videos demonstrating how to make straight splines using a 45 degree sled on a table saw. Is there any reason why this could not be done using a similar sled on a router table with a dovetail bit?
>
> >
>
> >
>
> >
>
> > These folks have closed down, but here is a video of jig that is well
>
> >
>
> > worth watching just to get some ideas for making your own router jig to
>
> >
>
> > do the same thing:
>
> >
>
> >
>
> >
>
> > http://www.dovetailspline.com/index.html
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > --
>
> >
>
> > eWoodShop: www.eWoodShop.com
>
> >
>
> > Wood Shop: www.e-WoodShop.net
>
> >
>
> > https://plus.google.com/114902129577517371552/posts
>
> >
>
> > http://www.custommade.com/by/ewoodshop/
>
> >
>
> > KarlCaillouet@ (the obvious)
>
>
>
> Just watched the video. Great jig, but they do want a little money for it. And they're closed.
This is what I'm after. http://lumberjocks.com/Toolz/blog/16320
Thanks.
No reason at all why you can't do this. You need to use care when making the jig so that the angle is exactly 45 or the splines won't fit. And of course, you'll need more care in making the splines than you would for a simple straight piece.
On Thursday, October 31, 2013 12:40:03 AM UTC-5, Michael wrote:
> I notice there are a lot of videos demonstrating how to make straight splines using a 45 degree sled on a table saw. Is there any reason why this could not be done using a similar sled on a router table with a dovetail bit?
I bought one of these jigs and plenty of dovetails in oak, cherry, and waln=
ut from Mr. Kehoe some 15-20 years back at the woodworking show in Atlanta.=
Just had to have it. It is still in the box (unused)along with the dovetai=
ls. Seems he was a cowboy type from Montana, Idaho, somewhere out that way.=
.. working the booth by himself. Delightful old fellow. You guys ever buy a=
tool on impulse?
On 10/31/2013 12:40 AM, Michael wrote:
> I notice there are a lot of videos demonstrating how to make straight splines using a 45 degree sled on a table saw. Is there any reason why this could not be done using a similar sled on a router table with a dovetail bit?
These folks have closed down, but here is a video of jig that is well
worth watching just to get some ideas for making your own router jig to
do the same thing:
http://www.dovetailspline.com/index.html
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
On Thu, 31 Oct 2013 12:27:11 -0400, "Mike Marlow"
>>> Just watched the video. Great jig, but they do want a little money
>>> for it. And they're closed.
You could read that two different ways. "And they're closed" could be
read as his agreeing with Karl. Agreed, interpreting it that way is
not what I'd call a common interpretation, but it certainly could be
read as such.
>
> No shit!!
>
>
>
> Did you bother to read my post? You're welcome, fuck you very much.
>
>
Calm down now. Maybe you need a cup of coffee or maybe you need much less coffee. We all know you provided him the answer. Apparently he just likes to ask rhetorical questions, ignore all responses and provide his own answer later.
On 11/1/2013 9:39 AM, Swingman wrote:
> On 11/1/2013 9:33 AM, Sonny wrote:
>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>> I blame it all on Leon.
>>
>>> Could be, with claims floating around the internet that he is
>>> brutally handsome, .... basilisk
>>
>> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
>
>
> Meh ... Snopes? You don't need no steenking Snopes:
>
>
> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>
>
> I would say, "devilishly", not "brutally". LOL
>
Ahhhh. There's my partner, I still remember when we met on the
internet. ROTFL.
On 10/31/2013 9:58 AM, Michael wrote:
> Just watched the video. Great jig, but they do want a little money for it. And they're closed.
No shit!!
Did you bother to read my post? You're welcome, fuck you very much.
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
On 11/1/2013 1:17 PM, Leon wrote:
> On 11/1/2013 10:23 AM, Swingman wrote:
>> On 11/1/2013 10:11 AM, Leon wrote:
>>> On 11/1/2013 9:39 AM, Swingman wrote:
>>>> On 11/1/2013 9:33 AM, Sonny wrote:
>>>>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>>>>> I blame it all on Leon.
>>>>>
>>>>>> Could be, with claims floating around the internet that he is
>>>>>> brutally handsome, .... basilisk
>>>>>
>>>>> Snopes.com doesn't have any reports (Yet!!), that the claims are
>>>>> false.
>>>>
>>>>
>>>> Meh ... Snopes? You don't need no steenking Snopes:
>>>>
>>>>
>>>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> I would say, "devilishly", not "brutally". LOL
>>>>
>>>
>>> Ahhhh. There's my partner, I still remember when we met on the
>>> internet. ROTFL.
>>
>> Bawn jour!
>>
>
>
> Barn Tour to you too!
Heahhh!
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
On 11/1/2013 6:07 PM, [email protected] wrote:
> On Fri, 01 Nov 2013 09:39:29 -0500, Swingman <[email protected]> wrote:
>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>> I would say, "devilishly", not "brutally". LOL
>
> Who is the cretin on the left? Looks like he's trying to capitalize on
> Leon's fame. :)
Au contraire ... I defer to my dealer on all matters.
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
In article <[email protected]>, [email protected]
says...
> On 11/1/2013 10:11 AM, Leon wrote:
> > On 11/1/2013 9:39 AM, Swingman wrote:
> >> On 11/1/2013 9:33 AM, Sonny wrote:
> >>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
> >>>>> I blame it all on Leon.
> >>>
> >>>> Could be, with claims floating around the internet that he is
> >>>> brutally handsome, .... basilisk
> >>>
> >>> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
> >>
> >>
> >> Meh ... Snopes? You don't need no steenking Snopes:
> >>
> >>
> >> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
> >>
> >>
> >>
> >> I would say, "devilishly", not "brutally". LOL
> >>
> >
> > Ahhhh. There's my partner, I still remember when we met on the
> > internet. ROTFL.
>
> Bawn jour!
Brawn jour?
On 11/2/2013 6:33 PM, [email protected] wrote:
> On Fri, 01 Nov 2013 10:23:40 -0500, Swingman <[email protected]> wrote:
>
>> On 11/1/2013 10:11 AM, Leon wrote:
>>> On 11/1/2013 9:39 AM, Swingman wrote:
>>>> On 11/1/2013 9:33 AM, Sonny wrote:
>>>>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>>>>> I blame it all on Leon.
>>>>>
>>>>>> Could be, with claims floating around the internet that he is
>>>>>> brutally handsome, .... basilisk
>>>>>
>>>>> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
>>>>
>>>>
>>>> Meh ... Snopes? You don't need no steenking Snopes:
>>>>
>>>>
>>>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>>>>
>>>>
>>>>
>>>> I would say, "devilishly", not "brutally". LOL
>>>>
>>>
>>> Ahhhh. There's my partner, I still remember when we met on the
>>> internet. ROTFL.
>>
>> Bawn jour!
>
> You're a French fashion model, too?
>
>
I thought the same thing ... funny.
--
Jeff
On Thursday, October 31, 2013 9:28:46 AM UTC-5, Swingman wrote:
> On 10/31/2013 12:40 AM, Michael wrote:
>
> > I notice there are a lot of videos demonstrating how to make straight splines using a 45 degree sled on a table saw. Is there any reason why this could not be done using a similar sled on a router table with a dovetail bit?
>
>
>
> These folks have closed down, but here is a video of jig that is well
>
> worth watching just to get some ideas for making your own router jig to
>
> do the same thing:
>
>
>
> http://www.dovetailspline.com/index.html
>
>
>
>
>
> --
>
> eWoodShop: www.eWoodShop.com
>
> Wood Shop: www.e-WoodShop.net
>
> https://plus.google.com/114902129577517371552/posts
>
> http://www.custommade.com/by/ewoodshop/
>
> KarlCaillouet@ (the obvious)
Just watched the video. Great jig, but they do want a little money for it. And they're closed.
> It's a common thing. Depending upon the length of the sliding dovetails,
>
> you may want to taper them, makes it much easier to assemble.
>
Yes typical sliding dovetails benefit from or even require a taper in one component or the other. For splines not so much because you will get gaps. However, chamfering the end of the key (male) piece can help to get it started
On 11/1/2013 9:33 AM, Sonny wrote:
> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>> I blame it all on Leon.
>
>> Could be, with claims floating around the internet that he is brutally handsome, .... basilisk
>
> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
Meh ... Snopes? You don't need no steenking Snopes:
https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
I would say, "devilishly", not "brutally". LOL
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
On Fri, 01 Nov 2013 09:12:50 -0400, [email protected] wrote:
> On Fri, 1 Nov 2013 07:17:40 -0500, basilisk <[email protected]>
>>I bought a biscuit joiner several years ago, a nice, handy machine that
>>has sat virtually unused for the entire time. I finally moved the box
>>where I wouldn't be reminded of it too often.
>
> What, if anything, did you use in lieu of the biscuit joiner? My
> biscuit joiner sat virtually unused for two years the moment I bought
> myself a Domino. Ended up selling the joiner for $50.
laps, dadoes,sometimes dowels, mortices cut with router, I tried to use
the
plate joiner but it just seemed too insubstantial to me.
>
> I blame it all on Leon.
Could be, with claims floating around the internet that he is
brutally handsome, he may be using his looks for salemanship.
basilisk
On Fri, 1 Nov 2013 07:17:40 -0500, basilisk <[email protected]>
>I bought a biscuit joiner several years ago, a nice, handy machine that
>has sat virtually unused for the entire time. I finally moved the box
>where I wouldn't be reminded of it too often.
What, if anything, did you use in lieu of the biscuit joiner? My
biscuit joiner sat virtually unused for two years the moment I bought
myself a Domino. Ended up selling the joiner for $50.
I blame it all on Leon.
On Sun, 03 Nov 2013 06:26:24 -0600, Swingman <[email protected]> wrote:
>woodchucker <[email protected]> wrote:
>> On 11/2/2013 6:33 PM, [email protected] wrote:
>>> On Fri, 01 Nov 2013 10:23:40 -0500, Swingman <[email protected]> wrote:
>>>
>>>> On 11/1/2013 10:11 AM, Leon wrote:
>>>>> On 11/1/2013 9:39 AM, Swingman wrote:
>>>>>> On 11/1/2013 9:33 AM, Sonny wrote:
>>>>>>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>>>>>>> I blame it all on Leon.
>>>>>>>
>>>>>>>> Could be, with claims floating around the internet that he is
>>>>>>>> brutally handsome, .... basilisk
>>>>>>>
>>>>>>> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
>>>>>>
>>>>>>
>>>>>> Meh ... Snopes? You don't need no steenking Snopes:
>>>>>>
>>>>>>
>>>>>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>>>>>>
>>>>>>
>>>>>>
>>>>>> I would say, "devilishly", not "brutally". LOL
>>>>>>
>>>>>
>>>>> Ahhhh. There's my partner, I still remember when we met on the
>>>>> internet. ROTFL.
>>>>
>>>> Bawn jour!
>>>
>>> You're a French fashion model, too?
>>>
>>>
>> I thought the same thing ... funny.
>
>Good. That _is_ the joke.
I thought people missed it. It works better if you didn't have to
explain it. ;-)
"Michael" <[email protected]> wrote in message
news:[email protected]
> I notice there are a lot of videos demonstrating how to
> make straight splines using a 45 degree sled on a table
> saw. Is there any reason why this could not be done using
> a similar sled on a router table with a dovetail bit?
It's a common thing. Depending upon the length of the sliding dovetails,
you may want to taper them, makes it much easier to assemble.
--
dadiOH
____________________________
Winters getting colder? Tired of the rat race?
Taxes out of hand? Maybe just ready for a change?
Check it out... http://www.floridaloghouse.net
Swingman wrote:
> On 10/31/2013 9:58 AM, Michael wrote:
>> Just watched the video. Great jig, but they do want a little money
>> for it. And they're closed.
>
> No shit!!
>
> Did you bother to read my post? You're welcome, fuck you very much.
Now Karl... you need to understand the art of communication. You had put
the statement that they were closed in the begining of your earlier post.
Clearly you do not understand that attention span is an issue today. How in
the hell do you expect people today to retain information from one sentence
to the next? You really have to come up to date...
--
-Mike-
[email protected]
[email protected] wrote:
> On Thu, 31 Oct 2013 12:27:11 -0400, "Mike Marlow"
>>>> Just watched the video. Great jig, but they do want a little money
>>>> for it. And they're closed.
>
> You could read that two different ways. "And they're closed" could be
> read as his agreeing with Karl. Agreed, interpreting it that way is
> not what I'd call a common interpretation, but it certainly could be
> read as such.
Don't attibute that reply to me Dave. Watch your attributes.
--
-Mike-
[email protected]
BillinGA wrote:
> I bought one of these jigs and plenty of dovetails in oak, cherry,
> and walnut from Mr. Kehoe some 15-20 years back at the woodworking
> show in Atlanta. Just had to have it. It is still in the box
> (unused)along with the dovetails. Seems he was a cowboy type from
> Montana, Idaho, somewhere out that way... working the booth by
> himself. Delightful old fellow. You guys ever buy a tool on impulse?
When you do that it's not on impulse. It's just a tool you bought without
having spent the time to realize how much you needed it.
Dontchya just hate it though, when you buy something that you really believe
you need - only to have it sit in the box for years! Not that I've ever
done that myself...
--
-Mike-
[email protected]
Leon wrote:
> On 11/1/2013 9:39 AM, Swingman wrote:
>> On 11/1/2013 9:33 AM, Sonny wrote:
>>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>>> I blame it all on Leon.
>>>
>>>> Could be, with claims floating around the internet that he is
>>>> brutally handsome, .... basilisk
>>>
>>> Snopes.com doesn't have any reports (Yet!!), that the claims are
>>> false.
>>
>>
>> Meh ... Snopes? You don't need no steenking Snopes:
>>
>>
>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>>
>>
>> I would say, "devilishly", not "brutally". LOL
>>
>
> Ahhhh. There's my partner, I still remember when we met on the
> internet. ROTFL.
GIFS????
--
-Mike-
[email protected]
On Fri, 01 Nov 2013 09:39:29 -0500, Swingman <[email protected]> wrote:
>https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>I would say, "devilishly", not "brutally". LOL
Who is the cretin on the left? Looks like he's trying to capitalize on
Leon's fame. :)
On 11/1/2013 10:23 AM, Swingman wrote:
> On 11/1/2013 10:11 AM, Leon wrote:
>> On 11/1/2013 9:39 AM, Swingman wrote:
>>> On 11/1/2013 9:33 AM, Sonny wrote:
>>>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>>>> I blame it all on Leon.
>>>>
>>>>> Could be, with claims floating around the internet that he is
>>>>> brutally handsome, .... basilisk
>>>>
>>>> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
>>>
>>>
>>> Meh ... Snopes? You don't need no steenking Snopes:
>>>
>>>
>>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>>>
>>>
>>>
>>>
>>> I would say, "devilishly", not "brutally". LOL
>>>
>>
>> Ahhhh. There's my partner, I still remember when we met on the
>> internet. ROTFL.
>
> Bawn jour!
>
Barn Tour to you too!
On Fri, 01 Nov 2013 10:23:40 -0500, Swingman <[email protected]> wrote:
>On 11/1/2013 10:11 AM, Leon wrote:
>> On 11/1/2013 9:39 AM, Swingman wrote:
>>> On 11/1/2013 9:33 AM, Sonny wrote:
>>>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>>>> I blame it all on Leon.
>>>>
>>>>> Could be, with claims floating around the internet that he is
>>>>> brutally handsome, .... basilisk
>>>>
>>>> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
>>>
>>>
>>> Meh ... Snopes? You don't need no steenking Snopes:
>>>
>>>
>>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>>>
>>>
>>>
>>> I would say, "devilishly", not "brutally". LOL
>>>
>>
>> Ahhhh. There's my partner, I still remember when we met on the
>> internet. ROTFL.
>
>Bawn jour!
You're a French fashion model, too?
On 11/1/2013 10:11 AM, Leon wrote:
> On 11/1/2013 9:39 AM, Swingman wrote:
>> On 11/1/2013 9:33 AM, Sonny wrote:
>>> On Friday, November 1, 2013 8:26:26 AM UTC-5, basilisk wrote:
>>>>> I blame it all on Leon.
>>>
>>>> Could be, with claims floating around the internet that he is
>>>> brutally handsome, .... basilisk
>>>
>>> Snopes.com doesn't have any reports (Yet!!), that the claims are false.
>>
>>
>> Meh ... Snopes? You don't need no steenking Snopes:
>>
>>
>> https://lh3.googleusercontent.com/-HzZmBNMQSS8/T5gwk0fANUI/AAAAAAAALco/qJ6OchIyYXc/w800-h600-no/Leon+and+Karl.jpg
>>
>>
>>
>> I would say, "devilishly", not "brutally". LOL
>>
>
> Ahhhh. There's my partner, I still remember when we met on the
> internet. ROTFL.
Bawn jour!
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)