I got some barnwood, and I want to make a bookcase looking thing in my shop
to put my old timey items on. Problem is, where I cut across the old wood,
it exposes nice grain and color of hidden wood, and that doesn't go with the
grey of the weathered wood. I know I can router a groove and hide a lot of
it, but what do I do where I just can't hide it, and want it all to look
like it's been weathered evenly? Some type of acid? Common cleaner?
Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
TIA
Steve
On Feb 4, 10:41=A0pm, "Steve B" <[email protected]> wrote:
> I got some barnwood, and I want to make a bookcase looking thing in my sh=
op
> to put my old timey items on. =A0Problem is, where I cut across the old w=
ood,
> it exposes nice grain and color of hidden wood, and that doesn't go with =
the
> grey of the weathered wood. =A0I know I can router a groove and hide a lo=
t of
> it, but what do I do where I just can't hide it, and want it all to look
> like it's been weathered evenly? =A0Some type of acid? =A0Common cleaner?
> Vinegar? =A0I'd guess the wood is either cedar or pine, most probably pin=
e.
>
> TIA
>
> Steve
Years ago I made quite a few picture frames from grayed barnwood.
Some had several layers of wood built up to create different kinds of
decorative cross sections. I just tried to blend the grey with the
fresh to provide visual interest.
RonB
On Feb 4, 8:41=A0pm, "Steve B" <[email protected]> wrote:
> I got some barnwood, and I want to make a bookcase looking thing in my sh=
op
> to put my old timey items on. =A0Problem is, where I cut across the old w=
ood,
> it exposes nice grain and color of hidden wood, and that doesn't go with =
the
> grey of the weathered wood. =A0I know I can router a groove and hide a lo=
t of
> it, but what do I do where I just can't hide it, and want it all to look
> like it's been weathered evenly? =A0Some type of acid? =A0Common cleaner?
> Vinegar? =A0I'd guess the wood is either cedar or pine, most probably pin=
e.
>
> TIA
>
> Steve
Water and sun do this the fastest in nature. I seem to recall baking
soda in water will work for redwood fresh cuts. I keep meaning to try
it.
"Lee Michaels" wrote in message
news:[email protected]...
"Leon" wrote
>
> Slow but sure, exposure to sunlight. I will take about a year.
And if you are really creative..., you could create a little weather
chamber. sun, rain, wind, etc. I am certain that you could age those edges
on the boards in only 3 months! ;-)
===========================================================================
Of course, a good coat or two of paint will solve the problem.
On Sun, 05 Feb 2012 08:46:07 -0800, Larry Jaques
<[email protected]> wrote:
>On Sun, 05 Feb 2012 09:01:50 -0600, Leon <lcb11211@swbelldotnet>
>wrote:
>
>>On 2/4/2012 10:41 PM, Steve B wrote:
>>> I got some barnwood, and I want to make a bookcase looking thing in my shop
>>> to put my old timey items on. Problem is, where I cut across the old wood,
>>> it exposes nice grain and color of hidden wood, and that doesn't go with the
>>> grey of the weathered wood. I know I can router a groove and hide a lot of
>>> it, but what do I do where I just can't hide it, and want it all to look
>>> like it's been weathered evenly? Some type of acid? Common cleaner?
>>> Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
>>>
>>Slow but sure, exposure to sunlight. I will take about a year.
>
>UV lamps might speed that up a whole lot.
>
>http://tinyurl.com/7axe3rf More possibilities.
Bleach and a pressure washer will give you the texture
Cider Vinegar and steel wool will give you Ferrous Acetate? which
gives you a grey colour - particularly on oak and cedar which have a
higher Tannin or Tannic Acic content.
On 2/4/2012 10:41 PM, Steve B wrote:
> I got some barnwood, and I want to make a bookcase looking thing in my shop
> to put my old timey items on. Problem is, where I cut across the old wood,
> it exposes nice grain and color of hidden wood, and that doesn't go with the
> grey of the weathered wood. I know I can router a groove and hide a lot of
> it, but what do I do where I just can't hide it, and want it all to look
> like it's been weathered evenly? Some type of acid? Common cleaner?
> Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
>
> TIA
>
> Steve
>
>
Slow but sure, exposure to sunlight. I will take about a year.
Steve B wrote:
> I got some barnwood, and I want to make a bookcase looking thing in my
> shop
> to put my old timey items on. Problem is, where I cut across the old
> wood, it exposes nice grain and color of hidden wood, and that doesn't go
> with the
> grey of the weathered wood. I know I can router a groove and hide a lot
> of it, but what do I do where I just can't hide it, and want it all to
> look
> like it's been weathered evenly? Some type of acid? Common cleaner?
> Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
>
> TIA
>
> Steve
Steve, the easiest thing is to edge band the exposed wood with strips cut
from wood with the grey platina. There is a product called "Old Growth" and
here is a review of it
http://www.woodworking.org/WC/GArchive99/6_3oldgrowth.html
I have no idea if it is still available. I have some on hand but have not
used it in years. It will age the wood, but the finished product does not
look as good as the original and it changes the texture of the wood to the
touch.
If you were really wanting to hide the edges totally, cut a "V" groove and
your edge banding pieces to match and simply glue it up. Its a bit of work,
but you wind up with the edges that are exactly the same color as the rest
of the case.
Enjoy
Deb
In article <446b693e-dc3c-4271-b411-
[email protected]>, [email protected] says...
>
> On Feb 4, 8:41 pm, "Steve B" <[email protected]> wrote:
> > I got some barnwood, and I want to make a bookcase looking thing in my shop
> > to put my old timey items on. Problem is, where I cut across the old wood,
> > it exposes nice grain and color of hidden wood, and that doesn't go with the
> > grey of the weathered wood. I know I can router a groove and hide a lot of
> > it, but what do I do where I just can't hide it, and want it all to look
> > like it's been weathered evenly? Some type of acid? Common cleaner?
> > Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
> >
> > TIA
> >
> > Steve
>
> Water and sun do this the fastest in nature. I seem to recall baking
> soda in water will work for redwood fresh cuts. I keep meaning to try
> it.
FWIW, Minwax Dark Walnut is a surprisingly close match to aged barn wood
(aged inside the barn that is). Did some repairs on a 150 year old barn
last year and put that on them and they blended right in.
On Sun, 05 Feb 2012 09:01:50 -0600, Leon <lcb11211@swbelldotnet>
wrote:
>On 2/4/2012 10:41 PM, Steve B wrote:
>> I got some barnwood, and I want to make a bookcase looking thing in my shop
>> to put my old timey items on. Problem is, where I cut across the old wood,
>> it exposes nice grain and color of hidden wood, and that doesn't go with the
>> grey of the weathered wood. I know I can router a groove and hide a lot of
>> it, but what do I do where I just can't hide it, and want it all to look
>> like it's been weathered evenly? Some type of acid? Common cleaner?
>> Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
>>
>Slow but sure, exposure to sunlight. I will take about a year.
UV lamps might speed that up a whole lot.
http://tinyurl.com/7axe3rf More possibilities.
--
Energy and persistence alter all things.
--Benjamin Franklin
On Sun, 05 Feb 2012 09:01:50 -0600, Leon <lcb11211@swbelldotnet>
>Slow but sure, exposure to sunlight. I will take about a year.
I built a bar once for a friend who wanted it made out of barn wood.
For the exposed edges, I browned (not blackened) them with a propane
torch. Surprisingly, it turned out looking pretty good.
On Feb 4, 11:41=A0pm, "Steve B" <[email protected]> wrote:
> I got some barnwood, and I want to make a bookcase looking thing in my sh=
op
> to put my old timey items on. =A0Problem is, where I cut across the old w=
ood,
> it exposes nice grain and color of hidden wood, and that doesn't go with =
the
> grey of the weathered wood. =A0I know I can router a groove and hide a lo=
t of
> it, but what do I do where I just can't hide it, and want it all to look
> like it's been weathered evenly? =A0Some type of acid? =A0Common cleaner?
> Vinegar? =A0I'd guess the wood is either cedar or pine, most probably pin=
e.
>
> TIA
>
> Steve
I built a fireplace surround for a lady with old barnwood and I used
gray primer and red primer and brown paint to blend it all in. These
were all spray paints out of a can. The wood I was using was eastern
hemlock and the end result was pretty cool. Gray was the last color..
RP
On Sun, 05 Feb 2012 16:25:39 -0500, [email protected] wrote:
>On Sun, 05 Feb 2012 08:46:07 -0800, Larry Jaques
><[email protected]> wrote:
>
>>On Sun, 05 Feb 2012 09:01:50 -0600, Leon <lcb11211@swbelldotnet>
>>wrote:
>>
>>>On 2/4/2012 10:41 PM, Steve B wrote:
>>>> I got some barnwood, and I want to make a bookcase looking thing in my shop
>>>> to put my old timey items on. Problem is, where I cut across the old wood,
>>>> it exposes nice grain and color of hidden wood, and that doesn't go with the
>>>> grey of the weathered wood. I know I can router a groove and hide a lot of
>>>> it, but what do I do where I just can't hide it, and want it all to look
>>>> like it's been weathered evenly? Some type of acid? Common cleaner?
>>>> Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
>>>>
>>>Slow but sure, exposure to sunlight. I will take about a year.
>>
>>UV lamps might speed that up a whole lot.
>>
>>http://tinyurl.com/7axe3rf More possibilities.
> Bleach and a pressure washer will give you the texture
>Cider Vinegar and steel wool will give you Ferrous Acetate? which
>gives you a grey colour - particularly on oak and cedar which have a
>higher Tannin or Tannic Acic content.
Someone once said lye will do it, with a vinegar neutralizer.
--
Energy and persistence alter all things.
--Benjamin Franklin
On 2/4/2012 10:41 PM, Steve B wrote:
> I got some barnwood, and I want to make a bookcase looking thing in my shop
> to put my old timey items on. Problem is, where I cut across the old wood,
> it exposes nice grain and color of hidden wood, and that doesn't go with the
> grey of the weathered wood. I know I can router a groove and hide a lot of
> it, but what do I do where I just can't hide it, and want it all to look
> like it's been weathered evenly? Some type of acid? Common cleaner?
> Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
...
Well, it shouldn't be hard to determine whether it's cedar as opposed to
pine... :)
Poster Dr Deb pointed to one way; w/ some effort you could, providing
you have enough material, even make end grain banding for the exposed
ends as suggested there.
Depending on just what you're making and after, an alternative would be
to miter the corners to avoid having any exposed ends on the external
casework/carcase.
--
On Sat, 4 Feb 2012 20:41:57 -0800, "Steve B" <[email protected]> wrote:
>it, but what do I do where I just can't hide it, and want it all to look
>like it's been weathered evenly? Some type of acid? Common cleaner?
>Vinegar? I'd guess the wood is either cedar or pine, most probably pine.
Barnwood Effects in Painting
http://www.ehow.com/info_8678791_barnwood-effects-painting.html