Below are some items that were sent in to me, I know the answer for number
11 but not for the other two.
10. This was found in a graveyard, it's about 3-1/4" long, it has three
threaded compartments with a lid, two compartments were full of grease.
http://img.photobucket.com/albums/v80/harnett65/Album11/pic10.jpg
http://img.photobucket.com/albums/v80/harnett65/Album11/pic10a.jpg
http://img.photobucket.com/albums/v80/harnett65/Album11/pic10b.jpg
11. Two different items that were submitted, both with the same purpose:
http://img.photobucket.com/albums/v80/harnett65/Album11/pic11.jpg
http://img.photobucket.com/albums/v80/harnett65/Album11/pic11a.jpg
12. The owner's description: It's made of solid brass, approx. 1" long,
3/4" tall, 3/4" deep, had 2 small brass risers approx. 1/8" diameter, with
sliding stainless steel rod inserted through left brass riser with set screw
to hold in place, small stainless steel rod affixed in right riser, small
hooked cutting blade with adjusting screw mounted on rear of device.
http://img.photobucket.com/albums/v80/harnett65/Album11/pic12.jpg
On Aug 14, 11:08=A0am, "Rob H." <[email protected]> wrote:
> 10. This was found in a graveyard, it's about 3-1/4" long, it has three
> threaded compartments with a lid
I'd guess a maintenance kit for an outdoor item; probably
a rifle or shotgun, which has a compartment in the stock to clip
this little gizmo in place
> 12. =A0The owner's description: It's made of solid brass...
> hooked cutting blade with adjusting screw mounted on rear
Maybe a holder for spooling thread onto a bobbin? The hooked
blade would be used to snip the thread when you have enough
On Sat, 14 Aug 2010 14:08:18 -0400, "Rob H." <[email protected]> wrote:
>Below are some items that were sent in to me, I know the answer for number
>11 but not for the other two.
>
>
>10. This was found in a graveyard, it's about 3-1/4" long, it has three
>threaded compartments with a lid, two compartments were full of grease.
>http://img.photobucket.com/albums/v80/harnett65/Album11/pic10.jpg
>
>http://img.photobucket.com/albums/v80/harnett65/Album11/pic10a.jpg
>
>http://img.photobucket.com/albums/v80/harnett65/Album11/pic10b.jpg
>
>
>
>11. Two different items that were submitted, both with the same purpose:
>http://img.photobucket.com/albums/v80/harnett65/Album11/pic11.jpg
>
>http://img.photobucket.com/albums/v80/harnett65/Album11/pic11a.jpg
>
>
>
>12. The owner's description: It's made of solid brass, approx. 1" long,
>3/4" tall, 3/4" deep, had 2 small brass risers approx. 1/8" diameter, with
>sliding stainless steel rod inserted through left brass riser with set screw
>to hold in place, small stainless steel rod affixed in right riser, small
>hooked cutting blade with adjusting screw mounted on rear of device.
>http://img.photobucket.com/albums/v80/harnett65/Album11/pic12.jpg
10 looks like choke tubes for a Shot Gun ( are they marked full, mod
or improved?)
Dave
On Aug 15, 10:34=A0pm, John Husvar <[email protected]> wrote:
> In article <[email protected]>,
> =A0William Bagwell <[email protected]> wrote:
>
> > On Sun, 15 Aug 2010 04:56:13 -0400, "Rob H." <[email protected]> wrote:
>
> > >> 11 is a marrow scoop.
> > >> EdR
>
> > >Nope, that one looks more like a long thin spoon.
>
> > Watermelon?
>
> Grapefruit spoon?
Nah, those are marrow spoons
--riverman
Guessing:
10 - Maybe part of an old (since it isn't decorative) swing-bar
assembly of a casket handle, that, for some reason, has been removed,
broke off, fell off?
http://www.geneva-mfg.com/swing/tigeren.gif
Googling "casket hardware" ---> sites ---> several pics of various
hardware with somewhat similar (?) round/rod parts: Tips,
escutcheons, hinge caps, but nothing exactly as pictured in the
initial post. http://sterlingcaskethardware.com/products8.php
Sonny
Rob H. wrote:
> Below are some items that were sent in to me, I know the answer for
> number 11 but not for the other two.
>
>
> 10. This was found in a graveyard, it's about 3-1/4" long, it has three
> threaded compartments with a lid, two compartments were full of grease.
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10a.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10b.jpg
>
>
>
> 11. Two different items that were submitted, both with the same purpose:
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic11.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic11a.jpg
>
>
>
> 12. The owner's description: It's made of solid brass, approx. 1" long,
> 3/4" tall, 3/4" deep, had 2 small brass risers approx. 1/8" diameter,
> with sliding stainless steel rod inserted through left brass riser with
> set screw to hold in place, small stainless steel rod affixed in right
> riser, small hooked cutting blade with adjusting screw mounted on rear
> of device.
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic12.jpg
12 is probably used in clock wheel repair work; I'm assuming that there
are holes in the pointed ends of the rods. The hook is for securing
the wheel in one position while work is being done at one part of the
wheel.
On Sun, 15 Aug 2010 04:56:13 -0400, "Rob H." <[email protected]> wrote:
>> 11 is a marrow scoop.
>> EdR
>
>
>Nope, that one looks more like a long thin spoon.
Watermelon?
--
William
In article <[email protected]>, "Rob H." <[email protected]> wrote:
>11. Two different items that were submitted, both with the same purpose:
>http://img.photobucket.com/albums/v80/harnett65/Album11/pic11.jpg
>
>http://img.photobucket.com/albums/v80/harnett65/Album11/pic11a.jpg
Apple corers.
>> 12. The owner's description: It's made of solid brass, approx. 1" long,
>> 3/4" tall, 3/4" deep, had 2 small brass risers approx. 1/8" diameter,
>> with sliding stainless steel rod inserted through left brass riser with
>> set screw to hold in place, small stainless steel rod affixed in right
>> riser, small hooked cutting blade with adjusting screw mounted on rear
>> of device.
>> http://img.photobucket.com/albums/v80/harnett65/Album11/pic12.jpg
>
> 12 is probably used in clock wheel repair work; I'm assuming that there
> are holes in the pointed ends of the rods. The hook is for securing
> the wheel in one position while work is being done at one part of the
> wheel.
I sent an email to the owner of it asking if there are holes in the pointed
rods but haven't heard back yet.
Others have guessed apple corer and chemist scoop for number 11, neither of
these is correct although the word scoop is part of the right answer.
Rob
"Sonny" <[email protected]> wrote in message
news:b2a8bdd1-6786-4f8c-b548-f48798a5a7bb@z10g2000yqb.googlegroups.com...
> Seems I've seem a similar item as the second pic in # 11. After
> further consideration: maybe a dining utensil- for tea, sugar, salt?
> -, but it seems I've seen a similar item on a lady's dressing table...
> part of a manicure set.... I just don't recall.
>
> Sonny
Your first guess is closer, it's for use at the table but not for tea, sugar
or salt.
Rob H. wrote:
>
> "Sonny" <[email protected]> wrote in message
> news:b2a8bdd1-6786-4f8c-b548-f48798a5a7bb@z10g2000yqb.googlegroups.com...
>> Seems I've seem a similar item as the second pic in # 11. After
>> further consideration: maybe a dining utensil- for tea, sugar, salt?
>> -, but it seems I've seen a similar item on a lady's dressing table...
>> part of a manicure set.... I just don't recall.
>>
>> Sonny
>
> Your first guess is closer, it's for use at the table but not for tea,
> sugar or salt.
Similar items are called cheese scoops, but some made about 1805 were
called butter scoops.
"J Burns" <[email protected]> wrote in message
news:[email protected]...
> Rob H. wrote:
>>
>> "Sonny" <[email protected]> wrote in message
>> news:b2a8bdd1-6786-4f8c-b548-f48798a5a7bb@z10g2000yqb.googlegroups.com...
>>> Seems I've seem a similar item as the second pic in # 11. After
>>> further consideration: maybe a dining utensil- for tea, sugar, salt?
>>> -, but it seems I've seen a similar item on a lady's dressing table...
>>> part of a manicure set.... I just don't recall.
>>>
>>> Sonny
>>
>> Your first guess is closer, it's for use at the table but not for tea,
>> sugar or salt.
>
> Similar items are called cheese scoops, but some made about 1805 were
> called butter scoops.
Cheese scoops is correct, more specifically stilton cheese scoops, as seen
in these images:
http://www.google.com/images?um=1&hl=en&rlz=1B3GGGL_enUS228US228&biw=1296&bih=620&tbs=isch%3A1&sa=1&q=%22stilton+cheese+scoop%22&btnG=Search&aq=f&aqi=&aql=&oq=&gs_rfai=
Concerning the mold from Thursday's set, the owner of it said he will try to
cast a piece from it with either babbet or solder. Not sure if he has a
digital camera or not, if so I'll see if he can send some photos.
Rob
> 10 looks like choke tubes for a Shot Gun ( are they marked full, mod
> or improved?)
I asked the owner about text on it, here is the reply:
"The top third has the letters "Chr" on it - what I would call old school
writing loopy with the 'r' done the way the French would do it. The second
third looks like it has "lat" on it and the last third looks like 'Info' -
all a bit strange."
Also I should mention that these photos were sent in from England.
Rob
"John Husvar" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>,
> William Bagwell <[email protected]> wrote:
>
>> On Sun, 15 Aug 2010 04:56:13 -0400, "Rob H." <[email protected]> wrote:
>>
>> >> 11 is a marrow scoop.
>> >> EdR
>> >
>> >
>> >Nope, that one looks more like a long thin spoon.
>>
>> Watermelon?
>
> Grapefruit spoon?
has one serrated edge
>> 12. The owner's description: It's made of solid brass, approx. 1" long,
>> 3/4" tall, 3/4" deep, had 2 small brass risers approx. 1/8" diameter,
>> with sliding stainless steel rod inserted through left brass riser with
>> set screw to hold in place, small stainless steel rod affixed in right
>> riser, small hooked cutting blade with adjusting screw mounted on rear
>> of device.
>> http://img.photobucket.com/albums/v80/harnett65/Album11/pic12.jpg
>
> 12 is probably used in clock wheel repair work; I'm assuming that there
> are holes in the pointed ends of the rods. ..
I heard back from the owner of this device, they said that the ends of the
rods are sharp points.
Rob
In article <[email protected]>,
William Bagwell <[email protected]> wrote:
> On Sun, 15 Aug 2010 04:56:13 -0400, "Rob H." <[email protected]> wrote:
>
> >> 11 is a marrow scoop.
> >> EdR
> >
> >
> >Nope, that one looks more like a long thin spoon.
>
> Watermelon?
Grapefruit spoon?
On 2010-08-14, Rob H. <[email protected]> wrote:
> Below are some items that were sent in to me, I know the answer for number
> 11 but not for the other two.
>
>
> 10. This was found in a graveyard, it's about 3-1/4" long, it has three
> threaded compartments with a lid, two compartments were full of grease.
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10a.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10b.jpg
Hmm ... two full of grease -- both the same type, or some
difference between them? And the third was totally empty and clean?
At a guess, it could have been a portable maintenance kit for
something with bearings. Knowing more about the types of grease might
help.
> 11. Two different items that were submitted, both with the same purpose:
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic11.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic11a.jpg
For planting seeds or small bulbs?
> 12. The owner's description: It's made of solid brass, approx. 1" long,
> 3/4" tall, 3/4" deep, had 2 small brass risers approx. 1/8" diameter, with
> sliding stainless steel rod inserted through left brass riser with set screw
> to hold in place, small stainless steel rod affixed in right riser, small
> hooked cutting blade with adjusting screw mounted on rear of device.
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic12.jpg
Terrible photo.
Given that the hooked device is described as a blade of some
sort, it is some kind of minimal hand-powered lathe. At a guess, for
truing the wheels for something like the wooden block race cars made by
scouts and the like. (I forget the name of these cars but they are
fairly common at certain times of the year.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Rob H. wrote:
> Below are some items that were sent in to me, I know the answer for
> number 11 but not for the other two.
>
>
> 10. This was found in a graveyard, it's about 3-1/4" long, it has three
> threaded compartments with a lid, two compartments were full of grease.
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10a.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic10b.jpg
>
>
>
> 11. Two different items that were submitted, both with the same purpose:
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic11.jpg
>
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic11a.jpg
>
>
>
> 12. The owner's description: It's made of solid brass, approx. 1" long,
> 3/4" tall, 3/4" deep, had 2 small brass risers approx. 1/8" diameter,
> with sliding stainless steel rod inserted through left brass riser with
> set screw to hold in place, small stainless steel rod affixed in right
> riser, small hooked cutting blade with adjusting screw mounted on rear
> of device.
> http://img.photobucket.com/albums/v80/harnett65/Album11/pic12.jpg
11 is a marrow scoop.
EdR