I did a kitchen in Bamboo last February, and I used Teragren. They are
based in Bainbridge Island, Wash. I bought it from Brady Hardwoods in Kent,
Wash.
We used Verticle Grain Solid Stock Panel, Carmelized. NOTE: Understand the
diference between "Solid Stock Panel" and "Panel" before you order. 3/4" x
4' x 8' Solid Stock Panel ran about $275.00/ Sheet.
I ripped face frame stock out of the sheets and built face frames with
pocket screws.Worked Great!
I finished it with 4 coats M.L.Campbells Ultrastar Water-Born Satin lacquer.
The stuff is Heavy. It works easy, but it will burn if you hesitate. It
sands like a dream:
Good Luck! Woodson
"trvlnmny" <[email protected]> wrote in message
news:74789a90-da6a-4fd7-a952-cc55e39234ad@e67g2000hsa.googlegroups.com...
>I would like to try using bamboo. Does anyone have any experience with
> this?. What are the pros and cons?
> Where would I go to buy it?
> Thanks?