Delta 15-091 Drill Press - Anyone Own One?

Interesting, I have been told that I am almost identical to a Grizzly
in the quill area also.

On Feb 20, 6:12=A0am, "Joe AutoDrill" <[email protected]> wrote:
> >I have a 17-900 if that helps.
>
> Thanks for the offer. Appreciated!
>
> I've already got the specs on the 17-900 though.
>
> FYI if it matters to you and anyone else, the Delta 17-900 is the same ba=
sic
> machine (as far as the quill goes anyhow) as the following units also on =
the
> market:
>
> DAYTON 3Z917E, 3Z918, 3Z918F, 3Z993, 5Z146
> DELTA DP400, 17-900, 17-901, 17-950L, 17-959
> GRAINGER 3Z917E, 3Z918, 3Z918F, 3Z993, 5Z146
> GRIZZLY G7943 & G7944
> JET JDP-17MF
> PALMGREN 80153, 80154
>
> Some may be floor models and some bench models, some may have slightly
> larger or smaller motors than others, and some may be USA vs Canadian
> models... =A0but they all are almost identical in the quill area.
>
> Regards,
> Joe Agro, Jr.
> (800) 871-5022
> 01.908.542.0244
> Automatic / Pneumatic Drills:http://www.AutoDrill.com
> Multiple Spindle Drills:http://www.Multi-Drill.com
> Flagship Site:http://www.Drill-N-Tap.com
>
> V8013-R

>I have a 17-900 if that helps.

Thanks for the offer. Appreciated!

I've already got the specs on the 17-900 though.

FYI if it matters to you and anyone else, the Delta 17-900 is the same basic
machine (as far as the quill goes anyhow) as the following units also on the
market:

DAYTON 3Z917E, 3Z918, 3Z918F, 3Z993, 5Z146
DELTA DP400, 17-900, 17-901, 17-950L, 17-959
GRAINGER 3Z917E, 3Z918, 3Z918F, 3Z993, 5Z146
GRIZZLY G7943 & G7944
JET JDP-17MF
PALMGREN 80153, 80154

Some may be floor models and some bench models, some may have slightly
larger or smaller motors than others, and some may be USA vs Canadian
models... but they all are almost identical in the quill area.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

On Feb 19, 9:01=A0am, "Joe AutoDrill" <[email protected]> wrote:
> I need some physical measurements off of one. =A0Not available in the boo=
k or
> from Delta that I can find.
>
> If you have one and can operate a caliper, I'll owe you a big fat favor
> and/or send you a goodie from here if I have something you need within
> reason.
>
> (I would need manufacturer's blueprints and not just the part's drawings
> from Delta and they don't exactly want to give me that info.)
>
> Regards,
> Joe Agro, Jr.
> (800) 871-5022
> 01.908.542.0244
> Automatic / Pneumatic Drills:http://www.AutoDrill.com
> Multiple Spindle Drills:http://www.Multi-Drill.com
> Flagship Site:http://www.Drill-N-Tap.com
>
> V8013-R

I have a 17-900 if that helps.