Hello...
I am trying to source a pair (or two) of motor brushes for my 1972
vintage Montgomery Ward "Powr Kraft" Circular Saw.
The model number is TGB-8110A and the part number for the brushes("brush
& spring") is 718-838.
Would it help if someone knows who originally made this saw for Wards?
I've done a pretty thorough web search and it looks like I'm going to
have to rely on someone's personal knowledge & experience...
Thanks, Rob
"trainfan1" <[email protected]> wrote in message
news:[email protected]...
> Hello...
>
> I am trying to source a pair (or two) of motor brushes for my 1972
> vintage Montgomery Ward "Powr Kraft" Circular Saw.
>
> The model number is TGB-8110A and the part number for the brushes("brush
> & spring") is 718-838.
>
> Would it help if someone knows who originally made this saw for Wards?
>
> I've done a pretty thorough web search and it looks like I'm going to
> have to rely on someone's personal knowledge & experience...
>
You check this group?
If the source for other Powr Kraft (Power Craft for search) parts can't
help, it's time to go to a motor shop.
trainfan1 wrote:
> Hello...
>
> I am trying to source a pair (or two) of motor brushes for my 1972
> vintage Montgomery Ward "Powr Kraft" Circular Saw.
>
> The model number is TGB-8110A and the part number for the brushes("brush
> & spring") is 718-838.
>
> Would it help if someone knows who originally made this saw for Wards?
>
> I've done a pretty thorough web search and it looks like I'm going to
> have to rely on someone's personal knowledge & experience...
>
> Thanks, Rob
Remove the brushes yourself & take them to a good hardware store - might get a good enough match.
<<I am trying to source a pair (or two) of motor brushes for my 1972
vintage Montgomery Ward "Powr Kraft" Circular Saw.
The model number is TGB-8110A and the part number for the brushes("brush
& spring") is 718-838.
Would it help if someone knows who originally made this saw for Wards?>>
Try these guys: www.toolkraft.com . This company bought most of the
tooling and spare parts stock of the company that originally produced Powr
Kraft tools.
Lee
--
To e-mail, replace "bucketofspam" with "dleegordon"
Top poster Bob here.
I needed and found parts for a PowrKraft (Wards) RAS at www.toolkraft.com
They don't list parts online, but have a toll free number to call. My
experience was just grand. Hope yours is the same.
"trainfan1" <[email protected]> wrote in message
news:[email protected]...
> Hello...
>
> I am trying to source a pair (or two) of motor brushes for my 1972 vintage
> Montgomery Ward "Powr Kraft" Circular Saw.
>
> The model number is TGB-8110A and the part number for the brushes("brush &
> spring") is 718-838.
>
> Would it help if someone knows who originally made this saw for Wards?
>
> I've done a pretty thorough web search and it looks like I'm going to have
> to rely on someone's personal knowledge & experience...
>
> Thanks, Rob
: Toolkraft National Service and Parts Center - We offer service and parts
for Toolkraft, Darra James, Powerkraft
: for Montgomery Ward, and Duramark, (for T.Eaton) power tools. We are
located at:
: 352 Longhill Street
: Springfield, MA, 01108
: tel: 413-737-7331, fax 413-736-7701
: 9a.m. - 5p.m. EST Mon-Fri
: e-mail us at [email protected]
: We look forward to being your service and parts center!
I found this on the Web. It may be dated but give it a try.
"trainfan1" <[email protected]> wrote in message
news:[email protected]...
> Hello...
>
> I am trying to source a pair (or two) of motor brushes for my 1972 vintage
> Montgomery Ward "Powr Kraft" Circular Saw.
>
> The model number is TGB-8110A and the part number for the brushes("brush &
> spring") is 718-838.
>
> Would it help if someone knows who originally made this saw for Wards?
>
> I've done a pretty thorough web search and it looks like I'm going to have
> to rely on someone's personal knowledge & experience...
>
> Thanks, Rob