"dmiale" <[email protected]> wrote in message
news:Z4zib.78214$0Z5.22706@lakeread03...
> I want to mount my saw on casters and I'm wondering what type would work
> best with a Delta Model 34-670 table saw. There is only one bolt hole in
the
> base of each "leg". Thanks
>
>
Make a wooden frame of 2 x 4's, using half lap joints at the corners, then
mount the castors on that. The reason I suggest that, is, the legs are too
flexible, and need to be stabilized.
--
Jim in NC