"sewiv" <[email protected]> wrote in message
news:[email protected]...
>
> R.H. wrote:
> > The latest set has just been posted:
> >
> > http://puzzlephotos.blogspot.com/
>
> 491: Clock winding key
> 494: a hearing aid of some kind?
It's not a hearing aid, but it does get hooked over the right ear.
Rob
I know what #490 is....sort of. I think I remember the 'feel' of using
something like it once, but maybe I'm wrong and just generating some
sort of false memory.
Its a wrench handle, but as you see the inner hole is flared. The
wrench slips onto a tapered bolt, and the tab at the top slips under a
little lip, so that when the wrench is turned, it cannot be removed
from the nut. The bolt head is tapered so that normal wrenches will pop
off and not work. Even a socket won't do it; it has to have this little
tab to hold it down on the bolt. Maybe I'm thinking of a gas valve
handle...
#491 Now THAT looks like the top to a pressure cooker.
#494 A trigger guard?
--humunculus
R.H. wrote:
> "sewiv" <[email protected]> wrote in message
> news:[email protected]...
> >
> > R.H. wrote:
> > > The latest set has just been posted:
> > >
> > > http://puzzlephotos.blogspot.com/
> >
> > 491: Clock winding key
> > 494: a hearing aid of some kind?
>
> It's not a hearing aid, but it does get hooked over the right ear.
Is it one of those "sleepy driver" alarms? Sounds when you nod off?
Or some sort of bizarre hands-free flashlight?
--
Sandy
#490: Is the little tab twisted in such a way that it would follow a
threaded slot, or is is just a flat tab? A closeup of the tab, and
another of the flat side of the handle, might be helpful. I'm wondering
if that handle wasn't one of a pair that butted against each other.
#491: Again, a closeup of the top and the bottom lip would be helpful.
If it were used as a 'screwdriver' at any time, I think the top piece
might show some wear, and would also be <very> precisely cut to have
parallel sides, something that a decorative piece would not have. I
know there were/are many devices that require a coin to turn the screw,
so this could easily be a coin-shaped driver that mounted on a stick.
But as such, I think it would have popped out of the screw head
occasionally and left some markings.
--humunculus
R.H. <[email protected]> wrote:
> 495. No correct answer yet
495 is for poking holes into wall paper. If you want to remove wallpaper
you have to whetten it. The holes you poke in with that useless tool
should help penetrating the wall paper with water.
Nick
--
Motor Modelle // Engine Models
http://www.motor-manufaktur.de
495. This is a carpet layers roller, used to disguise seams.
(top posted for your convenience)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"Norman D. Crow" <[email protected]> wrote in message
news:[email protected]...
>
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
>> The latest set has just been posted:
>>
>> http://puzzlephotos.blogspot.com/
>>
>>
>
> 490 ? If it's a wrench, made for square nuts/bolts.
> Projection on right; Hook a loop of wire/string and stretch it
> over a hook/peg/etc. ?
>
> 491 Reminds me of a window opener for those high windows in
> old schools. Goes on the end of a wood pole to reach up to
> latches, but the ones I remember had a hook on the end.
>
> 492 Binoculars
>
> 493 Didn't I just see this a while back? Or somewhere else(?)
> Someone suggested a portable cigar humidor.
>
> 494 ??
>
> 495 Seems like something to do with baking, but ? Secret tool
> used by "antique" creators for distressing wood?
>
> --
> Nahmie
> Stupidity is not considered a handicap, park elsewhere.
>
>
"R.H." <[email protected]> wrote in message
news:[email protected]...
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
491. looks like it could be a brass finial for the top of a ceremonial flag
or "standard".
--
Regards - Jim
"humunculus" <[email protected]> wrote in message
news:[email protected]...
> #490: Is the little tab twisted in such a way that it would follow a
> threaded slot, or is is just a flat tab? A closeup of the tab, and
> another of the flat side of the handle, might be helpful. I'm wondering
> if that handle wasn't one of a pair that butted against each other.
I shot a couple more photos of this wrench showing the bottom and the tab:
http://img.photobucket.com/albums/v80/harnett65/Album%203/pic490a.jpg
http://img.photobucket.com/albums/v80/harnett65/Album%203/pic490b.jpg
The taper on the star shaped hole is very slight, maybe 1/32".
>
> #491: Again, a closeup of the top and the bottom lip would be helpful.
> If it were used as a 'screwdriver' at any time, I think the top piece
> might show some wear, and would also be <very> precisely cut to have
> parallel sides, something that a decorative piece would not have. I
> know there were/are many devices that require a coin to turn the screw,
> so this could easily be a coin-shaped driver that mounted on a stick.
> But as such, I think it would have popped out of the screw head
> occasionally and left some markings.
And a few more of this one, I don't see very much wear that would indicate
it being used as a tool:
http://img.photobucket.com/albums/v80/harnett65/Album%203/pic491a.jpg
http://img.photobucket.com/albums/v80/harnett65/Album%203/pic491b.jpg
http://img.photobucket.com/albums/v80/harnett65/Album%203/pic491c.jpg
There is a taper on the end, going from 3/16" to 1/8" at the tip.
Rob
R.H. said:
>"sewiv" <[email protected]> wrote in message
>> Is it one of those "sleepy driver" alarms? Sounds when you nod off?
>>
>This answer is correct. Part II of this one is to determine what mechanism
>activates the alarm as the driver is falling asleep.
A rolling ball and electrical contacts or a mercury switch - either
would work.
Greg G.
On Fri, 28 Oct 2005 19:13:11 GMT, "R.H." <[email protected]> wrote:
>
>"R.H." <[email protected]> wrote in message
>news:[email protected]...
>> The latest set has just been posted:
>>
>> http://puzzlephotos.blogspot.com/
>>
>
>
>
>Results so far:
>
>
>
>490. Not sure exactly what this wrench was made for, and haven't been able
>to confirm the function of the small piece on the end.
>
>491. The seller of this one thought that it was mounted on the end of a
>pole for reaching a slot to turn a machine on or off. I showed it to a guy
>who has been selling tools for over forty years and he seemed sure that it
>was a decorative piece from a fancy horse drawn carriage. Haven't found any
>info to verify this one yet either.
>
There's a chance that it was used to turn old style ceiling fans on
and off. The really old fans had switches in the central hub that took
a tool along these lines to turn on and off.
>493. Binocular focus wheel
>
>494. Cigar travel humidor
>
>495. No correct answer yet
>
>496. Carpet seam roller
>
>
>
>Rob
>
>
>
>
Wayne Cook
Shamrock, TX
http://members.dslextreme.com/users/waynecook/index.htm
"R.H." <[email protected]> wrote in message
news:[email protected]...
>
> "sewiv" <[email protected]> wrote in message
> news:[email protected]...
>>
>> Is it one of those "sleepy driver" alarms? Sounds when you nod off?
>
> This answer is correct. Part II of this one is to determine what
> mechanism activates the alarm as the driver is falling asleep.
What activates the alarm is when the head tilts down as the driver nods off.
What SHOULD activate the alarm is the simple act of hooking it onto your
ear. If you're so tired that you have to use this device to keep you awake,
then you're already too tired to be driving.
In article <[email protected]>,
"R.H." <[email protected]> wrote:
>The latest set has just been posted:
>
>http://puzzlephotos.blogspot.com/
>
>
>Rob
Hah! My reader's been killfiling these because they have XXX in the
title. Fixed now.
490. Mute button for pipes.
491. Carrot sharpener--shavings come out the small hole.
492. Panty examination scope.
493. That's a thing. It's used for stuff.
494. A hook with an off switch.
495. Ingenious device to torture a whole lot of small animals at once.
--
B.B. --I am not a goat! thegoat4 at airmail dot net
"sewiv" <[email protected]> wrote in message
news:[email protected]...
>
> R.H. wrote:
> > "sewiv" <[email protected]> wrote in message
> > news:[email protected]...
> > >
> > > R.H. wrote:
> > > > The latest set has just been posted:
> > > >
> > > > http://puzzlephotos.blogspot.com/
> > >
> > > 491: Clock winding key
> > > 494: a hearing aid of some kind?
> >
> > It's not a hearing aid, but it does get hooked over the right ear.
>
> Is it one of those "sleepy driver" alarms? Sounds when you nod off?
>
This answer is correct. Part II of this one is to determine what mechanism
activates the alarm as the driver is falling asleep.
Rob
"Nick Müller" <[email protected]> wrote in message
news:1h58xxv.5oh1z18g3vorN%[email protected]...
> R.H. <[email protected]> wrote:
>
> > 495. No correct answer yet
>
> 495 is for poking holes into wall paper. If you want to remove wallpaper
> you have to whetten it. The holes you poke in with that useless tool
> should help penetrating the wall paper with water.
My mistake, I skipped a number in the answer post, there may be a similar
tool for wallpaper, but this tool was correctly identified as a carpet seam
roller.
Rob
"Greg G." <[email protected]> wrote in message
news:[email protected]...
> R.H. said:
>
> >"sewiv" <[email protected]> wrote in message
>
> >> Is it one of those "sleepy driver" alarms? Sounds when you nod off?
> >>
> >This answer is correct. Part II of this one is to determine what
mechanism
> >activates the alarm as the driver is falling asleep.
>
> A rolling ball and electrical contacts or a mercury switch - either
> would work.
Mercury switch is correct, there is a photo of it on the answer page:
http://pzphotosan88k.blogspot.com/
Rob
In article <[email protected]>,
R.H. <[email protected]> wrote:
>The latest set has just been posted:
>
>http://puzzlephotos.blogspot.com/
490: 8 pt wrench
491: Pressure cooker valve
492: Binoculars (finally a close-up I get)
493: Musical instrument of the weird kind
494: Alarm to hang on e.g. a motel door
495: Cooking tool, makes dents in dough.
--
There's no such thing as a free lunch, but certain accounting practices can
result in a fully-depreciated one.
"DeepDiver" <[email protected]> wrote in message
news:[email protected]...
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
> >
> > "sewiv" <[email protected]> wrote in message
> > news:[email protected]...
> >>
> >> Is it one of those "sleepy driver" alarms? Sounds when you nod off?
> >
> > This answer is correct. Part II of this one is to determine what
> > mechanism activates the alarm as the driver is falling asleep.
>
> What activates the alarm is when the head tilts down as the driver nods
off.
> What SHOULD activate the alarm is the simple act of hooking it onto your
> ear. If you're so tired that you have to use this device to keep you
awake,
> then you're already too tired to be driving.
I agree that if someone is tired enough to use this device then they
shouldn't be driving, I won't be using it.
Rob
"Wayne Cook" <[email protected]> wrote in message
news:[email protected]...
> On Fri, 28 Oct 2005 19:13:11 GMT, "R.H." <[email protected]> wrote:
>
> >
> >"R.H." <[email protected]> wrote in message
> >news:[email protected]...
> >> The latest set has just been posted:
> >>
> >> http://puzzlephotos.blogspot.com/
> >>
> >
> >
> >
> >Results so far:
> >
> >
> >
> >490. Not sure exactly what this wrench was made for, and haven't been
able
> >to confirm the function of the small piece on the end.
> >
> >491. The seller of this one thought that it was mounted on the end of a
> >pole for reaching a slot to turn a machine on or off. I showed it to a
guy
> >who has been selling tools for over forty years and he seemed sure that
it
> >was a decorative piece from a fancy horse drawn carriage. Haven't found
any
> >info to verify this one yet either.
> >
> There's a chance that it was used to turn old style ceiling fans on
> and off. The really old fans had switches in the central hub that took
> a tool along these lines to turn on and off.
Thanks, I'll see what I can find on that.
Rob
"R.H." <[email protected]> wrote in message
news:[email protected]...
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
Results so far:
490. Not sure exactly what this wrench was made for, and haven't been able
to confirm the function of the small piece on the end.
491. The seller of this one thought that it was mounted on the end of a
pole for reaching a slot to turn a machine on or off. I showed it to a guy
who has been selling tools for over forty years and he seemed sure that it
was a decorative piece from a fancy horse drawn carriage. Haven't found any
info to verify this one yet either.
493. Binocular focus wheel
494. Cigar travel humidor
495. No correct answer yet
496. Carpet seam roller
Rob
"R.H." <[email protected]> wrote in message
news:[email protected]...
>
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
> > The latest set has just been posted:
> >
> > http://puzzlephotos.blogspot.com/
> >
>
>
>
> Results so far:
> 489. This is a hand operated ice cream freezer.
>
>
> 490. Not sure exactly what this wrench was made for, and haven't been
able
> to confirm the function of the small piece on the end.
>
> 491. The seller of this one thought that it was mounted on the end of a
> pole for reaching a slot to turn a machine on or off. I showed it to a
guy
> who has been selling tools for over forty years and he seemed sure that it
> was a decorative piece from a fancy horse drawn carriage. Haven't found
any
> info to verify this one yet either.
>
> 493. Binocular focus wheel
>
> 494. Cigar travel humidor
>
> 495. No correct answer yet
>
> 496. Carpet seam roller
>
>
>
> Rob
>
>
>
>
>
R.H. wrote:
>The latest set has just been posted:
>
>http://puzzlephotos.blogspot.com/
>
>
>Rob
>
>
>
>
From Rec.woodworking
#490: Bike tire tool?
#491: Dunno, looks familiar, though.
#492: Binoculars
#493: Some sort of musical instrument?
#494: Dunno again. Looks familiar.
#495: Looks like one heck of a grinding wheel dresser! Meat
tenderizer. For poking holes in apple pie crusts?!?
"R.H." <[email protected]> wrote in message
news:[email protected]...
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
490 ? If it's a wrench, made for square nuts/bolts. Projection on right;
Hook a loop of wire/string and stretch it over a hook/peg/etc. ?
491 Reminds me of a window opener for those high windows in old schools.
Goes on the end of a wood pole to reach up to latches, but the ones I
remember had a hook on the end.
492 Binoculars
493 Didn't I just see this a while back? Or somewhere else(?) Someone
suggested a portable cigar humidor.
494 ??
495 Seems like something to do with baking, but ? Secret tool used by
"antique" creators for distressing wood?
--
Nahmie
Stupidity is not considered a handicap, park elsewhere.
"DanG" <[email protected]> wrote in message
news:3828f.651$0M1.144@dukeread12...
>
> 495. This is a carpet layers roller, used to disguise seams.
>
> (top posted for your convenience)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Keep the whole world singing . . . .
> DanG (remove the sevens)
> [email protected]
>
>
>
> "Norman D. Crow" <[email protected]> wrote in message
> news:[email protected]...
>>
>> "R.H." <[email protected]> wrote in message
>> news:[email protected]...
>>> The latest set has just been posted:
>>>
>>> http://puzzlephotos.blogspot.com/
>>>
>>>
<snip>
>>
>> 495 Seems like something to do with baking, but ? Secret tool used by
>> "antique" creators for distressing wood?
>>
Darn! Knew I'd seen one somewhere.
--
Nahmie
Stupidity is not considered a handicap, park elsewhere.
"humunculus" <[email protected]> wrote in message
news:[email protected]...
> >493 Didn't I just see this a while back? Or somewhere else(?) Someone
> suggested a portable cigar humidor.
>
>
> Hmmm, maybe so. And the removable thingy at the top holds the matches.
> Could be...
>
No, it has a sponge to soak & then the holes let the moisture into the cigar
storage.
(BTW, you can pull your tongue out of your cheek now)
--
Nahmie
Stupidity is not considered a handicap, park elsewhere.
According to R.H. <[email protected]>:
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
I'm getting into this late. I've been fighting a transition to
a new ISP, and that has limited my web and news access somewhat.
Anyway -- posting from rec.crafts.metalworking again.
490) A strange one. The hole is obviously a wrench for square headed
screws (such as are found on many lathes to lock down
adjustments). The eight points allow re-setting at 45 degree
intervals.
The hook on the left seems to be to allow you to get a grip
while the handle is flat on a surface.
The small projection on the right may be for use in levering
something which may bind. Perhaps for removing a Morse taper
tool as an alternative to the usual drill drift used for that
purpose which requires a light hammer blow.
491) Either a valve for releasing vacuum (or venting steam, except
that I would expect a wooden handle for that purpose), or it may
be a stylized chess piece, based on its size, and where it is
sitting.
492) The focus knob for a center-focus pair of binoculars.
493) Just a guess, but it looks like a portable cigar humidor
to me. The sponge would be wet, and the holes would vent the
humidity into the chamber with the cigars stored therein.
Is it possible to assemble the cylinder with the holes not lined
up? If so, it may be so the holes may be blocked in a spare
cylinder until the other one dries up, and you swap to the
second (or third, etc) cylinder.
494) Hmm ... a hearing aid perhaps? Normally they are made of
flesh-colored plastic, as some wearers are sensitive about that,
but the shape is about right to hang the hook over your ear, the
cylindrical bulge at the bottom is for the battery, the
cylindrical knob just above the power switch (it *is* marked
"off" after all) is the volume control, and I think that a clear
tube would come out of the small hole at the end to feed into an
earpiece.
495) For tenderizing meat, perhaps? Or for perforating a plastic
film as it is glued down to eliminate air bubbles?
Now to see what else has been guessed, and then to go to sleep.
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
R.H. said:
>
>"Greg G." <[email protected]> wrote in message
>news:[email protected]...
>> R.H. said:
>>
>> >"sewiv" <[email protected]> wrote in message
>>
>> >> Is it one of those "sleepy driver" alarms? Sounds when you nod off?
>> >>
>> >This answer is correct. Part II of this one is to determine what
>mechanism
>> >activates the alarm as the driver is falling asleep.
>>
>> A rolling ball and electrical contacts or a mercury switch - either
>> would work.
>
>
>Mercury switch is correct, there is a photo of it on the answer page:
>
>http://pzphotosan88k.blogspot.com/
>
YEA! What did I win... <G>
Greg G.
Wayne Cook Wrote:
> On Fri, 28 Oct 2005 19:13:11 GMT, "R.H." [email protected] wrote:
> [color=blue]
> 495. No correct answer yet
>
495 looks like a tool used to roll over wallpaper before steaming. It
makes a bunch of small holes that allows steam to penetrate the
wallpaper and loosen the glue behind it so the wallpaper can be
removed.
--
joe2